Zigbee2MQTT latest-dev changelog

changelog.md

Improvements

• #11188 Tuya TS0601_dimmer_3: expose backlight brightness and color (@kalitek999)
• #11162 Bosch BTH-RM*: enable auto mode via operating_mode for Home Assistant (@burmistrzak)
• #11176 TCL P2-WT: expose battery (@ryangu)
• #11182 Yandex: support ota (@kirovilya)

Fixes

• #30439 Home Assisant: set state class to measurement for illuminane_raw (@Koenkk)
• #30436 Log error before renaming failed to load converters (@rhysfred)
• #11200 Add E2206 as a whitelabel of IKEA E22xx (@phiphi060)
• #11195 Endpoint configuration limitation for some modernextend's (@kirovilya)
• #11190 J.XUAN WSZ01: fix no action (@ryangu)
• #30439 Tuya RB-SRAIN01: add illuminance_raw unit (@Koenkk)
• #11171 Add IKEA E2223 as a whitelabel of IKEA E2206 (@onurece)
• #11181 Paulmann 948.47/29165: fix color temperature (@chris-1243)
• #11090 Third Reality 3RSM0147Z: remove broken humidity expose (@kbuck1)
• #30424 Third Reality 3RSMR01067Z: fix configure failing (@Koenkk)
• #11180 Tuya M8Pro: fix time (@l1berat0r)
• #11167 Tuya TS0601_smart_scene_knob: adjust brightness and color_temp value ranges (@Bjk8kds)
• #11177 Ubisys J1: fix attribute writing (@andrewandneil)
• #1601 Allow literal (RFC2732) IPv6 addresses in TCP URI (@spike77453)
• #1609 Fix transitionTime not always present in genScenes recall (@Nerivec)

Windfront

Frontend

New supported devices

This release adds support for 16 devices:

• #11189 3RAP0149BZ Third Reality Smart air pressure sensor (@3reality-support)
• #11191 3RPL01084Z Third Reality Multi-function smart presence sensor R3 (@3reality-support)
• #11186 50394 Paulmann LED Filament Bulb tuneable white (@raveit65)
• #11199 929003115901 Philips Hue Perifo cylinder pendant (Black) (@chris-1243)
• #11198 929004611501 Philips Hue white ambiance bathroom ceiling light Adore with Bluetooth (@AntiQliMax-stack)
• #11185 EFEKTA_eAir_Monitor EFEKTA Smart digital carbon dioxide detector with e-ink display. (@smartboxchannel)
• #11192 GA01 Meian Gas sensor (@fenio)
• #11168 BOT-R9V-ZB Beok Wall-mount thermostat (@hvdort)
• #11149 zFlora_X_Max EFEKTA Plant watering sensor zFlora X Max with signal amplifier (@smartboxchannel)
• #11149 MODKAM_Flower EFEKTA Soil moisture sensor MODKAM_Flower, mod DIYRuZ Flower (@smartboxchannel)
• #11149 EFEKTA_ePST_POW_V2 EFEKTA Smart water/gas pressure monitor with e-ink display. (@smartboxchannel)
• #11149 Netuya_CO2_Smart_Box Efektalab CO2 Smart Monitor, rgb indicator, alarm, can control the relay (@smartboxchannel)
• #11149 EFEKTA_PS_POW_PRO EFEKTA Gas, water smart pressure monitor, high-precision and high-stability. (@smartboxchannel)
• #11149 EFEKTA_T1_POW_NTC10K EFEKTA Temperature smart monitor with NTC sensor (@smartboxchannel)
• #11149 EFEKTA_T1_NTC10K EFEKTA Temperature smart monitor with NTC sensor (@smartboxchannel)
• #11149 EFEKTA_DigiBaro EFEKTA Smart digital barometer with e-ink display. (@smartboxchannel)

Fixed device detections

• #30490 Detect _TZE284_q22avxbv as Tongou TOQCB2-80 (@Koenkk)
• #10612 Detect _TZE284_waa352qv as Tuya TS0601_cover_5 (@Koenkk)
• #11172 Detect _TZ3000_8utxxtzr as Tuya TS0215A_remote (@LucasTor)
• #11179 Detect _TZ3210_dkul5xix as Moes ZB-TDA14-RCW-E27-MS (@Bjk8kds)
• #11183 Detect _TZE200_hvaxb2tc as Tuya TS0601_thermostat_5 (@Offebaescher)
• #30438 Detect _TZE200_hyhl5y36 as Merrytek MSA201Z (@Koenkk)
• #30427 Detect _TZE284_9yapgbuv as Tuya TS0601_temperature_humidity_sensor_2 (@Koenkk)

Changelog generator error

@maiandrei Thanks for the guide!

I managed to get mine working by following it. I did have to use your original onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime' though.

Otherwise Zigbee2Mqtt kept renaming my file to tongou.js.invalid.

Hi purchased this Zigbee Room Thermostat recently and unfortunately it's not currently supported
https://www.aliexpress.com/item/1005007126805419.html?spm=a2g0o.order_list.order_list_main.28.6b2c18024rzB2W
Zigbee Model: TS0601
Zigbee Manufacturer: _TZE284_zjhoqbrd
Hope it can be added and I'm struggling to sort out a work around
Regards
Graham

@maiandrei Thanks for the guide!

I managed to get mine working by following it. I did have to use your original onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime' though.

Otherwise Zigbee2Mqtt kept renaming my file to tongou.js.invalid.

You're right, 2 days later I found the devices unsupported and the file invalid.
With that version of onEvent I didn't receive any feedback from device in HA. Do you?
Now I copied code from https://github.com/Koenkk/zigbee-herdsman-converters/blob/eb0faa7c71c6c184cb925f20145c5b2c619fae79/src/devices/tuya.ts#L14797
and, for the moment, everything is OK again.

Hello! I have 4 gang+2 scene (6 buttons) switch.
Not supported yet. Can you add it?

zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE200_mk3mlurj',
description: 'CombZSwitch4A2',

Please add to supported list:

https://www.aliexpress.com/item/1005009024318979.html

`const {iasZoneAlarm, temperature, humidity, battery, illuminance} = require('zigbee-herdsman-converters/lib/modernExtend');

const definition = {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE200_rhgsbacq',
description: 'Automatically generated definition',
extend: [iasZoneAlarm({"zoneType":"generic","zoneAttributes":["alarm_1","alarm_2","tamper","battery_low"]}), temperature(), humidity(), battery(), illuminance()],
meta: {},
};

module.exports = definition;`

Hi purchased this Zigbee Room Thermostat recently and unfortunately it's not currently supported https://www.aliexpress.com/item/1005007126805419.html?spm=a2g0o.order_list.order_list_main.28.6b2c18024rzB2W Zigbee Model: TS0601 Zigbee Manufacturer: _TZE284_zjhoqbrd Hope it can be added and I'm struggling to sort out a work around Regards Graham

i have the same problem

Hi purchased this Zigbee Room Thermostat recently and unfortunately it's not currently supported https://www.aliexpress.com/item/1005007126805419.html?spm=a2g0o.order_list.order_list_main.28.6b2c18024rzB2W Zigbee Model: TS0601 Zigbee Manufacturer: _TZE284_zjhoqbrd Hope it can be added and I'm struggling to sort out a work around Regards Graham

i have the same problem

I've managed to get it working with zigbee2mqtt using an external converter

I named to file "_TZE284_zjhoqbrd.js"
then put it in /homeassistant/zigbee2mqtt/external_converters/

Below is the contents of the .js file

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');
const e = exposes.presets;
const ea = exposes.access;
const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
// Since a lot of Tuya devices use the same modelID, but use different datapoints
// it's necessary to provide a fingerprint instead of a zigbeeModel
fingerprint: [
{
// The model ID from: Device with modelID 'TS0601' is not supported
// You may need to add \u0000 at the end of the name in some cases
modelID: 'TS0601',
// The manufacturer name from: Device with modelID 'TS0601' is not supported.
manufacturerName: '_TZE284_zjhoqbrd',
},
],
model: 'TS0601_ZWT198',
vendor: 'Tuya',
icon: '/icons/ts0601_zwt198.jpg',
description: 'Central Heating Thermostat',
fromZigbee: [tuya.fz.datapoints],
toZigbee: [tuya.tz.datapoints],
onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime'
configure: tuya.configureMagicPacket,
exposes: [
e.binary("factory_reset", ea.STATE_SET, "ON", "OFF").withDescription("Full factory reset, use with caution!"),
e.child_lock(),
e.temperature_sensor_select(["internal", "external", "both"]),
e
.climate()
.withSystemMode(["off", "heat"], ea.STATE_SET)
.withPreset(["manual", "auto", "temporary_manual"])
.withSetpoint("current_heating_setpoint", 5, 35, 0.5, ea.STATE_SET)
.withRunningState(["idle", "heat"], ea.STATE)
.withLocalTemperature(ea.STATE)
.withLocalTemperatureCalibration(-9.9, 9.9, 0.1, ea.STATE_SET),
e.binary("frost_protection", ea.STATE_SET, "ON", "OFF").withDescription("Antifreeze function"),
e
.max_temperature_limit()
.withUnit("°C")
.withValueMin(15)
.withValueMax(90)
.withValueStep(0.5)
.withPreset("default", 60, "Default value")
.withDescription("Maximum upper temperature"),
e
.numeric("deadzone_temperature", ea.STATE_SET)
.withUnit("°C")
.withValueMax(10)
.withValueMin(0.1)
.withValueStep(0.1)
.withPreset("default", 1, "Default value")
.withDescription("The delta between local_temperature (5<t<35)and current_heating_setpoint to trigger Heat"),
e.enum("backlight_mode", ea.STATE_SET, ["off", "low", "medium", "high"]).withDescription("Intensity of the backlight"),
e.enum("working_day", ea.STATE_SET, ["disabled", "6-1", "5-2", "7"]).withDescription("Workday setting"),
e.text("schedule_weekday", ea.STATE_SET).withDescription("Workdays (6 times hh:mm/cc.c°C)"),
e
.text("schedule_holiday", ea.STATE_SET)
.withDescription("Holidays (2 times hh:mm/cc.c°C)"),
// ============== exposes for found, but not functional datapoints:
/*
e.min_temperature_limit() // dp 16
.withValueMin(5)
.withValueMax(15)
.withValueStep(0.5)
.withPreset('default', 10, 'Default value')
.withDescription('dp16 is listed in Tuya, but no communication from device'),

    e.binary('dp105', ea.STATE_SET, 'ON', 'OFF')
        .withDescription('dp105 is not listed in Tuya, but device sends datapoint, binary: true/false'),

    e.binary('dp111', ea.STATE_SET, 'ON', 'OFF')
        .withDescription('dp111 is not listed in Tuya, but device sends datapoint, binary: true/false'),
    */
],
meta: {
    tuyaDatapoints: [
        [1, "system_mode", tuya.valueConverterBasic.lookup({heat: true, off: false})],
        [2, "current_heating_setpoint", tuya.valueConverter.divideBy10],
        [3, "local_temperature", tuya.valueConverter.divideBy10],
        [
            4,
            "preset",
            tuya.valueConverterBasic.lookup((_, device) => {
                // https://github.com/Koenkk/zigbee2mqtt/issues/21353#issuecomment-1938328429
                // https://github.com/Koenkk/zigbee2mqtt/issues/28035
                if (device.manufacturerName === "_TZE204_lzriup1j" || device.manufacturerName === "_TZE204_gops3slb") {
                    return {
                        auto: tuya.enum(1),
                        manual: tuya.enum(0),
                        temporary_manual: tuya.enum(2),
                    };
                }
                return {
                    auto: tuya.enum(0),
                    manual: tuya.enum(1),
                    temporary_manual: tuya.enum(2),
                };
            }),
        ],
        [9, "child_lock", tuya.valueConverter.lockUnlock],
        [11, "faultalarm", tuya.valueConverter.raw],
        [15, "max_temperature_limit", tuya.valueConverter.divideBy10],
        [19, "local_temperature_calibration", tuya.valueConverter.localTempCalibration3],
        [
            101,
            "running_state",
            tuya.valueConverterBasic.lookup({
                heat: tuya.enum(1),
                idle: tuya.enum(0),
            }),
        ],
        [102, "frost_protection", tuya.valueConverter.onOff],
        [103, "factory_reset", tuya.valueConverter.onOff],
        [
            104,
            "working_day",
            tuya.valueConverterBasic.lookup((_, device) => {
                // https://github.com/Koenkk/zigbee2mqtt/issues/23979
                if (device.manufacturerName === "_TZE200_viy9ihs7") {
                    return {
                        disabled: tuya.enum(0),
                        "6-1": tuya.enum(1),
                        "5-2": tuya.enum(2),
                        "7": tuya.enum(3),
                    };
                }
                return {
                    disabled: tuya.enum(0),
                    "6-1": tuya.enum(2),
                    "5-2": tuya.enum(1),
                    "7": tuya.enum(3),
                };
            }),
        ],
        [
            106,
            "sensor",
            tuya.valueConverterBasic.lookup({
                internal: tuya.enum(0),
                external: tuya.enum(1),
                both: tuya.enum(2),
            }),
        ],
        [107, "deadzone_temperature", tuya.valueConverter.divideBy10],
        [109, null, tuya.valueConverter.ZWT198_schedule],
        [109, "schedule_weekday", tuya.valueConverter.ZWT198_schedule],
        [109, "schedule_holiday", tuya.valueConverter.ZWT198_schedule],
        [110, "backlight_mode", tuya.valueConverter.backlightModeOffLowMediumHigh],
        // ============== found but not functional datapoints:

        // [16, 'min_temperature_limit', tuya.valueConverter.divideBy10],  // datapoint listed in Tuya, but no communication from device
        // [105, 'dp105', tuya.valueConverter.onOff],                      // not listed in Tuya, but device sends datapoint
        // [111, 'dp111', tuya.valueConverter.onOff],                      // not listed in Tuya, but device sends datapoint

        // These are the schedule values in bytes, 8 periods in total (4 bytes per period).
        // For each period:
        // 1st byte: hour
        // 2nd byte: minute
        // 3rd, 4th bytes: temperature multiplied by 10
        // On the device last 2 periods are ignored if schedule_mode is 7day. When schedule_mode is disabled,
        // scheduling can't be configured at all on the device.
        // For example, if schedule_mode is weekday/sat+sun and this byte array is received:
        // [6,10,1,144,8,10,0,170,11,40,0,170,12,40,0,170,17,10,0,230,22,10,0,170,8,5,0,200,23,0,0,160]
        // Then the schedule is:
        // Mon-Fri: 6:10 --> 40C, 8:10 --> 17C, 11:40 --> 17C, 12:40 --> 17C, 17:10 --> 23C, 22:10 --> 17C
        // Sat-Sun: 8:05 --> 20C, 23:00 --> 16C
    ],
},

};

module.exports = definition;

@xion2000 many thanks, is working!

@xion2000 thank you very much to made this and info where to place this in the system. It worked for me too. The only thing which is not showing is the battery, I don't have it connected with an USB-C cable but working with 3x AAA batteries.
Is there a possibility to have this info working in your file?

Hi,

I just purchased the EcoDim DIM.06 dimmer but found that is not supported yet.
Would it be possible to add this one?
Thanks in advance.

https://www.123led.nl/EcoDim-Zigbee-stekkerdimmer-0-100W-Fase-afsnijding-RC-EcoDim-DIM-06-i7926-t4329.html

{
"description": "Automatically generated definition",
"exposes": [
{
"features": [
{
"access": 7,
"description": "On/off state of this light",
"label": "State",
"name": "state",
"property": "state",
"type": "binary",
"value_off": "OFF",
"value_on": "ON",
"value_toggle": "TOGGLE"
},
{
"access": 7,
"description": "Brightness of this light",
"label": "Brightness",
"name": "brightness",
"property": "brightness",
"type": "numeric",
"value_max": 254,
"value_min": 0
}
],
"type": "light"
},
{
"access": 2,
"description": "Triggers an effect on the light (e.g. make light blink for a few seconds)",
"label": "Effect",
"name": "effect",
"property": "effect",
"type": "enum",
"values": [
"blink",
"breathe",
"okay",
"channel_change",
"finish_effect",
"stop_effect"
]
},
{
"access": 7,
"category": "config",
"description": "Controls the behavior when the device is powered on after power loss",
"label": "Power-on behavior",
"name": "power_on_behavior",
"property": "power_on_behavior",
"type": "enum",
"values": [
"off",
"on",
"toggle",
"previous"
]
},
{
"access": 1,
"category": "diagnostic",
"description": "Link quality (signal strength)",
"label": "Linkquality",
"name": "linkquality",
"property": "linkquality",
"type": "numeric",
"unit": "lqi",
"value_max": 255,
"value_min": 0
}
],
"model": "eco-dim06-zigbee",
"options": [
{
"access": 2,
"description": "Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to 0 (no transition).",
"label": "Transition",
"name": "transition",
"property": "transition",
"type": "numeric",
"value_min": 0
},
{
"access": 2,
"description": "State actions will also be published as 'action' when true (default false).",
"label": "State action",
"name": "state_action",
"property": "state_action",
"type": "binary",
"value_off": false,
"value_on": true
}
],
"source": "generated",
"supports_ota": false,
"vendor": "EcoDim BV"
}

@xion2000 thank you very much to made this and info where to place this in the system. It worked for me too. The only thing which is not showing is the battery, I don't have it connected with an USB-C cable but working with 3x AAA batteries. Is there a possibility to have this info working in your file?

I have mine working of batteries only also and have the same problem with batteries NOT showing in Zigbee2MQTT unfortunately

Buonasera a tutti, chiedo gentilmente se è possibile aggiungere il seguente dispositivo:

https://italian.alibaba.com/product-detail/subject-1600753083531.html?from=share&ckvia=share_80DFED87F71A45E98E35F2B59887F5D0&needReward=true

export default {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE204_o9d1hdma',
description: 'Automatically generated definition',
extend: [],
meta: {},
};

il dispositivo in questione è praticamente identico ad un dispositivo presente nella lista dispositivi supportati, ne ho 6 in casa mi piacerebbe tantissimo vederli funzionare
https://www.zigbee2mqtt.io/devices/AE-669K.html

Grazie per il vostro prezioso aiuto

Mattia

@mattia9508 ciao,

puoi usare un external converter

guarda qui

Buongiorno, grazie per la risposta, uso HA ormai da 2 anni ma sto entrando solo adesso nell ambito più tecnico, stasera riprovo a seguire meglio la guida su come usare il convertitore esterno. Grazie Il giorno lun 13 ott 2025 alle 09:34 Mattia Marchiorato < ***@***.***> ha scritto:

…

***@***.**** commented on this gist. ------------------------------ @mattia9508 <https://github.com/mattia9508> ciao, puoi usare un external converter guarda qui <Koenkk/zigbee2mqtt#22079> — Reply to this email directly, view it on GitHub <https://gist.github.com/Koenkk/bfd4c3d1725a2cccacc11d6ba51008ba#gistcomment-5800400> or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMNZT2F3TROUVH6W6KR3QQT3XNIY7BFKMF2HI4TJMJ2XIZLTSOBKK5TBNR2WLJZTGUZDONBXGSSG4YLNMWUGCY3UN5ZF62LEQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZQKSXMYLMOVS2IZ3JON2KI3TBNVS2W5DIOJSWCZC7OR4XAZNMON2WE2TFMN2F65DZOBS2WR3JON2EG33NNVSW45FGORXXA2LDOOIYFJDUPFYGLJDHNFZXJJLWMFWHKZNJGEZDGOBQHA2DIN5HORZGSZ3HMVZKMY3SMVQXIZI> . You are receiving this email because you were mentioned. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

Bonjour
Pouvez vous ajouter cet appareil SMT10020 de schneider svp, c'est un capteur d'echauffement des cables

Hi can you add motion and light sensor.
This is the generated external converter :

const {identify, iasZoneAlarm, battery, illuminance} = require('zigbee-herdsman-converters/lib/modernExtend');


const definition = {
    zigbeeModel: ['TS0601'],
    model: 'TS0601',
    vendor: '_TZE200_na5qlzow',
    description: 'Automatically generated definition',
    extend: [identify(), iasZoneAlarm({"zoneType":"generic","zoneAttributes":["alarm_1","alarm_2","tamper","battery_low"]}), battery(), illuminance()],
    meta: {},
};

module.exports = definition;

Another tuya temp/humidity with clock device

export default {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE284_cwyqwqbf',
description: 'Automatically generated definition',
extend: [],
};

Hello can you add the necessary definition for an AVATTO ZDMS16-2
It is a Zigbee Module 2 channels Dimmer.
This is the generated external converter :

{
"last_seen": "2025-11-04T18:34:39.089Z",
"linkquality": 160,
"device": {
"applicationVersion": 78,
"dateCode": "",
"friendlyName": "0xa4c1385b98ce2ed7",
"hardwareVersion": 1,
"ieeeAddr": "0xa4c1385b98ce2ed7",
"manufacturerID": 4417,
"manufacturerName": "_TZE284_jtbgusdc",
"networkAddress": 12724,
"powerSource": "Mains (single phase)",
"stackVersion": 0,
"type": "Router",
"zclVersion": 3
}
}

const definition = {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE284_jtbgusdc',
description: 'Automatically generated definition',
extend: [],
meta: {},
};

module.exports = definition;

Thanks for your efforts.
Kind regards.

Hello can you add the necessary definition for an AVATTO ZDMS16-2 It is a Zigbee Module 2 channels Dimmer. This is the generated external converter :

{ "last_seen": "2025-11-04T18:34:39.089Z", "linkquality": 160, "device": { "applicationVersion": 78, "dateCode": "", "friendlyName": "0xa4c1385b98ce2ed7", "hardwareVersion": 1, "ieeeAddr": "0xa4c1385b98ce2ed7", "manufacturerID": 4417, "manufacturerName": "_TZE284_jtbgusdc", "networkAddress": 12724, "powerSource": "Mains (single phase)", "stackVersion": 0, "type": "Router", "zclVersion": 3 } }

const definition = { zigbeeModel: ['TS0601'], model: 'TS0601', vendor: '_TZE284_jtbgusdc', description: 'Automatically generated definition', extend: [], meta: {}, };

module.exports = definition;

Thanks for your efforts. Kind regards.

That manufacturerID is already supported. Are you using the last version of Zigbee2MQTT?

Reading your answer I went back to my Jeedom and saw that my Zigbee2MQTT version was 1.42.0.
I upgraded to 2.6.3 and then miracle, the module is correctly working.
Many thanks for your quick reaction. I will now buy several modules to go further.
Have a nice day!

Could anyone more skilled than me in Z2M add the new Namron Zigbee Thermostat?
Article No: 4512776
Name: Namron Zigbee termostat for panelovn PRO hvit
Product page link: https://www.elektroimportoren.no/namron-zigbee-termostat-for-panelovn-pro-hvit/4512776/Product.html

I have a Namron Zigbee panel heater released before the new thermostats + oven line were released. I suspect this new thermostat would act much the same way as the existing Namron 540139X would (https://www.zigbee2mqtt.io/devices/540139X.html)

If i could help in any way, please let me know.

Generated external definition (from Z2M Dev Console)

import * as m from 'zigbee-herdsman-converters/lib/modernExtend';

export default {
    zigbeeModel: ['Panel Heater'],
    model: 'Panel Heater',
    vendor: 'NAMRON AS',
    description: 'Automatically generated definition',
    extend: [m.electricityMeter()],
};

{
    "description": "Automatically generated definition",
    "exposes": [
        {
            "access": 5,
            "description": "Instantaneous measured power",
            "label": "Power",
            "name": "power",
            "property": "power",
            "type": "numeric",
            "unit": "W"
        },
        {
            "access": 5,
            "description": "Measured electrical potential value",
            "label": "Voltage",
            "name": "voltage",
            "property": "voltage",
            "type": "numeric",
            "unit": "V"
        },
        {
            "access": 5,
            "description": "Instantaneous measured electrical current",
            "label": "Current",
            "name": "current",
            "property": "current",
            "type": "numeric",
            "unit": "A"
        },
        {
            "access": 5,
            "description": "Sum of consumed energy",
            "label": "Energy",
            "name": "energy",
            "property": "energy",
            "type": "numeric",
            "unit": "kWh"
        },
        {
            "access": 1,
            "category": "diagnostic",
            "description": "Link quality (signal strength)",
            "label": "Linkquality",
            "name": "linkquality",
            "property": "linkquality",
            "type": "numeric",
            "unit": "lqi",
            "value_max": 255,
            "value_min": 0
        }
    ],
    "model": "Panel Heater",
    "options": [
        {
            "access": 2,
            "description": "Calibrates the power value (percentual offset), takes into effect on next report of device.",
            "label": "Power calibration",
            "name": "power_calibration",
            "property": "power_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for power, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Power precision",
            "name": "power_precision",
            "property": "power_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the voltage value (percentual offset), takes into effect on next report of device.",
            "label": "Voltage calibration",
            "name": "voltage_calibration",
            "property": "voltage_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for voltage, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Voltage precision",
            "name": "voltage_precision",
            "property": "voltage_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the current value (percentual offset), takes into effect on next report of device.",
            "label": "Current calibration",
            "name": "current_calibration",
            "property": "current_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for current, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Current precision",
            "name": "current_precision",
            "property": "current_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the energy value (percentual offset), takes into effect on next report of device.",
            "label": "Energy calibration",
            "name": "energy_calibration",
            "property": "energy_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for energy, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Energy precision",
            "name": "energy_precision",
            "property": "energy_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        }
    ],
    "source": "generated",
    "supports_ota": false,
    "vendor": "NAMRON AS"
}