Koenkk/changelog.md

Last active January 3, 2026 21:00

Star (12) You must be signed in to star a gist
Fork (2) You must be signed in to fork a gist

Select an option

Learn more about clone URLs
Clone this repository at <script src="https://gist.github.com/Koenkk/bfd4c3d1725a2cccacc11d6ba51008ba.js"></script>
Save Koenkk/bfd4c3d1725a2cccacc11d6ba51008ba to your computer and use it in GitHub Desktop.

Download ZIP

Zigbee2MQTT latest-dev changelog

Raw

changelog.md

Improvements

Fixes

#1601 Allow literal (RFC2732) IPv6 addresses in TCP URI (@spike77453)
#1609 Fix transitionTime not always present in genScenes recall (@Nerivec)

Windfront

Frontend

New supported devices

This release adds support for 0 devices:

Fixed device detections

Changelog generator error

raduten commented Oct 26, 2025 •

edited

Loading

Another tuya temp/humidity with clock device

export default {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE284_cwyqwqbf',
description: 'Automatically generated definition',
extend: [],
};

jeanlouisbiset commented Nov 4, 2025

Hello can you add the necessary definition for an AVATTO ZDMS16-2
It is a Zigbee Module 2 channels Dimmer.
This is the generated external converter :

{
"last_seen": "2025-11-04T18:34:39.089Z",
"linkquality": 160,
"device": {
"applicationVersion": 78,
"dateCode": "",
"friendlyName": "0xa4c1385b98ce2ed7",
"hardwareVersion": 1,
"ieeeAddr": "0xa4c1385b98ce2ed7",
"manufacturerID": 4417,
"manufacturerName": "_TZE284_jtbgusdc",
"networkAddress": 12724,
"powerSource": "Mains (single phase)",
"stackVersion": 0,
"type": "Router",
"zclVersion": 3
}
}

const definition = {
zigbeeModel: ['TS0601'],
model: 'TS0601',
vendor: '_TZE284_jtbgusdc',
description: 'Automatically generated definition',
extend: [],
meta: {},
};

module.exports = definition;

Thanks for your efforts.
Kind regards.

bernardesarthur commented Nov 4, 2025

Hello can you add the necessary definition for an AVATTO ZDMS16-2 It is a Zigbee Module 2 channels Dimmer. This is the generated external converter :

{ "last_seen": "2025-11-04T18:34:39.089Z", "linkquality": 160, "device": { "applicationVersion": 78, "dateCode": "", "friendlyName": "0xa4c1385b98ce2ed7", "hardwareVersion": 1, "ieeeAddr": "0xa4c1385b98ce2ed7", "manufacturerID": 4417, "manufacturerName": "_TZE284_jtbgusdc", "networkAddress": 12724, "powerSource": "Mains (single phase)", "stackVersion": 0, "type": "Router", "zclVersion": 3 } }

const definition = { zigbeeModel: ['TS0601'], model: 'TS0601', vendor: '_TZE284_jtbgusdc', description: 'Automatically generated definition', extend: [], meta: {}, };

module.exports = definition;

Thanks for your efforts. Kind regards.

That manufacturerID is already supported. Are you using the last version of Zigbee2MQTT?

jeanlouisbiset commented Nov 5, 2025

Reading your answer I went back to my Jeedom and saw that my Zigbee2MQTT version was 1.42.0.
I upgraded to 2.6.3 and then miracle, the module is correctly working.
Many thanks for your quick reaction. I will now buy several modules to go further.
Have a nice day!

Frikk commented Nov 23, 2025

Could anyone more skilled than me in Z2M add the new Namron Zigbee Thermostat?
Article No: 4512776
Name: Namron Zigbee termostat for panelovn PRO hvit
Product page link: https://www.elektroimportoren.no/namron-zigbee-termostat-for-panelovn-pro-hvit/4512776/Product.html

I have a Namron Zigbee panel heater released before the new thermostats + oven line were released. I suspect this new thermostat would act much the same way as the existing Namron 540139X would (https://www.zigbee2mqtt.io/devices/540139X.html)

If i could help in any way, please let me know.

Generated external definition (from Z2M Dev Console)

import * as m from 'zigbee-herdsman-converters/lib/modernExtend';

export default {
    zigbeeModel: ['Panel Heater'],
    model: 'Panel Heater',
    vendor: 'NAMRON AS',
    description: 'Automatically generated definition',
    extend: [m.electricityMeter()],
};

{
    "description": "Automatically generated definition",
    "exposes": [
        {
            "access": 5,
            "description": "Instantaneous measured power",
            "label": "Power",
            "name": "power",
            "property": "power",
            "type": "numeric",
            "unit": "W"
        },
        {
            "access": 5,
            "description": "Measured electrical potential value",
            "label": "Voltage",
            "name": "voltage",
            "property": "voltage",
            "type": "numeric",
            "unit": "V"
        },
        {
            "access": 5,
            "description": "Instantaneous measured electrical current",
            "label": "Current",
            "name": "current",
            "property": "current",
            "type": "numeric",
            "unit": "A"
        },
        {
            "access": 5,
            "description": "Sum of consumed energy",
            "label": "Energy",
            "name": "energy",
            "property": "energy",
            "type": "numeric",
            "unit": "kWh"
        },
        {
            "access": 1,
            "category": "diagnostic",
            "description": "Link quality (signal strength)",
            "label": "Linkquality",
            "name": "linkquality",
            "property": "linkquality",
            "type": "numeric",
            "unit": "lqi",
            "value_max": 255,
            "value_min": 0
        }
    ],
    "model": "Panel Heater",
    "options": [
        {
            "access": 2,
            "description": "Calibrates the power value (percentual offset), takes into effect on next report of device.",
            "label": "Power calibration",
            "name": "power_calibration",
            "property": "power_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for power, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Power precision",
            "name": "power_precision",
            "property": "power_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the voltage value (percentual offset), takes into effect on next report of device.",
            "label": "Voltage calibration",
            "name": "voltage_calibration",
            "property": "voltage_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for voltage, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Voltage precision",
            "name": "voltage_precision",
            "property": "voltage_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the current value (percentual offset), takes into effect on next report of device.",
            "label": "Current calibration",
            "name": "current_calibration",
            "property": "current_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for current, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Current precision",
            "name": "current_precision",
            "property": "current_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        },
        {
            "access": 2,
            "description": "Calibrates the energy value (percentual offset), takes into effect on next report of device.",
            "label": "Energy calibration",
            "name": "energy_calibration",
            "property": "energy_calibration",
            "type": "numeric",
            "value_step": 0.1
        },
        {
            "access": 2,
            "description": "Number of digits after decimal point for energy, takes into effect on next report of device. This option can only decrease the precision, not increase it.",
            "label": "Energy precision",
            "name": "energy_precision",
            "property": "energy_precision",
            "type": "numeric",
            "value_max": 3,
            "value_min": 0
        }
    ],
    "source": "generated",
    "supports_ota": false,
    "vendor": "NAMRON AS"
}