Created
September 18, 2025 09:55
-
-
Save suchmememanyskill/77fc26b83184c6255e4c7a8adf223334 to your computer and use it in GitHub Desktop.
Elegoo app strings diff 1.1.40 -> 1.1.42
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| diff --git a/1.1.40.txt b/1.1.42.txt | |
| index 9e11fbd..5eb391e 100644 | |
| --- a/1.1.40.txt | |
| +++ b/1.1.42.txt | |
| @@ -1,3 +1,4 @@ | |
| +ptcE | |
| /lib/ld-linux-armhf.so.3 | |
| librt.so.1 | |
| _ITM_deregisterTMCloneTable | |
| @@ -100,12 +101,15 @@ pthread_join | |
| pthread_create | |
| pthread_cancel | |
| sendto | |
| +pthread_once | |
| pthread_rwlock_wrlock | |
| __errno_location | |
| __pthread_unwind_next | |
| lseek | |
| send | |
| +nanosleep | |
| waitpid | |
| +pthread_attr_setdetachstate | |
| pthread_cond_signal | |
| pthread_attr_setschedparam | |
| pthread_mutex_lock | |
| @@ -209,6 +213,55 @@ sws_scale | |
| sws_freeContext | |
| libx264.so.157 | |
| libpng12.so.0 | |
| +png_get_rowbytes | |
| +png_create_write_struct | |
| +png_set_filler | |
| +png_get_bit_depth | |
| +png_create_info_struct | |
| +png_get_image_height | |
| +png_write_info | |
| +png_get_image_width | |
| +png_write_row | |
| +png_write_end | |
| +png_set_expand_gray_1_2_4_to_8 | |
| +png_set_IHDR | |
| +png_destroy_read_struct | |
| +png_get_color_type | |
| +png_get_channels | |
| +png_set_read_fn | |
| +png_read_row | |
| +png_init_io | |
| +png_create_read_struct | |
| +png_destroy_write_struct | |
| +png_set_strip_alpha | |
| +png_set_palette_to_rgb | |
| +png_read_info | |
| +png_get_io_ptr | |
| +png_set_rgb_to_gray | |
| +png_set_bgr | |
| +libjpeg.so.8 | |
| +libturbojpeg.so.0 | |
| +tjGetErrorStr2 | |
| +tjDecompress2 | |
| +tjInitDecompress | |
| +tjDestroy | |
| +tjDecompressHeader3 | |
| +libmodbus.so.5 | |
| +modbus_strerror | |
| +modbus_connect | |
| +modbus_read_input_bits | |
| +modbus_set_slave | |
| +modbus_rtu_set_serial_mode | |
| +modbus_set_response_timeout | |
| +modbus_set_debug | |
| +modbus_close | |
| +modbus_write_register | |
| +modbus_write_registers | |
| +modbus_free | |
| +modbus_read_input_registers | |
| +modbus_new_rtu | |
| +modbus_read_registers | |
| +modbus_set_byte_timeout | |
| libagora-rtc-sdk.so | |
| agora_rtc_logout_rtm | |
| agora_rtc_get_connection_info | |
| @@ -217,12 +270,15 @@ agora_rtc_destroy_connection | |
| agora_rtc_set_bwe_param | |
| agora_rtc_create_connection | |
| agora_rtc_err_2_str | |
| +agora_rtc_send_rtm_data | |
| agora_rtc_leave_channel | |
| agora_rtc_join_channel | |
| agora_rtc_fini | |
| agora_rtc_init | |
| +agora_rtc_send_video_data | |
| libstdc++.so.6 | |
| _ZNSt13random_device9_M_getvalEv | |
| +_ZSt20__throw_future_errori | |
| _ZSt9use_facetISt5ctypeIcEERKT_RKSt6locale | |
| _ZTVSt14overflow_error | |
| _ZTISt9exception | |
| @@ -232,6 +288,8 @@ _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE4findEcj | |
| _ZNSt12domain_errorC1ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE | |
| _Znaj | |
| __cxa_begin_catch | |
| +_ZNSt6chrono3_V212system_clock3nowEv | |
| +_ZTISt12future_error | |
| _ZSt7getlineIcSt11char_traitsIcESaIcEERSt13basic_istreamIT_T0_ES7_RNSt7__cxx1112basic_stringIS4_S5_T1_EES4_ | |
| _ZSt28_Rb_tree_rebalance_for_erasePSt18_Rb_tree_node_baseRS_ | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE6assignEPKc | |
| @@ -241,9 +299,12 @@ _ZNSt6localeC1ERKS_ | |
| _ZdaPv | |
| _ZNSt7__cxx1119basic_istringstreamIcSt11char_traitsIcESaIcEED1Ev | |
| _ZNSt13runtime_errorC2ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE | |
| +_ZNSt13__future_base12_Result_baseC2Ev | |
| +_ZNSt12future_errorD1Ev | |
| _ZNSt14overflow_errorD1Ev | |
| _ZNSt16invalid_argumentD1Ev | |
| _ZTISt12out_of_range | |
| +_ZSt15__once_callable | |
| _ZNSo9_M_insertIeEERSoT_ | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEC1EOS4_ | |
| _ZNSt7__cxx1118basic_stringstreamIcSt11char_traitsIcESaIcEED1Ev | |
| @@ -266,14 +327,17 @@ _ZNSt11logic_errorC2ERKS_ | |
| _ZNSt16invalid_argumentC1EPKc | |
| _ZNSo9_M_insertIlEERSoT_ | |
| _ZTVSt12domain_error | |
| +_ZSt15future_categoryv | |
| _ZNSt14overflow_errorC1ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE | |
| _ZNKSt13runtime_error4whatEv | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE9_M_appendEPKcj | |
| _ZSt16__throw_bad_castv | |
| +_ZTTNSt7__cxx1119basic_ostringstreamIcSt11char_traitsIcESaIcEEE | |
| _ZTISt12domain_error | |
| _ZTTSt14basic_ofstreamIcSt11char_traitsIcEE | |
| _ZNKSt6locale2id5_M_idEv | |
| _ZNSt12__basic_fileIcED1Ev | |
| +_ZSt17rethrow_exceptionNSt15__exception_ptr13exception_ptrE | |
| _ZNSt6localeC1Ev | |
| _ZNSi10_M_extractIlEERSiRT_ | |
| _ZSt4cerr | |
| @@ -286,6 +350,7 @@ __cxa_pure_virtual | |
| _ZNSt13basic_fstreamIcSt11char_traitsIcEED1Ev | |
| __aeabi_atexit | |
| _ZNSt14basic_ifstreamIcSt11char_traitsIcEED1Ev | |
| +_ZNSt6chrono3_V212steady_clock3nowEv | |
| _ZTVSt9basic_iosIcSt11char_traitsIcEE | |
| _ZNKSt7__cxx1115basic_stringbufIcSt11char_traitsIcESaIcEE3strEv | |
| _ZTTSt14basic_ifstreamIcSt11char_traitsIcEE | |
| @@ -298,6 +363,7 @@ _ZNSi5tellgEv | |
| __gxx_personality_v0 | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE4copyEPcjj | |
| _ZTISt5ctypeIcE | |
| +_ZTVNSt7__cxx1119basic_ostringstreamIcSt11char_traitsIcESaIcEEE | |
| _ZNSt7__cxx1115basic_stringbufIcSt11char_traitsIcESaIcEED0Ev | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE6resizeEjc | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE6insertEjPKc | |
| @@ -305,12 +371,14 @@ _ZnwjRKSt9nothrow_t | |
| _ZNKSt5ctypeIcE13_M_widen_initEv | |
| _ZSt29_Rb_tree_insert_and_rebalancebPSt18_Rb_tree_node_baseS0_RS_ | |
| _ZNSt14basic_ofstreamIcSt11char_traitsIcEED1Ev | |
| +_ZNSt18condition_variable10notify_oneEv | |
| _ZSt9use_facetINSt7__cxx117collateIcEEERKT_RKSt6locale | |
| _ZSt7nothrow | |
| _ZNSt12out_of_rangeD1Ev | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE5eraseEjj | |
| _ZNSt13basic_filebufIcSt11char_traitsIcEED1Ev | |
| __cxa_throw | |
| +_ZSt17current_exceptionv | |
| _ZTTNSt7__cxx1119basic_istringstreamIcSt11char_traitsIcESaIcEEE | |
| __cxa_guard_abort | |
| _ZSt17__throw_bad_allocv | |
| @@ -318,6 +386,7 @@ _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEED1Ev | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE5rfindEcj | |
| _ZNKSt8__detail20_Prime_rehash_policy14_M_need_rehashEjjj | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE12_M_constructEjc | |
| +_ZSt11__once_call | |
| _ZTTSt13basic_fstreamIcSt11char_traitsIcEE | |
| __cxa_end_cleanup | |
| _ZNSt8ios_base4InitD1Ev | |
| @@ -333,9 +402,11 @@ __cxa_end_catch | |
| __cxa_guard_acquire | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE7reserveEj | |
| _ZNSt13basic_filebufIcSt11char_traitsIcEE4openEPKcSt13_Ios_Openmode | |
| +_ZNSt13__future_base12_Result_baseD2Ev | |
| _ZTVSt13basic_filebufIcSt11char_traitsIcEE | |
| _ZTVSt15basic_streambufIcSt11char_traitsIcEE | |
| _ZNSt13runtime_errorC2EPKc | |
| +_ZTINSt13__future_base12_Result_baseE | |
| _ZNKSt9type_infoeqERKS_ | |
| _ZNSt13runtime_errorC1ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE | |
| _ZNSolsEPSt15basic_streambufIcSt11char_traitsIcEE | |
| @@ -347,21 +418,26 @@ _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE4swapERS4_ | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE14_M_replace_auxEjjjc | |
| _ZTVNSt7__cxx1119basic_istringstreamIcSt11char_traitsIcESaIcEEE | |
| _ZNSt8ios_base4InitC1Ev | |
| +_ZTVSt12future_error | |
| _ZSt24__throw_invalid_argumentPKc | |
| _ZTISt11regex_error | |
| _ZNSt8ios_baseD2Ev | |
| _ZNSt13runtime_errorC1EPKc | |
| +_ZTINSt6thread6_StateE | |
| +_ZNSt7__cxx1119basic_ostringstreamIcSt11char_traitsIcESaIcEED1Ev | |
| _ZTISt13runtime_error | |
| _ZTINSt6locale5facetE | |
| _ZNSo9_M_insertIxEERSoT_ | |
| __dynamic_cast | |
| _ZSt19__throw_logic_errorPKc | |
| +_ZNSt6thread6_StateD2Ev | |
| _ZSt18_Rb_tree_incrementPSt18_Rb_tree_node_base | |
| _ZSt25__throw_bad_function_callv | |
| _ZTVSt14basic_ifstreamIcSt11char_traitsIcEE | |
| _ZNSt7__cxx1118basic_stringstreamIcSt11char_traitsIcESaIcEEC1ESt13_Ios_Openmode | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE12find_last_ofEPKcjj | |
| _ZNKSt12__basic_fileIcE7is_openEv | |
| +_ZNSt15__exception_ptr13exception_ptrC1ERKS0_ | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE4findEPKcjj | |
| _ZSt4cout | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE9push_backEc | |
| @@ -371,6 +447,7 @@ _ZSt18_Rb_tree_decrementPSt18_Rb_tree_node_base | |
| _ZNSt14overflow_errorD2Ev | |
| _ZNSt9basic_iosIcSt11char_traitsIcEE4initEPSt15basic_streambufIcS1_E | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE17find_first_not_ofEPKcjj | |
| +_ZNSt6thread15_M_start_threadESt10unique_ptrINS_6_StateESt14default_deleteIS1_EEPFvvE | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE17find_first_not_ofEcj | |
| _ZNSt7__cxx1115basic_stringbufIcSt11char_traitsIcESaIcEE7_M_syncEPcjj | |
| __cxa_throw_bad_array_new_length | |
| @@ -378,6 +455,7 @@ _ZSt11_Hash_bytesPKvjj | |
| _ZNSt16invalid_argumentC1ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE | |
| _ZNSi4readEPci | |
| _ZTISt14overflow_error | |
| +_ZNSt6thread4joinEv | |
| _ZTTNSt7__cxx1118basic_stringstreamIcSt11char_traitsIcESaIcEEE | |
| _ZNSi5seekgExSt12_Ios_Seekdir | |
| _ZNSo5seekpExSt12_Ios_Seekdir | |
| @@ -387,9 +465,12 @@ _ZTVN10__cxxabiv119__pointer_type_infoE | |
| _ZSt16__ostream_insertIcSt11char_traitsIcEERSt13basic_ostreamIT_T0_ES6_PKS3_i | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE16find_last_not_ofEPKcjj | |
| _ZNSt18condition_variableC1Ev | |
| +_ZNSt15__exception_ptr13exception_ptr4swapERS0_ | |
| +_ZNSt28__atomic_futex_unsigned_base19_M_futex_notify_allEPj | |
| _ZNSt13runtime_errorD1Ev | |
| _ZNSo9_M_insertImEERSoT_ | |
| _ZNSo9_M_insertIyEERSoT_ | |
| +__once_proxy | |
| _ZNSo9_M_insertIbEERSoT_ | |
| _ZNSt9basic_iosIcSt11char_traitsIcEE5clearESt12_Ios_Iostate | |
| _ZNSt12domain_errorD1Ev | |
| @@ -397,17 +478,22 @@ _ZNSt13basic_filebufIcSt11char_traitsIcEEC1Ev | |
| _ZNSolsEi | |
| _ZNSirsERi | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE9_M_createERjj | |
| +_ZNSt11logic_errorC2ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE | |
| _ZdlPvj | |
| __cxa_rethrow | |
| _Znwj | |
| +_ZNSt6thread6detachEv | |
| _ZTISt16invalid_argument | |
| _ZTVSt13basic_fstreamIcSt11char_traitsIcEE | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE9_M_assignERKS4_ | |
| _ZSt20__throw_system_errori | |
| _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE6appendEPKc | |
| _ZdlPvRKSt9nothrow_t | |
| +_ZNSt28__atomic_futex_unsigned_base19_M_futex_wait_untilEPjjbNSt6chrono8durationIxSt5ratioILx1ELx1EEEENS2_IxS3_ILx1ELx1000000000EEEE | |
| +_ZNSt15__exception_ptreqERKNS_13exception_ptrES2_ | |
| _ZNKSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEE13find_first_ofEPKcjj | |
| _ZTVN10__cxxabiv120__si_class_type_infoE | |
| +_ZNSt15__exception_ptr13exception_ptrD1Ev | |
| _ZNSt5ctypeIcE2idE | |
| _ZSt9terminatev | |
| _ZNSo9_M_insertIdEERSoT_ | |
| @@ -522,6 +608,7 @@ fdatasync | |
| fgets | |
| calloc | |
| strlen | |
| +prctl | |
| sigemptyset | |
| memset | |
| strstr | |
| @@ -624,8 +711,7 @@ __bss_start | |
| __bss_start__ | |
| __bss_end__ | |
| __end__ | |
| -_end | |
| -/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/ts:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/freetype:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/wpa_client:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/openssl:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/curl:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/uuid:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/zlib:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/bz2:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/png:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/nghttp2:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/unistring:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/tasn1:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/hogweed:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/gmp:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/opus:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/nettle:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/gnutls:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/x264:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/alsa:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/ffmpeg:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/agora | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/ts:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/freetype:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/wpa_client:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/openssl:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/curl:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/uuid:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/zlib:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/bz2:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/png:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/jpeg:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/nghttp2:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/unistring:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/tasn1:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/hogweed:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/gmp:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/opus:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/nettle:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/gnutls:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/x264:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/alsa:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/ffmpeg:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/modbus:/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/lib/agora | |
| _ZTI12MCUException | |
| _ctype | |
| default_opts | |
| @@ -633,18 +719,26 @@ GLIBC_2.4 | |
| LIBSWSCALE_5 | |
| LIBAVUTIL_56 | |
| UUID_1.0 | |
| +TURBOJPEG_2.0 | |
| +TURBOJPEG_1.4 | |
| +TURBOJPEG_1.0 | |
| +TURBOJPEG_1.2 | |
| LIBAVCODEC_58 | |
| OPENSSL_1_1_0 | |
| GCC_3.5 | |
| +PNG12_0 | |
| LIBAVFORMAT_58 | |
| CXXABI_1.3.5 | |
| -GLIBCXX_3.4.14 | |
| CXXABI_1.3.8 | |
| CXXABI_ARM_1.3.3 | |
| +GLIBCXX_3.4.14 | |
| +GLIBCXX_3.4.19 | |
| CXXABI_1.3.9 | |
| -GLIBCXX_3.4.11 | |
| +GLIBCXX_3.4.22 | |
| +CXXABI_1.3.3 | |
| GLIBCXX_3.4.18 | |
| GLIBCXX_3.4.9 | |
| +GLIBCXX_3.4.11 | |
| CXXABI_1.3 | |
| GLIBCXX_3.4.20 | |
| GLIBCXX_3.4 | |
| @@ -654,93 +748,18 @@ GLIBC_2.8 | |
| GLIBC_PRIVATE | |
| GLIBC_2.9 | |
| GLIBC_2.7 | |
| +?(j@ | |
| ?p@- | |
| ?p@- | |
| Y@p@- | |
| MbP? | |
| MbP? | |
| MbP? | |
| -?HN> | |
| -?HN> | |
| -?HN> | |
| -?HN> | |
| -<HN> | |
| -?HN> | |
| -?HN> | |
| -Mb`?$ | |
| -?)`8 | |
| -`m@)`8 | |
| -`m@)`8 | |
| -@o@)`8 | |
| -I@)`8 | |
| -I@)`8 | |
| -@)`8 | |
| -9@)`8 | |
| -9@)`8 | |
| -9@)`8 | |
| -I@)`8 | |
| -I@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -?)`8 | |
| -?)`8 | |
| +?p@- | |
| +zd?1 | |
| +Mb`?D | |
| HhuT@ | |
| -@o@)`8 | |
| -^@)`8 | |
| -4@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@`@)`8 | |
| HhuT@ | |
| -^@)`8 | |
| -4@)`8 | |
| -@)`8 | |
| -@)`8 | |
| ->@)`8 | |
| -Y@)`8 | |
| -R@)`8 | |
| -?)`8 | |
| -@)`8 | |
| -@)`8 | |
| -I@)`8 | |
| -?)`8 | |
| -?)`8 | |
| ->@)`8 | |
| -?)`8 | |
| -?)`8 | |
| -?)`8 | |
| -?)`8 | |
| -?)`8 | |
| -?)`8 | |
| -?)`8 | |
| -?)`8 | |
| -^@)`8 | |
| -@)`8 | |
| -N@)`8 | |
| -@j@)`8 | |
| ->@)`8 | |
| -I@)`8 | |
| -@)`8 | |
| -A@)`8 | |
| ->@)`8 | |
| -a@)`8 | |
| -.@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -?)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| -?)`8 | |
| -@)`8 | |
| -@)`8 | |
| -@)`8 | |
| Mb`? | |
| HhuT@ | |
| 333333 | |
| @@ -777,60 +796,52 @@ MbP?i | |
| MbP? | |
| 333333 | |
| MbP? | |
| +MbP? | |
| G{6N | |
| ZG{6 | |
| -9@tV> | |
| -?tV> | |
| 333333 | |
| -.@4V> | |
| : F | |
| +o@!YB | |
| +<!YB | |
| Mb`? | |
| MbP? | |
| ?p@- | |
| ->HN> | |
| +p@45 | |
| +@ha? | |
| +@p@- | |
| MGk6^ | |
| -@HW> | |
| ?0@- | |
| -ACp@- | |
| +@p@- | |
| +@p@- | |
| ffff | |
| _CST | |
| ffff | |
| ?p@- | |
| @0@- | |
| -Y@x0 | |
| MbP? | |
| MbP? | |
| I@0@- | |
| fffff | |
| -@-36 | |
| MbP? | |
| cAp@- | |
| MbP? | |
| -MbP?@s7 | |
| -?PX> | |
| -MbP?@s7 | |
| -MbP?@s7 | |
| -MbP?@s7 | |
| +MbP? | |
| +MbP?P | |
| +MbP?P | |
| +MbP?P | |
| ?p@- | |
| ?p@- | |
| ffff | |
| ffff | |
| -?HN> | |
| -?\N> | |
| ?p@- | |
| Y@`{ | |
| Y@b{ | |
| *I" | |
| -+SLJ | |
| -$@80 | |
| -?HN> | |
| Z 0N | |
| Z 0B | |
| @333333 | |
| -f@0Y> | |
| -Y@x9 | |
| -@pN> | |
| -$@|t | |
| +?p@- | |
| +$@>O | |
| *I" | |
| *I2 | |
| ^oyd | |
| @@ -839,7 +850,6 @@ A<?~v | |
| ?2s"\ | |
| ?{R= | |
| ?0@- | |
| -T@j/ | |
| MbP? | |
| MbP? | |
| Mb`? | |
| @@ -847,8 +857,6 @@ Mb`? | |
| ?ffffff | |
| ! @ffffff | |
| yE>0@- | |
| -i@PO> | |
| -i@PO> | |
| 333333 | |
| ?p@- | |
| ?AJ? | |
| @@ -859,7 +867,7 @@ _5=Q | |
| >VUUUUU | |
| ?f2 | |
| ]L[;^*[ | |
| -? N> | |
| +? j@ | |
| MbP?0@- | |
| MbP? | |
| MbP?c/ | |
| @@ -880,29 +888,44 @@ fffff | |
| %^C{7 | |
| C{7^ | |
| $@)\ | |
| +?!YB | |
| Y@p@- | |
| MbP? | |
| Y@d0 | |
| +?D4H | |
| z>@0 | |
| z>$0 | |
| -?pN> | |
| ->|v8 | |
| : F | |
| ?p@- | |
| ?p@- | |
| +@cRH | |
| +@cRH | |
| +@cRH | |
| +@cRH | |
| +@o@X | |
| +Ga<@ | |
| +@cRH | |
| +@cRH | |
| +@cRH | |
| +@j@p@- | |
| +0`Rs0 | |
| +0bRs0 | |
| +0bRs0 | |
| +0aRs0 | |
| +4@DHH | |
| H{7N | |
| -380@3 | |
| -090@#p@- | |
| +?0@- | |
| +3A0@3 | |
| +0B0@#p@- | |
| %@Pn | |
| JH{6 | |
| -Y@ 0 | |
| -b@\` | |
| -b@r` | |
| >333? | |
| +I@0@- | |
| N@00 | |
| -JH{6 | |
| +JD{7 | |
| +@p@- | |
| >p@- | |
| -?@-? | |
| +Y@x= | |
| @gBt@ | |
| `gBv` | |
| :ZOD | |
| @@ -913,23 +936,25 @@ Z?c2 | |
| ?aCoc | |
| 0C"s | |
| 0C"s | |
| -360@3 | |
| +3?0@3 | |
| BB = | |
| basic_string::_M_construct null not valid | |
| + set id < 0 | |
| +/dev/null | |
| +printf /dev/null failed | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/main.cpp | |
| ===============system info============= | |
| Current pid: %d | |
| %Y-%m-%d %H:%M:%S | |
| Current Date and Time: %s | |
| -13:35:33 | |
| -Aug 13 2025 | |
| +15:09:03 | |
| +Sep 5 2025 | |
| Compiled on: %s at %s | |
| System Name: %s | |
| Node Name: %s | |
| Release: %s | |
| -Version: %s | |
| Machine: %s | |
| -1.1.40 | |
| +1.1.42 | |
| FW Version: %s | |
| CHIPID:%s | |
| %d-%d %d:%d:%d | |
| @@ -943,12 +968,7 @@ wifi | |
| /usr/share/udhcpc/default.script | |
| sdcp init !!! | |
| sem_wait finish !!! | |
| -echo setbl > /sys/kernel/debug/dispdbg/command | |
| -echo lcd0 > /sys/kernel/debug/dispdbg/name | |
| -echo 191 > /sys/kernel/debug/dispdbg/param | |
| -echo 1 > /sys/kernel/debug/dispdbg/start | |
| rm %s/*.tmp | |
| -1.1.40-W | |
| FDM STARTUP!!! %s | |
| Caught SIGPIPE | |
| http://connect.rom.miui.com/generate_204 | |
| @@ -1203,12 +1223,12 @@ tcgetattr( fd_uart,&oldtio) -> %d | |
| com set error | |
| set done! | |
| init_dsp_uart OK | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM9ClockSyncFvR11ParseResultEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM9ClockSyncFv11ParseResultEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM9ClockSyncFvR11ParseResultEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM9ClockSyncFvR11ParseResultEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM9ClockSyncFv11ParseResultEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM9ClockSyncFvR11ParseResultEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM9ClockSyncFvR11ParseResultEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM9ClockSyncFv11ParseResultEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM9ClockSyncFvR11ParseResultEEE | |
| 9ClockSync | |
| St5_BindIFSt7_Mem_fnIM9ClockSyncFvR11ParseResultEEP13ClockSyncMainSt12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM9ClockSyncFv11ParseResultEEP13SecondarySyncSt12_PlaceholderILi1EEEE | |
| @@ -1338,26 +1358,27 @@ file(%s) info has been removed from file_manager'vector | |
| file(%s) info not found in file_manager'vector | |
| Error access file %s | |
| remove same file(%s) info from file_manager vector | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13GCodeDispatchFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13GCodeDispatchFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7GCodeIOFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEbEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13GCodeDispatchFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13GCodeDispatchFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7GCodeIOFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEbEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13GCodeDispatchFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13GCodeDispatchFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7GCodeIOFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEbEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13GCodeDispatchFvvEEE | |
| St5_BindIFSt7_Mem_fnIM13GCodeDispatchFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM13GCodeDispatchFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM7GCodeIOFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEbEEPS1_St12_PlaceholderILi1EESC_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM13GCodeDispatchFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEPS1_St12_PlaceholderILi1EEEE | |
| +update_gcode_handlers | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/gcode.cpp | |
| Disconnect | |
| Ready | |
| @@ -1389,7 +1410,9 @@ M106 | |
| Printer is not ready - not all commands available. | |
| Available extended commands: | |
| Shutdown | |
| +register_command func is nullptr | |
| ready_gcode_handlers.erase(it) | |
| +cmd already registered: %s | |
| klippy:ready:GCodeDispatch | |
| klippy:shutdown:GCodeDispatch | |
| klippy:disconnect:GCodeDispatch | |
| @@ -1406,7 +1429,6 @@ ECHO | |
| HELP | |
| basic_string::basic_string | |
| No response from MCU | |
| -single_command<%s> | |
| PrusaSlicer | |
| AnycubicSlicer | |
| Cura_SteamEngine | |
| @@ -1418,7 +1440,8 @@ mkdir -p %s | |
| gcode_preview | |
| opendir %s failed, errno: %s | |
| MGmg | |
| -; thumbnail begin | |
| +0xFF%s | |
| +colour_count %d color %s --> 0x%08X | |
| %dx%d | |
| ; thumbnail end | |
| %s/%s.%s | |
| @@ -1426,15 +1449,18 @@ estimated printing time (normal mode) | |
| %02dd%02dh%02dm%02ds | |
| bed_temperature | |
| filament_type | |
| -initial_filament | |
| -total layers count | |
| +filament_types %d --> %s | |
| +total filament used [g] | |
| filament used [g] | |
| +default_filament_colour | |
| +default_filament_colour = # | |
| TIME_ELAPSED | |
| TIME | |
| %02dh%02dm | |
| total layers count: %d | |
| LAYER_COUNT | |
| -total filament used [g] | |
| +; thumbnail begin | |
| +total layers count | |
| ([0-9]{1,2}d)?([0-9]{1,2}h)?([0-9]{1,2}m)?([0-9]{1,2}s)? | |
| 12MCUException | |
| start_reason | |
| @@ -1455,7 +1481,6 @@ stepper_enable | |
| force_move | |
| query_endstops | |
| heaters | |
| -model | |
| fan_generic | |
| heater_fan | |
| query_adc | |
| @@ -1479,6 +1504,13 @@ neopixel | |
| break_save | |
| temperature_sensor | |
| change_filament | |
| +multi_color | |
| +filament_switch_sensor | |
| +custom_filament_switch_sensor | |
| +plug_detect_sensor | |
| +fan_cover_sensor | |
| +filament_wrap_sensor | |
| +cut_sensor | |
| pritf read_config | |
| pins | |
| user section = | |
| @@ -1505,15 +1537,15 @@ redo register_event_homing_handler event = | |
| x_adjust | |
| y_adjust | |
| z_adjust | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFv11ParseResultEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFvbEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFvvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM3MCUFv11ParseResultEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM3MCUFvbEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFvbEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFv11ParseResultEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM3MCUFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM3MCUFv11ParseResultEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM3MCUFvbEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM3MCUFv11ParseResultEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM3MCUFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM3MCUFvbEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM3MCUFv11ParseResultEEE | |
| 7McuChip | |
| St5_BindIFSt7_Mem_fnIM3MCUFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM3MCUFvbEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -1521,22 +1553,6 @@ St5_BindIFSt7_Mem_fnIM3MCUFv11ParseResultEEPS1_St12_PlaceholderILi1EEEE | |
| 3MCU | |
| send emergency_stop cmd | |
| emergency_stop | |
| -/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/mcu.cpp | |
| -mcu_name : %s | |
| -/lib/firmware/upgrade_sg.bin | |
| -ymodem_init %d | |
| -/lib/firmware/upgrade_extruder.bin | |
| -ymodem_transmit %d | |
| -ymodem_deint %d | |
| -ymodem failed. retry %d | |
| -wait Secondary mcu ready | |
| -connect_uart failed. retry %d | |
| -shutdown | |
| -is_shutdown | |
| -stats | |
| -MCU %s mcu_identify done | |
| -connect_uart failed. | |
| -connect_uart failed | |
| Timer too close | |
| This often indicates the host computer is overloaded. Check for other processes consuming excessive CPU time, high swap usage, disk errors, overheating, unstable voltage, or similar system problems on the host computer. | |
| Missed scheduling of next | |
| @@ -1548,6 +1564,14 @@ This generally occurs when the micro-controller has been requeste | |
| MCU_stepper too far in past | |
| Command request | |
| This generally occurs in response to an M112 G-Code command or in response to an internal error in the host software. | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/mcu.cpp | |
| +get_serialport_path %s | |
| +/dev/serial/by-id | |
| +Failed to open /dev/serial/by-id directory | |
| +Found device: %s | |
| +/dev/serial/by-id/ | |
| +Found matching device: %s | |
| +No matching module found | |
| debugoutput | |
| dictionary | |
| dictionary_ | |
| @@ -1571,6 +1595,7 @@ MCU %s | |
| canbus_uuid | |
| mem_interface | |
| serial | |
| +bootloader | |
| max_pending_blocks | |
| canbus_interface | |
| /dev/rpmsg_ | |
| @@ -1602,23 +1627,41 @@ free -h >> %s | |
| top -b -n 1 >> %s | |
| dmesg >> %s | |
| ' shutdown: | |
| +is_shutdown | |
| Previous MCU ' | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM7MCU_pwmFviEEvE | |
| +mcu_name : %s | |
| +/lib/firmware/upgrade_sg.bin | |
| +ymodem_init %d | |
| +/lib/firmware/upgrade_extruder.bin | |
| +ymodem_deint %d | |
| +ymodem failed. retry %d | |
| +wait Secondary mcu ready | |
| +connect_uart failed. retry %d | |
| +shutdown | |
| +stats | |
| +get_extruder_type | |
| +extruder_type_info | |
| +extruder_type_info: | |
| +MCU %s mcu_identify done | |
| +connect_uart failed. | |
| +connect_uart failed | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM15MCU_digital_outFviEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM10MCU_trsyncFv11ParseResultEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_endstopFviEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM7MCU_pwmFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7MCU_adcFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7MCU_adcFvR11ParseResultEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM10MCU_trsyncFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM10MCU_trsyncFvvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM10MCU_trsyncFv11ParseResultEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_endstopFviEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM7MCU_pwmFviEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM15MCU_digital_outFviEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM10MCU_trsyncFv11ParseResultEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11MCU_endstopFviEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM7MCU_pwmFviEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7MCU_adcFviEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7MCU_adcFvR11ParseResultEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM10MCU_trsyncFviEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM10MCU_trsyncFvvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM10MCU_trsyncFv11ParseResultEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11MCU_endstopFviEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM15MCU_digital_outFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7MCU_pwmFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7MCU_adcFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7MCU_adcFvR11ParseResultEEE | |
| @@ -1626,7 +1669,6 @@ St17_Weak_result_typeISt7_Mem_fnIM10MCU_trsyncFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM10MCU_trsyncFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM10MCU_trsyncFv11ParseResultEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11MCU_endstopFviEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM15MCU_digital_outFviEEE | |
| St5_BindIFSt7_Mem_fnIM10MCU_trsyncFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM10MCU_trsyncFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM10MCU_trsyncFv11ParseResultEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -1856,6 +1898,7 @@ add_hx711_sample oid=%c index=%c clk_pin=%u sdo_pin=%u | |
| calibration_sample oid=%c times_read=%hu | |
| sg_probe_check oid=%c x=%i y=%i z=%i cmd=%i | |
| extruder_bootup_info oid=%c crash_flag=%c rest_cause=%c R0=%u R1=%u R2=%u R3=%u R12=%u LR=%u PC=%u xPSR=%u | |
| +extruder_type_info info=%c | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/msgproto.cpp | |
| msgproto | |
| messages_format[%d] -> size : %d-%d | |
| @@ -2576,11 +2619,27 @@ BED_MESH_SET_INDEX TYPE=standard INDEX=0 | |
| BED_MESH_SET_INDEX TYPE=enhancement INDEX=0 | |
| stepper | |
| heater | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM13SelectReactorFvdEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM13SelectReactorFvdEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13SelectReactorFvdEEE | |
| +St5_BindIFSt7_Mem_fnIM13SelectReactorFvdEEPS1_St12_PlaceholderILi1EEEE | |
| St23_Sp_counted_ptr_inplaceI12ReactorTimerSaIS0_ELN9__gnu_cxx12_Lock_policyE2EE | |
| Timer callback cannot be null | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/reactor.cpp | |
| reactor | |
| +Timer is null | |
| +Checking null timer | |
| +Timer %s marked for deletion | |
| +Timer %s validity check: %d | |
| +Timer %s in pending delete queue | |
| +select error: %s | |
| +File handler callback error: %s | |
| Timer %s callback error: %s | |
| +async_callback | |
| +Async callback error: %s | |
| +Failed to create pipe for async callbacks | |
| +Cannot register null callback | |
| +Failed to notify reactor thread | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM18SerialRetryCommandFvR11ParseResultEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM18SerialRetryCommandFvR11ParseResultEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM18SerialRetryCommandFvR11ParseResultEEE | |
| @@ -2591,6 +2650,7 @@ clock pthread_join fail! | |
| serialhdl | |
| Error: No response from MCU %d pins_per_bank %d --- %s | |
| vector::_M_default_append | |
| +Error: No response from MCU %s %d --- %s | |
| identify offset= | |
| count= | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_stepperFviEEvE | |
| @@ -2606,18 +2666,20 @@ config_stepper oid= | |
| reset_step_clock oid= | |
| clock=0 | |
| stepper_get_position oid= | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFvvEEvE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/stepper.cpp | |
| +stepper_get_position error: %s | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFvbEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFddEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFvbEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFvbEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFvbEEE | |
| St5_BindIFSt7_Mem_fnIM8ToolHeadFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM8ToolHeadFvbEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM8ToolHeadFddEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -2665,27 +2727,27 @@ print_time | |
| stalls | |
| estimated_print_time | |
| position_e | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM8WebHooksFvP10WebRequestEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12ServerSocketFvvEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16ClientConnectionFvdEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11GCodeHelperFvP10WebRequestEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11GCodeHelperFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM8WebHooksFvP10WebRequestEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM17QueryStatusHelperFvP10WebRequestEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM12ServerSocketFvdEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12ServerSocketFvvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM16ClientConnectionFvdEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM8WebHooksFvP10WebRequestEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12ServerSocketFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16ClientConnectionFvdEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11GCodeHelperFvP10WebRequestEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11GCodeHelperFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM8WebHooksFvP10WebRequestEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM17QueryStatusHelperFvP10WebRequestEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM12ServerSocketFvdEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12ServerSocketFvvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM16ClientConnectionFvdEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM8WebHooksFvP10WebRequestEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11GCodeHelperFvP10WebRequestEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11GCodeHelperFvNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM17QueryStatusHelperFvP10WebRequestEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12ServerSocketFvdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12ServerSocketFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16ClientConnectionFvdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM8WebHooksFvP10WebRequestEEE | |
| St5_BindIFSt7_Mem_fnIM12ServerSocketFvdEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM12ServerSocketFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM16ClientConnectionFvdEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -2763,12 +2825,12 @@ step_clock would overflow: last=%llu, add=%llu | |
| Invalid step clock calculation: new=%llu, last=%llu, rel_sc=%f | |
| steppersync_flush sc_num:%d i:%d last_step_clock:%llx next_step_clock :%llx ret:%d | |
| trdispatch_alloc pthread_mutex_init | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM21BLTouchEndstopWrapperFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM21BLTouchEndstopWrapperFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM21BLTouchEndstopWrapperFvvEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM21BLTouchEndstopWrapperFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM21BLTouchEndstopWrapperFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM21BLTouchEndstopWrapperFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM21BLTouchEndstopWrapperFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM21BLTouchEndstopWrapperFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM21BLTouchEndstopWrapperFvvEEE | |
| 23ProbeEndstopWrapperBase | |
| St5_BindIFSt7_Mem_fnIM21BLTouchEndstopWrapperFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM21BLTouchEndstopWrapperFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -2802,12 +2864,12 @@ Store an output mode in the BLTouch EEPROM | |
| BLTOUCH_DEBUG | |
| BLTOUCH_STORE | |
| channel_ | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM14MCU_scaled_adcFvddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM16PrinterADCScaledFvddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM14MCU_scaled_adcFvddEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14MCU_scaled_adcFvddEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM16PrinterADCScaledFvddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM14MCU_scaled_adcFvddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14MCU_scaled_adcFvddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16PrinterADCScaledFvddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM14MCU_scaled_adcFvddEEE | |
| St5_BindIFSt7_Mem_fnIM14MCU_scaled_adcFvddEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM16PrinterADCScaledFvddEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| smooth_time | |
| @@ -2875,13 +2937,15 @@ BED_MESH | |
| ERROR | |
| G1 X202 F6000 | |
| G1 Y264.5 F6000 | |
| -G1 X173 F8000 | |
| -G1 X187 | |
| -G1 X173 | |
| +G1 X170 F8000 | |
| +G1 X190 | |
| +G1 X170 | |
| G1 Y262.5 F800 | |
| G1 X187 F8000 | |
| G1 Y250 | |
| G1 X202 | |
| +G1 Y264.5 F3000 | |
| +G1 Y264.5 | |
| G1 Y264.5 F1200 | |
| G1 Z5 F360 | |
| z_offset = %.3f | |
| @@ -2895,6 +2959,8 @@ M106 P1 S0 | |
| M106 P2 S0 | |
| M106 P3 S0 | |
| M109 S140 | |
| +Printer is shutdown | |
| +Printer is shutdown | |
| M8233 S%.3f P1 | |
| M190 S60 | |
| G29 BED_MESH_CALIBRATE fast | |
| @@ -2905,22 +2971,23 @@ G1 X10 Y10 F4500 | |
| unregister SDCP_MACHINE_STATUS_AUTO_LEVEL | |
| BED_MESH_CALIBRATE error | |
| SET_GCODE_OFFSET Z=0 MOVE=0 MOVE_SPEED=5.0 | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16BedMeshCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM7BedMeshFbSt6vectorIdSaIdEEdEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM7BedMeshFSt6vectorIdSaIdEEvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM16BedMeshCalibrateFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM5ZMeshFvSt6vectorIS2_IdSaIdEESaIS4_EEEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM5ZMeshFdiEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7BedMeshFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7BedMeshFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM7BedMeshFbSt6vectorIdSaIdEEdEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM7BedMeshFSt6vectorIdSaIdEEvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM16BedMeshCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16BedMeshCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM7BedMeshFbSt6vectorIdSaIdEEdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM7BedMeshFSt6vectorIdSaIdEEvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM16BedMeshCalibrateFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM5ZMeshFvSt6vectorIS2_IdSaIdEESaIS4_EEEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM5ZMeshFdiEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7BedMeshFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7BedMeshFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM7BedMeshFbSt6vectorIdSaIdEEdEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM7BedMeshFSt6vectorIdSaIdEEvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM16BedMeshCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16BedMeshCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16BedMeshCalibrateFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM5ZMeshFvSt6vectorIS2_IdSaIdEESaIS4_EEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM5ZMeshFdiEEE | |
| @@ -2928,7 +2995,6 @@ St17_Weak_result_typeISt7_Mem_fnIM7BedMeshFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7BedMeshFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7BedMeshFbSt6vectorIdSaIdEEdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7BedMeshFSt6vectorIdSaIdEEvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM16BedMeshCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| St5_BindIFSt7_Mem_fnIM7BedMeshFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM7BedMeshFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM7BedMeshFbSt6vectorIdSaIdEEdEEPS1_St12_PlaceholderILi1EES9_ILi2EEEE | |
| @@ -3079,21 +3145,21 @@ probe_speed | |
| probe_height | |
| Tool to help adjust bed leveling screws | |
| BED_SCREWS_ADJUST | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM7BedTiltFbRSt6vectorIdSaIdEEdEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16BedTiltCalibrateFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7BedTiltFvvEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM7BedTiltFbRSt6vectorIdSaIdEEdEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7BedTiltFSt6vectorIdSaIdEEvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM16BedTiltCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM16BedTiltCalibrateFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM7BedTiltFbRSt6vectorIdSaIdEEdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16BedTiltCalibrateFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7BedTiltFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM7BedTiltFbRSt6vectorIdSaIdEEdEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7BedTiltFSt6vectorIdSaIdEEvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM16BedTiltCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM16BedTiltCalibrateFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16BedTiltCalibrateFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM7BedTiltFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7BedTiltFbRSt6vectorIdSaIdEEdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7BedTiltFSt6vectorIdSaIdEEvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16BedTiltCalibrateFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM16BedTiltCalibrateFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM7BedTiltFvvEEE | |
| St5_BindIFSt7_Mem_fnIM7BedTiltFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM7BedTiltFbRSt6vectorIdSaIdEEdEEPS1_St12_PlaceholderILi1EESA_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM7BedTiltFSt6vectorIdSaIdEEvEEPS1_EE | |
| @@ -3106,12 +3172,12 @@ klippy:connect::BedTilt | |
| x_adjust: | |
| y_adjust: | |
| z_adjust: | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM9BreakSaveFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM9BreakSaveFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM9BreakSaveFvvEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM9BreakSaveFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM9BreakSaveFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM9BreakSaveFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM9BreakSaveFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM9BreakSaveFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM9BreakSaveFvvEEE | |
| St5_BindIFSt7_Mem_fnIM9BreakSaveFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM9BreakSaveFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| break_save_task | |
| @@ -3168,6 +3234,7 @@ m_limits_min_y | |
| m_limits_max_y | |
| m_limits_min_z | |
| m_limits_max_z | |
| +channel_id | |
| base_position_x_stop | |
| base_position_y_stop | |
| base_position_z_stop | |
| @@ -3181,6 +3248,7 @@ printer_fan_status | |
| model_helper_fan_status | |
| box_fan_status | |
| z_homing_stats | |
| +multicolor_stats | |
| BreakSave Write_File | |
| BreakSave Write_File m_need_write %d | |
| BreakSave Write_File path %s | |
| @@ -3196,15 +3264,15 @@ target_temp | |
| [%s] power outages interference signal detected. | |
| [%s] power outages detected. | |
| braek save finished | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM19MCU_bus_digital_outFviEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM7MCU_I2CFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7MCU_SPIFviEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM19MCU_bus_digital_outFviEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM7MCU_I2CFviEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM7MCU_I2CFviEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM19MCU_bus_digital_outFviEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7MCU_SPIFviEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM19MCU_bus_digital_outFviEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM7MCU_I2CFviEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM19MCU_bus_digital_outFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7MCU_SPIFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7MCU_I2CFviEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM19MCU_bus_digital_outFviEEE | |
| St5_BindIFSt7_Mem_fnIM7MCU_SPIFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM7MCU_I2CFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM19MCU_bus_digital_outFviEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -3248,21 +3316,21 @@ spi_software_sclk_pin | |
| spi_software_miso_pin | |
| spi_software_mosi_pin | |
| : spi pins must be on same mcu | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_buttonsFvR11ParseResultEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM13RotaryEncoderFvdbEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_buttonsFviEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_buttonsFvR11ParseResultEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM15MCU_ADC_buttonsFvddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM14PrinterButtonsFvdbSt8functionIFvdEEEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13RotaryEncoderFvdbEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11MCU_buttonsFvR11ParseResultEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM13RotaryEncoderFvdbEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11MCU_buttonsFviEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11MCU_buttonsFvR11ParseResultEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM15MCU_ADC_buttonsFvddEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM14PrinterButtonsFvdbSt8functionIFvdEEEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13RotaryEncoderFvdbEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13RotaryEncoderFvdbEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM11MCU_buttonsFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11MCU_buttonsFvR11ParseResultEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM15MCU_ADC_buttonsFvddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14PrinterButtonsFvdbSt8functionIFvdEEEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13RotaryEncoderFvdbEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM11MCU_buttonsFviEEE | |
| St5_BindIFSt7_Mem_fnIM11MCU_buttonsFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM11MCU_buttonsFvR11ParseResultEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM15MCU_ADC_buttonsFvddEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| @@ -3270,12 +3338,17 @@ St5_BindIFSt7_Mem_fnIM14PrinterButtonsFvdbSt8functionIFvdEEEEPS1_St12_Placeholde | |
| St5_BindIFSt7_Mem_fnIM13RotaryEncoderFvdbEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| config_buttons oid= | |
| button_count= | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/buttons.cpp | |
| +cmd: %s | |
| buttons_add oid= | |
| pos= | |
| buttons_query oid= | |
| +%llu | |
| retransmit_count= | |
| invert= | |
| ack_count | |
| +buttons_ack oid= | |
| +ack_count: %d | |
| button pins must be on same mcu | |
| unknown canbus_uuid | |
| Duplicate canbus_uuid | |
| @@ -3283,17 +3356,35 @@ St22_Maybe_get_result_typeISt7_Mem_fnIM14ChangeFilamentFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM14ChangeFilamentFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14ChangeFilamentFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM14ChangeFilamentFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +cmd_CUT_OFF_FILAMENT | |
| +cmd_MOVE_TO_EXTRUDE | |
| +*ZN14ChangeFilament20cmd_EXTRUDE_FILAMENTER12GCodeCommandEUliE_ | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/change_filament.cpp | |
| -check_move_ignore : %d | |
| -ChangeFilament busy : %d | |
| ChangeFilament status : %d | |
| +ChangeFilament busy : %d | |
| +check_move_ignore : %d | |
| +PRINT_START | |
| +plug_detect | |
| +M106 S%d | |
| +plug_filament_used | |
| +G1 E%d F%d | |
| +plug detect, retrying %d/3 | |
| +M729 | |
| +filament_wrap | |
| +cmd_EXTRUDE_FILAMENT fail | |
| +cmd_EXTRUDE_FILAMENT fail: pluged | |
| +cmd_ELEGOO_LOAD_FILAMENT_RETRY end | |
| +cmd_EXTRUDE_FILAMENT start | |
| FAN_ON | |
| REPORT | |
| -M106 S%d | |
| SET_MIN_EXTRUDE_TEMP S0 | |
| -G1 E%d F%d | |
| SET_MIN_EXTRUDE_TEMP RESET | |
| -M729 | |
| +switch_sensor filament_wrap_sensor | |
| +cmd_EXTRUDE_FILAMENT end | |
| +ZERO_Z | |
| +CUT_OFF_FILAMENT ZERO_Z=%d | |
| +EXTRUDE_FILAMENT E=-%d F=%d FAN_ON=0 | |
| +CHANGE_FILAMENT_SET_BUSY BUSY=0 | |
| extrude_fan_speed | |
| pos_x | |
| pos_y | |
| @@ -3309,25 +3400,60 @@ CUT_OFF_FILAMENT | |
| Cut off filament | |
| EXTRUDE_FILAMENT | |
| Extrude filament | |
| +ELEGOO_LOAD_FILAMENT | |
| +Load filament | |
| +ELEGOO_LOAD_FILAMENT_RETRY | |
| +Load filament retry | |
| +ELEGOO_LOAD_FILAMENT_REQUEST_SUCCESS | |
| +Load filament request success | |
| +ELEGOO_UNLOAD_FILAMENT | |
| +Unload filament | |
| m_min_x : | |
| m_max_x : | |
| m_min_y : | |
| m_max_y : | |
| Can't move to %f, %f | |
| -ZERO_Z | |
| +cmd_CUT_OFF_FILAMENT start | |
| +ZERO_NOZZLE | |
| +-------------%llf,%d | |
| M109 S | |
| Z_AXIS_OFF_LIMIT_ACTION | |
| +before cut cmd_CUT_OFF_FILAMENT cut check fail, cut sensor is not released | |
| +before cut cmd_CUT_OFF_FILAMENT cut sensor is disabled, check pass | |
| G1 Y30 F4500 | |
| G1 X255 F4500 | |
| +%s: start cut | |
| G1 Y3 F600 | |
| +%s: cut sensor is not nullptr, cut_sensor_state: %d, is_cut_off: %d | |
| +%s: cut sensor is nullptr | |
| +%s: cut success | |
| +after cut check cut sensor state: %d | |
| +after cut cmd_CUT_OFF_FILAMENT cut_sensor_state: %d | |
| +after cut cmd_CUT_OFF_FILAMENT, cut sensor is not released, cut fail | |
| +cut sensor is disabled!!!!!!!!!!!!!!!!! | |
| G1 X | |
| F4500 | |
| G1 Y | |
| +is_cut_off : %d | |
| +cmd_CUT_OFF_FILAMENT fail | |
| +Cut sensor:%d notify multi-color module | |
| +Cut sensor: multi-color module is nullptr | |
| +cmd_CUT_OFF_FILAMENT end | |
| +cmd_MOVE_TO_EXTRUDE start | |
| TARGET_TEMP | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13ControllerFanFvvEEvE | |
| +LIMIT_Z | |
| +cmd_MOVE_TO_EXTRUDE zero_z | |
| +cmd_MOVE_TO_EXTRUDE zero_z not | |
| +cmd_MOVE_TO_EXTRUDE move | |
| +%s: move to %f, %f | |
| +cmd_MOVE_TO_EXTRUDE end | |
| +cmd_ELEGOO_LOAD_FILAMENT zero_z | |
| +cmd_ELEGOO_LOAD_FILAMENT zero_z not | |
| +start_time: %llf | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13ControllerFanFddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13ControllerFanFvvEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM13ControllerFanFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13ControllerFanFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM13ControllerFanFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13ControllerFanFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13ControllerFanFvvEEE | |
| St5_BindIFSt7_Mem_fnIM13ControllerFanFvvEEPS1_EE | |
| @@ -3336,15 +3462,69 @@ controller_fan_timer | |
| klippy:ready:ControllerFan | |
| klippy:connect:ControllerFan | |
| extruder,heater_bed | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12DelayedGcodeFddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12DelayedGcodeFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM26CustomFilamentSwitchSensorFddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM26CustomFilamentSwitchSensorFvR12GCodeCommandEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM26CustomFilamentSwitchSensorFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM26CustomFilamentSwitchSensorFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM26CustomFilamentSwitchSensorFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM26CustomFilamentSwitchSensorFvR12GCodeCommandEEE | |
| +St5_BindIFSt7_Mem_fnIM26CustomFilamentSwitchSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +St5_BindIFSt7_Mem_fnIM26CustomFilamentSwitchSensorFddEEPS1_St12_PlaceholderILi1EEEE | |
| +26CustomFilamentSwitchSensor | |
| +*ZN26CustomFilamentSwitchSensorC4ENSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEUlbE_ | |
| +custom_filament_switch | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/custom_filament_switch_sensor.cpp | |
| +Custom Filament Sensor %s: insert event detected, Time %f | |
| +Custom Filament Sensor %s: runout event detected, Time %f | |
| +Custom Filament Sensor | |
| +: filament detected | |
| +: filament not detected | |
| +pause_on_runout | |
| +runout_detection_enabled | |
| +runout_gcode | |
| +insert_gcode | |
| +pause_delay | |
| +event_delay | |
| +QUERY_CUSTOM_FILAMENT_SENSOR | |
| +false | |
| +Custom Filament Sensor %s: hardware_enabled set to %s | |
| +Custom Filament Sensor %s: runout_detection_enabled set to %s | |
| +Query the status of the Custom Filament Sensor | |
| +Sets the custom filament sensor on/off | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM9CutSensorFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM9CutSensorFvvEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM9CutSensorFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM9CutSensorFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM9CutSensorFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM9CutSensorFvvEEE | |
| +St5_BindIFSt7_Mem_fnIM9CutSensorFvvEEPS1_EE | |
| +St5_BindIFSt7_Mem_fnIM9CutSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +set_five_way_sensor_state | |
| +9CutSensor | |
| +*ZN9CutSensorC4ENSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEUlbE_ | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/cut_sensor.cpp | |
| +Cut sensor %s: state: %d | |
| +Cut sensor %s: five_way_sensor_state:0x%02x | |
| +%s:0x%04x******************************************************** | |
| +Cut sensor %s: sensor is disabled | |
| +Cut sensor %s: state changed at time %f | |
| +Cut Sensor | |
| +: filament is cut | |
| +: filament is normal | |
| +klippy:ready:CutSensor | |
| +QUERY_CUT_SENSOR | |
| +Query the status of the Cut Sensor | |
| +Sets the cut sensor on/off | |
| +Cut sensor %s ready | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM12DelayedGcodeFvvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12DelayedGcodeFddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12DelayedGcodeFvR12GCodeCommandEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12DelayedGcodeFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12DelayedGcodeFddEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM12DelayedGcodeFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12DelayedGcodeFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12DelayedGcodeFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12DelayedGcodeFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12DelayedGcodeFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12DelayedGcodeFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM12DelayedGcodeFddEEE | |
| St5_BindIFSt7_Mem_fnIM12DelayedGcodeFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM12DelayedGcodeFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM12DelayedGcodeFddEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -3353,21 +3533,21 @@ DURATION | |
| initial_duration | |
| Update the duration of a delayed_gcode | |
| UPDATE_DELAYED_GCODE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM7DirZCtlFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7DirZCtlFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7DirZCtlFv11ParseResultEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7DirZCtlFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM7DirZCtlFbvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM7DirZCtlFvR12GCodeCommandEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM7DirZCtlFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7DirZCtlFviEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7DirZCtlFv11ParseResultEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7DirZCtlFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM7DirZCtlFbvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM7DirZCtlFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM7DirZCtlFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM7DirZCtlFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7DirZCtlFv11ParseResultEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7DirZCtlFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM7DirZCtlFbvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM7DirZCtlFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM7DirZCtlFviEEE | |
| St5_BindIFSt7_Mem_fnIM7DirZCtlFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM7DirZCtlFv11ParseResultEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM7DirZCtlFvvEEPS1_EE | |
| @@ -3398,18 +3578,18 @@ St17_Weak_result_typeISt7_Mem_fnIM13DisplayStatusFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM13DisplayStatusFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| M117 | |
| Printing | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM13ExcludeObjectFbSt6vectorIdSaIdEEdEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM13ExcludeObjectFSt6vectorIdSaIdEEvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13ExcludeObjectFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13ExcludeObjectFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13ExcludeObjectFSt6vectorIdSaIdEEvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13ExcludeObjectFbSt6vectorIdSaIdEEdEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM13ExcludeObjectFbSt6vectorIdSaIdEEdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM13ExcludeObjectFSt6vectorIdSaIdEEvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13ExcludeObjectFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13ExcludeObjectFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13ExcludeObjectFSt6vectorIdSaIdEEvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13ExcludeObjectFbSt6vectorIdSaIdEEdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13ExcludeObjectFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13ExcludeObjectFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13ExcludeObjectFbSt6vectorIdSaIdEEdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13ExcludeObjectFSt6vectorIdSaIdEEvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13ExcludeObjectFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13ExcludeObjectFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM13ExcludeObjectFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM13ExcludeObjectFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM13ExcludeObjectFbSt6vectorIdSaIdEEdEEPS1_St12_PlaceholderILi1EES9_ILi2EEEE | |
| @@ -3428,21 +3608,21 @@ EXCLUDE_OBJECT_START | |
| EXCLUDE_OBJECT_END | |
| EXCLUDE_OBJECT | |
| EXCLUDE_OBJECT_DEFINE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM3FanFvdEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM3FanFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM3FanFddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM3FanFvdEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM3FanFvddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM10PrinterFanFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM3FanFviEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM3FanFvdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM3FanFviEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM3FanFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM3FanFvdEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM3FanFvddEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM10PrinterFanFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM3FanFviEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM3FanFviEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM3FanFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM3FanFvdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM3FanFvddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM10PrinterFanFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM3FanFviEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM3FanFddEEE | |
| St5_BindIFSt7_Mem_fnIM3FanFddEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM3FanFvdEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM3FanFvddEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| @@ -3452,6 +3632,8 @@ St5_BindIFSt7_Mem_fnIM3FanFviEEPS1_St12_PlaceholderILi1EEEE | |
| error_fan oid is %d, time is %1.lf | |
| board_cooling_fan | |
| hotend_cooling_fan | |
| +FAN_STATE_HOTEND_COOLING_FAN_ERROR | |
| +Z-axis zeroing failed | |
| Fan %s is not working | |
| tachometer_pin | |
| tachometer_ppr | |
| @@ -3461,86 +3643,146 @@ box_fan | |
| max_power | |
| kick_start_time | |
| off_below | |
| -hardware_pwm | |
| shutdown_speed | |
| startup_voltage | |
| fan_check_timer | |
| gcode:request_restart:Fan | |
| +hardware_pwm | |
| +cycle_time:%f | |
| SET_FAN_SPEED | |
| silence | |
| normal | |
| crazy | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM17PrinterFanGenericFvR12GCodeCommandEEvE | |
| +model_helper_fan--> | |
| +box_fan_temp_trigger | |
| +box_fan_pwm1 | |
| +box_fan_pwm2 | |
| +box_fan_pwm_1-> | |
| +box_fan_pwm_2-> | |
| +box_temp_trigger_value-> | |
| +:%.2f | |
| +box_temp_trigger_value---->:%.2f | |
| +box_fan_pwm---->:%d | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14FanCoverSensorFddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14FanCoverSensorFvR12GCodeCommandEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14FanCoverSensorFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14FanCoverSensorFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM14FanCoverSensorFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM14FanCoverSensorFvR12GCodeCommandEEE | |
| +St5_BindIFSt7_Mem_fnIM14FanCoverSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +St5_BindIFSt7_Mem_fnIM14FanCoverSensorFddEEPS1_St12_PlaceholderILi1EEEE | |
| +14FanCoverSensor | |
| +*ZN14FanCoverSensorC4ENSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEUlbE_ | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/fan_cover_sensor.cpp | |
| +FanCoverSensor '%s' Event: hardware_enabled=%d, status.enabled=%d, new_state=%d | |
| +FanCoverSensor::register_state_change_callback state: %d, eventtime: %f, m_min_event_systime: %f, status.enabled: %d | |
| +m_remove_count: %d | |
| +Fan Cover Sensor %s: cover removed event detected, Time %f | |
| +Fan Cover Sensor %s: cover removed, remove count %d | |
| +fan_cover | |
| +Fan Cover Sensor %s: cover installed event detected, Time %f | |
| +fan cover sensor is unavailable! | |
| +Fan Cover Sensor | |
| +: cover installed | |
| +: cover removed | |
| +pause_on_removal | |
| +gcode_macro | |
| +cover_removed_gcode | |
| +cover_installed_gcode | |
| +QUERY_FAN_COVER_SENSOR | |
| +SET_FAN_COVER_SENSOR | |
| +FanCoverSensor::cover_removed_event_handler | |
| +PAUSE MOVE=0 | |
| +fan_cover_get_position: %f %f %f | |
| +G1 Z10 F600 | |
| +Query the status of the Fan Cover Sensor | |
| +Sets the fan cover sensor on/off | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM17PrinterFanGenericFddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM17PrinterFanGenericFvR12GCodeCommandEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM17PrinterFanGenericFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM17PrinterFanGenericFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM17PrinterFanGenericFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM17PrinterFanGenericFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM17PrinterFanGenericFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM17PrinterFanGenericFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM17PrinterFanGenericFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM17PrinterFanGenericFddEEPS1_St12_PlaceholderILi1EEEE | |
| Sets the speed of a fan | |
| genericfan_check_timer | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13EncoderSensorFvdEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13EncoderSensorFddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12RunoutHelperF23RunoutHelper_status_tagvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13EncoderSensorFvvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13EncoderSensorFvdEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13EncoderSensorFddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12RunoutHelperF23RunoutHelper_status_tagvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM3MCUFddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13EncoderSensorFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13EncoderSensorFvdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13EncoderSensorFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12RunoutHelperF23RunoutHelper_status_tagvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM3MCUFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13EncoderSensorFvvEEE | |
| -St5_BindIFSt7_Mem_fnIM13EncoderSensorFvvEEPS1_EE | |
| -St5_BindIFSt7_Mem_fnIM13EncoderSensorFvdEEPS1_St12_PlaceholderILi1EEEE | |
| -St5_BindIFSt7_Mem_fnIM13EncoderSensorFddEEPS1_St12_PlaceholderILi1EEEE | |
| -St5_BindIFSt7_Mem_fnIM12RunoutHelperF23RunoutHelper_status_tagvEEPS1_EE | |
| -St5_BindIFSt7_Mem_fnIM3MCUFddEEPS1_St12_PlaceholderILi1EEEE | |
| -extruder_pos_update_timer | |
| -switch_pin | |
| -detection_length | |
| -klippy:ready:EncoderSensor | |
| -idle_timeout:printing:EncoderSensor | |
| -idle_timeout:ready:EncoderSensor | |
| -idle_timeout:idle:EncoderSensor | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12RunoutHelperFvvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12RunoutHelperFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12RunoutHelperFddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12SwitchSensorFvdbEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12RunoutHelperFvvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12RunoutHelperFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12RunoutHelperFddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12SwitchSensorFvdbEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12RunoutHelperFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12RunoutHelperFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12SwitchSensorFvdbEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12RunoutHelperFvvEEE | |
| -St5_BindIFSt7_Mem_fnIM12RunoutHelperFvvEEPS1_EE | |
| -St5_BindIFSt7_Mem_fnIM12RunoutHelperFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| -St5_BindIFSt7_Mem_fnIM12RunoutHelperFddEEPS1_St12_PlaceholderILi1EEEE | |
| -St5_BindIFSt7_Mem_fnIM12SwitchSensorFvdbEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM20FilamentSwitchSensorFvbEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM20FilamentSwitchSensorFvR12GCodeCommandEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM20FilamentSwitchSensorFvbEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM20FilamentSwitchSensorFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM20FilamentSwitchSensorFvbEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM20FilamentSwitchSensorFvR12GCodeCommandEEE | |
| +St5_BindIFSt7_Mem_fnIM20FilamentSwitchSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +St5_BindIFSt7_Mem_fnIM20FilamentSwitchSensorFvbEEPS1_St12_PlaceholderILi1EEEE | |
| +set_five_way_sensor_state | |
| +20FilamentSwitchSensor | |
| +filament_switch | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/filament_switch_sensor.cpp | |
| +Filament Sensor %s: status checked at time %f, filament_detected: %d, enabled: %d | |
| Filament Sensor | |
| -: filament detected | |
| -: filament not detected | |
| -PAUSE | |
| -pause_on_runout | |
| -gcode_macro | |
| -runout_gcode | |
| -insert_gcode | |
| -pause_delay | |
| -event_delay | |
| -klippy:ready:RunoutHelper | |
| +Filament Sensor %s: five_way_sensor_state:0x%02x %d 0x%02x | |
| +Filament Sensor %s: runout event detected, but is checking, return | |
| +Filament Sensor %s: set_checking to %s | |
| +Filament Sensor %s: insert event detected, Time %f | |
| +runout event detected, auto refill filament | |
| +runout event detected, do nothing.............. | |
| +multi color module is not initialized, don't need to auto refill filament | |
| QUERY_FILAMENT_SENSOR | |
| -SENSOR | |
| -SET_FILAMENT_SENSOR | |
| -: insert event detected, Time | |
| -: runout event detected, Time | |
| +Filament Sensor %s: hardware_enabled set to %s | |
| +Filament Sensor %s: runout_detection_enabled set to %s | |
| Query the status of the Filament Sensor | |
| Sets the filament sensor on/off | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM18FilamentWrapSensorFvbEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM18FilamentWrapSensorFddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM18FilamentWrapSensorFvvEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM18FilamentWrapSensorFvR12GCodeCommandEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM18FilamentWrapSensorFvbEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM18FilamentWrapSensorFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM18FilamentWrapSensorFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM18FilamentWrapSensorFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM18FilamentWrapSensorFvbEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM18FilamentWrapSensorFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM18FilamentWrapSensorFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM18FilamentWrapSensorFvR12GCodeCommandEEE | |
| +St5_BindIFSt7_Mem_fnIM18FilamentWrapSensorFvvEEPS1_EE | |
| +St5_BindIFSt7_Mem_fnIM18FilamentWrapSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +St5_BindIFSt7_Mem_fnIM18FilamentWrapSensorFvbEEPS1_St12_PlaceholderILi1EEEE | |
| +St5_BindIFSt7_Mem_fnIM18FilamentWrapSensorFddEEPS1_St12_PlaceholderILi1EEEE | |
| +cmd_CHECK_FILAMENT_WRAP | |
| +set_five_way_sensor_state | |
| +winding_trigger_event_handler | |
| +18FilamentWrapSensor | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/filament_wrap_sensor.cpp | |
| +%s -------------------------- | |
| +extrude_length: %d | |
| +G1 E2 F523 | |
| +G1 E-20 F523 | |
| +extrude_length: %d success and break!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +extrude success!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +extrude failed, still wrapped!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +klippy:ready:FilamentWrapSensor | |
| +SET_WRAP_SENSOR | |
| +CHECK_FILAMENT_WRAP | |
| +Filament wrap sensor %s: state changed at time %f | |
| +Filament Wrap Sensor | |
| +: filament is wrapped | |
| +: filament is flowing normally | |
| +Filament Sensor %s: filament_wrap_sensor state: %d | |
| +Filament Sensor %s: five_way_sensor_state:0x%02x | |
| +Filament Sensor %s: filament_wrap_sensor is on | |
| +five way jam!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +Filament Sensor %s: is_printing: %d, multi_color_state: %d | |
| +Filament Sensor: is_printing and multi_color_state is idle, trigger winding_trigger_event_handler!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +Filament Sensor: multi-color module is not idle, trigger multi-color wrapping resume!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +WRAPPING_RESUME | |
| +Filament wrap sensor %s: filament is flowing normally at time %f | |
| +FilamentWrapSensor_status::winding_trigger_event_handler-------------------------- | |
| +%s is checking, return never!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +G1 X202 F3000 | |
| +Query the status of the Filament Wrap Sensor | |
| +Sets the filament wrap sensor on/off | |
| +Filament wrap sensor %s ready | |
| hft_hz | |
| lft_k1 | |
| lft_k1_oft | |
| @@ -3589,12 +3831,12 @@ resolution | |
| G2/G3 does not support relative move mode | |
| G2/G3 does not support R moves | |
| G2/G3 requires IJ, IK or JK parameters | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11GCodeButtonFvdbEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11GCodeButtonFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11GCodeButtonFvdbEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11GCodeButtonFvdbEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11GCodeButtonFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM11GCodeButtonFvdbEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11GCodeButtonFvdbEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11GCodeButtonFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM11GCodeButtonFvdbEEE | |
| St5_BindIFSt7_Mem_fnIM11GCodeButtonFvdbEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM11GCodeButtonFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| PRESSED | |
| @@ -3604,21 +3846,21 @@ analog_pullup_resistor | |
| QUERY_BUTTON | |
| BUTTON | |
| Report on the state of a button | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFSt6vectorIdSaIdEEvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM9GCodeMoveFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM9GCodeMoveFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM9GCodeMoveFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFbRSt6vectorIdSaIdEEdEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM8ToolHeadFSt6vectorIdSaIdEEvEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFSt6vectorIdSaIdEEvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM9GCodeMoveFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM9GCodeMoveFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM9GCodeMoveFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFbRSt6vectorIdSaIdEEdEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM8ToolHeadFSt6vectorIdSaIdEEvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFSt6vectorIdSaIdEEvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM9GCodeMoveFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM9GCodeMoveFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM9GCodeMoveFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFbRSt6vectorIdSaIdEEdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM8ToolHeadFSt6vectorIdSaIdEEvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM9GCodeMoveFvvEEE | |
| St5_BindIFSt7_Mem_fnIM9GCodeMoveFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM9GCodeMoveFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEPS1_St12_PlaceholderILi1EESD_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM9GCodeMoveFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -3643,69 +3885,29 @@ cmd_ | |
| _help | |
| GET_POSITION | |
| MANUAL_MOVE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/gcode_move.cpp | |
| +save gcode state: %s | |
| +absolute_coord: %d | |
| +absolute_extrude: %d | |
| +base_position: %f, %f, %f, %f | |
| +homing_position: %f, %f, %f, %f | |
| +speed: %f | |
| +speed_factor: %f | |
| +extrude_factor: %f | |
| +last_position: %f, %f, %f, %f | |
| Set a virtual offset to g-code positions | |
| Save G-Code coordinate state | |
| Restore a previously saved G-Code state | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFvvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFvddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM23HallFilamentWidthSensorFvvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM23HallFilamentWidthSensorFvddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM23HallFilamentWidthSensorFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM23HallFilamentWidthSensorFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFvddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM23HallFilamentWidthSensorFvR12GCodeCommandEEE | |
| -St5_BindIFSt7_Mem_fnIM23HallFilamentWidthSensorFvvEEPS1_EE | |
| -St5_BindIFSt7_Mem_fnIM23HallFilamentWidthSensorFvddEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| -St5_BindIFSt7_Mem_fnIM23HallFilamentWidthSensorFddEEPS1_St12_PlaceholderILi1EEEE | |
| -St5_BindIFSt7_Mem_fnIM23HallFilamentWidthSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| -Filament width logging Turned Off | |
| -Filament width logging Turned On | |
| -Filament dia (measured mm): | |
| -Filament NOT present | |
| -ADC1= | |
| - ADC2= | |
| - RAW= | |
| -Filament width sensor Turned On | |
| -Filament width sensor is already On | |
| -Cal_dia1 | |
| -Cal_dia2 | |
| -Raw_dia1 | |
| -Raw_dia2 | |
| -measurement_delay | |
| -default_nominal_filament_diameter | |
| -max_difference | |
| -min_diameter | |
| -logging | |
| -use_current_dia_while_delay | |
| -klippy:ready:HallFilamentWidthSensor | |
| -extrude_factor_update_timer | |
| -QUERY_FILAMENT_WIDTH | |
| -RESET_FILAMENT_WIDTH_SENSOR | |
| -DISABLE_FILAMENT_WIDTH_SENSOR | |
| -ENABLE_FILAMENT_WIDTH_SENSOR | |
| -QUERY_RAW_FILAMENT_WIDTH | |
| -ENABLE_FILAMENT_WIDTH_LOG | |
| -DISABLE_FILAMENT_WIDTH_LOG | |
| -Filament width measurements cleared! | |
| -M221 S100 | |
| -Filament width sensor Turned Off | |
| -Filament width sensor is already Off | |
| -Filament width: | |
| -M221 S | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM16PrinterHeaterBedFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM16PrinterHeaterBedFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16PrinterHeaterBedFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM16PrinterHeaterBedFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| cmd_M190 | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/heater_bed.cpp | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM16PrinterHeaterFanFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM16PrinterHeaterFanFddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM16PrinterHeaterFanFvvEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16PrinterHeaterFanFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM16PrinterHeaterFanFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16PrinterHeaterFanFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16PrinterHeaterFanFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16PrinterHeaterFanFvvEEE | |
| St5_BindIFSt7_Mem_fnIM16PrinterHeaterFanFvvEEPS1_EE | |
| @@ -3713,18 +3915,18 @@ St5_BindIFSt7_Mem_fnIM16PrinterHeaterFanFddEEPS1_St12_PlaceholderILi1EEEE | |
| klippy:ready:PrinterHeaterFan | |
| can not find heater | |
| heater_fan_timer | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM6HeaterFvddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14PrinterHeatersFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM14PrinterHeatersFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM6HeaterFvddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM6HeaterFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM14PrinterHeatersFvvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM6HeaterFvddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14PrinterHeatersFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM14PrinterHeatersFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM6HeaterFvddEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM6HeaterFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM14PrinterHeatersFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM6HeaterFvddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM6HeaterFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14PrinterHeatersFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14PrinterHeatersFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM6HeaterFvddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM6HeaterFvR12GCodeCommandEEE | |
| 7Control | |
| St5_BindIFSt7_Mem_fnIM6HeaterFvddEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM6HeaterFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -3755,8 +3957,10 @@ Turn off all heaters | |
| Wait for a temperature on a sensor | |
| TURN_OFF_HEATERS | |
| TEMPERATURE_WAIT | |
| +M301 | |
| M130 | |
| M131 | |
| +M132 | |
| thermistor | |
| adc_temperature | |
| spi_temperature | |
| @@ -3784,6 +3988,7 @@ Photoelectric home.... | |
| strain gauge home.... | |
| homing:homing_move_begin | |
| Failed to home did_trigger:%d check_triggered:%d is_succ:%d | |
| +Failed to home | |
| homing:homing_move_end | |
| homing:home_rails_begin | |
| forcepos: %f %f %f %f | |
| @@ -3791,8 +3996,8 @@ movepos: %f %f %f %f | |
| SET_TMC_CURRENT_ | |
| CURRENT= | |
| homing:home_rails_end | |
| -Z-axis zeroing failed | |
| Z-axis zeroing failed mcu shutdown | |
| +Failed to home | |
| hl_tpool_create_thread(&wait_z_home_thread, wait_z_home_process, NULL, 0, 0, 0, 0) == 0 | |
| enable timestamp compensation!!!!!!! ori-z:%f compensation-z:%f delta_compensation_z:%f | |
| disable timestamp compensation!!!!!!! ori-z:%f compensation-z:%f delta_compensation_z:%f | |
| @@ -3802,15 +4007,15 @@ homing_z_move move_z:%f | |
| g29 movepos: | |
| M106 S%.0f | |
| Probe triggered prior to movement | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11HX711SampleFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11HX711SampleFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11HX711SampleFviEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11HX711SampleFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11HX711SampleFvvEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11HX711SampleFvvEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11HX711SampleFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11HX711SampleFviEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM11HX711SampleFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11HX711SampleFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11HX711SampleFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11HX711SampleFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11HX711SampleFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM11HX711SampleFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM11HX711SampleFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM11HX711SampleFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM11HX711SampleFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -3834,18 +4039,18 @@ use_mcu | |
| klippy:disconnect | |
| Read hx711s vals | |
| CALIBRATION_HX711_SAMPLE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM6HX711SFvvEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM6HX711SFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM6HX711SFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM6HX711SFvR11ParseResultEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM6HX711SFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM6HX711SFvvEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM6HX711SFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM6HX711SFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM6HX711SFviEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM6HX711SFvR11ParseResultEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM6HX711SFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM6HX711SFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM6HX711SFviEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM6HX711SFvR11ParseResultEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM6HX711SFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM6HX711SFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM6HX711SFviEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM6HX711SFvR11ParseResultEEE | |
| St5_BindIFSt7_Mem_fnIM6HX711SFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM6HX711SFvR11ParseResultEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM6HX711SFvvEEPS1_EE | |
| @@ -3912,18 +4117,18 @@ read_base cnt: | |
| read_base wait data | |
| z-Touch::read_base: Can not read z-Touch data. | |
| read_base result: | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11IdleTimeoutFddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11IdleTimeoutFvdddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11IdleTimeoutFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11IdleTimeoutFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11IdleTimeoutFvdddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11IdleTimeoutFddEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11IdleTimeoutFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11IdleTimeoutFvdddEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11IdleTimeoutFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11IdleTimeoutFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11IdleTimeoutFvdddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11IdleTimeoutFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM11IdleTimeoutFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM11IdleTimeoutFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11IdleTimeoutFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11IdleTimeoutFvdddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM11IdleTimeoutFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM11IdleTimeoutFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM11IdleTimeoutFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM11IdleTimeoutFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM11IdleTimeoutFddEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -3944,12 +4149,12 @@ Set the idle timeout in seconds | |
| update idle timer help | |
| SET_IDLE_TIMEOUT | |
| UPDATE_IDLE_TIMER | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11InputShaperFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11InputShaperFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11InputShaperFvvEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11InputShaperFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11InputShaperFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM11InputShaperFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11InputShaperFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11InputShaperFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM11InputShaperFvvEEE | |
| St5_BindIFSt7_Mem_fnIM11InputShaperFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM11InputShaperFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| DAMPING_RATIO_X | |
| @@ -3967,12 +4172,12 @@ damping_ratio_y | |
| shaper_type | |
| Set cartesian parameters for input shaper | |
| SET_INPUT_SHAPER | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM9LEDHelperFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13PrinterPWMLEDFvSt6vectorI7color_tSaIS3_EEdEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM9LEDHelperFvR12GCodeCommandEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM9LEDHelperFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13PrinterPWMLEDFvSt6vectorI7color_tSaIS3_EEdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM9LEDHelperFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM9LEDHelperFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13PrinterPWMLEDFvSt6vectorI7color_tSaIS3_EEdEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM9LEDHelperFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM9LEDHelperFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM13PrinterPWMLEDFvSt6vectorI7color_tSaIS3_EEdEEPS1_St12_PlaceholderILi1EESA_ILi2EEEE | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/led.cpp | |
| @@ -3989,15 +4194,15 @@ SET_LED | |
| green | |
| white | |
| No pins configured for LED %s | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM17ManualProbeHelperFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11ManualProbeFvSt6vectorIdSaIdEEEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11ManualProbeFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM17ManualProbeHelperFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11ManualProbeFvSt6vectorIdSaIdEEEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11ManualProbeFvSt6vectorIdSaIdEEEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM17ManualProbeHelperFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11ManualProbeFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM17ManualProbeHelperFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11ManualProbeFvSt6vectorIdSaIdEEEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM17ManualProbeHelperFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11ManualProbeFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11ManualProbeFvSt6vectorIdSaIdEEEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM17ManualProbeHelperFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM11ManualProbeFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM11ManualProbeFvSt6vectorIdSaIdEEEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM17ManualProbeHelperFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -4019,15 +4224,15 @@ MANUAL_STEPPER | |
| No endstop for this manual stepper | |
| SET_POSITION | |
| STOP_ON_ENDSTOP | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM19PrinterMotionReportFvvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFdyEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11DumpStepperF12API_data_tagvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM19PrinterMotionReportFvvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM3MCUFdyEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM3MCUFdyEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM19PrinterMotionReportFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11DumpStepperF12API_data_tagvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM19PrinterMotionReportFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM3MCUFdyEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM19PrinterMotionReportFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11DumpStepperF12API_data_tagvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM3MCUFdyEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM19PrinterMotionReportFvvEEE | |
| St5_BindIFSt7_Mem_fnIM11DumpStepperF12API_data_tagvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM3MCUFdyEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM19PrinterMotionReportFvvEEPS1_EE | |
| @@ -4035,15 +4240,15 @@ Dumping stepper ' | |
| queue_step: | |
| queue_step | |
| : t= | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM8NeoPixelFvvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM8NeoPixelFviEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM8NeoPixelFvSt6vectorI7color_tSaIS3_EEdEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM8NeoPixelFvvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM8NeoPixelFviEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM8NeoPixelFviEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM8NeoPixelFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM8NeoPixelFvSt6vectorI7color_tSaIS3_EEdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM8NeoPixelFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM8NeoPixelFviEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM8NeoPixelFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM8NeoPixelFvSt6vectorI7color_tSaIS3_EEdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM8NeoPixelFviEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM8NeoPixelFvvEEE | |
| St5_BindIFSt7_Mem_fnIM8NeoPixelFvSt6vectorI7color_tSaIS3_EEdEEPS1_St12_PlaceholderILi1EESA_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM8NeoPixelFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM8NeoPixelFvvEEPS1_EE | |
| @@ -4065,12 +4270,12 @@ St22_Weak_result_type_implISt7_Mem_fnIM3NetFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM3NetFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM3NetFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| 0.0.0.0 | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM8Palette2FvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM8Palette2FddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM8Palette2FvR12GCodeCommandEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM8Palette2FvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM8Palette2FddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM8Palette2FvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM8Palette2FvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM8Palette2FddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM8Palette2FvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM8Palette2FvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM8Palette2FddEEPS1_St12_PlaceholderILi1EEEE | |
| 9.0.9 | |
| @@ -4078,7 +4283,6 @@ CANCEL_PRINT | |
| M220 S | |
| SDCARD_PRINT_FILE FILENAME= | |
| CLEAR_PAUSE | |
| -false | |
| Connection Okay | |
| smart_load_timer | |
| Cannot auto load when the Palette 2 is not ready | |
| @@ -4111,19 +4315,23 @@ auto_load_speed | |
| auto_cancel_variation | |
| Initialize the print, and check connection with the Palette 2 | |
| Reset print information | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11PauseResumeFddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11PauseResumeFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11PauseResumeFddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11PauseResumeFvvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11PauseResumeFddEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11PauseResumeFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11PauseResumeFddEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11PauseResumeFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM11PauseResumeFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11PauseResumeFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11PauseResumeFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM11PauseResumeFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM11PauseResumeFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM11PauseResumeFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM11PauseResumeFddEEPS1_St12_PlaceholderILi1EEEE | |
| +cmd_RESUME | |
| action:paused | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/pause_resume.cpp | |
| +do_resume | |
| +action:resumed | |
| action:resumed | |
| recover_velocity | |
| klippy:connect:PauseResume | |
| @@ -4135,6 +4343,8 @@ M603 | |
| STOP_RESUME | |
| STOP_PRINT | |
| M600 | |
| +M600_DISABLE | |
| +M600_ENABLE | |
| pause_abs_pos_x | |
| pause_abs_pos_y | |
| pause_rel_pos_z | |
| @@ -4145,7 +4355,22 @@ pause_extruder_temp | |
| pause_fan_timeout | |
| pause_fan_speed | |
| resume_extrude_fan_speed | |
| +action:cancel | |
| +G0 Z10 F600 | |
| +M204 S5000 | |
| +G1 X202 F20000 | |
| +G1 Y250 F20000 | |
| +M204 S | |
| +pause because of M600 | |
| +M600 is disabled | |
| +EXTRUDE_FILAMENT E=-60 F=240 FAN_ON=0 REPORT=0 | |
| Print is not paused, resume aborted | |
| +%s Print is not paused, resume aborted | |
| +MULTICOLOR_RESUME-------------------------------------------------- | |
| +MULTICOLOR_RESUME | |
| +MULTICOLOR_RESUME ERROR-------------------------------------------------- | |
| +MULTICOLOR_RESUME SUCCESS, continue execute E100 resume-------------------------------------------------- | |
| +not multi_color paused, continue execute E100 resume | |
| RESTORE_GCODE_STATE STATE=PAUSE_STATE MOVE=1 MOVE_SPEED= | |
| M190 S | |
| G1 E13 F523 | |
| @@ -4154,12 +4379,11 @@ G4 S4 | |
| M204 S15000 | |
| M106 S | |
| -------------------------cmd_RESUME end-------------------------- | |
| -/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/pause_resume.cpp | |
| -pause because of M600 | |
| -EXTRUDE_FILAMENT E=-60 F=240 FAN_ON=0 REPORT=0 | |
| -action:cancel | |
| +custom_filament_switch_state reset to IDLE | |
| +srv_control | |
| /board-resource/break_save0.gcode | |
| G1 Z%f F360 | |
| +MULTICOLOR_BREAK_RESUME CHANNEL_ID= | |
| G0 X | |
| F12000 | |
| save_z_stop | |
| @@ -4170,8 +4394,8 @@ G1 Z-10 F360 | |
| m_safe_z_homing no res | |
| G92 E | |
| G1 F | |
| -G0 Z10 F600 | |
| Print already paused | |
| +MOVE | |
| SAVE_GCODE_STATE STATE=PAUSE_STATE | |
| G1 E-2 F1800 | |
| G1 Z | |
| @@ -4197,17 +4421,63 @@ PID_CALIBRATE_ALL | |
| PID_CALIBRATE_HOTBED | |
| PID_CALIBRATE_NOZZLE | |
| WRITE_FILE | |
| +pid_calibrate interrupted | |
| Autotune: final: Kp= | |
| Ki= | |
| Kd= | |
| -pid_calibrate interrupted | |
| Log and report results | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/pid_calibrate.cpp | |
| G28 failed | |
| - F1800 | |
| PID_CALIBRATE HEATER=extruder TARGET= | |
| PID_CALIBRATE HEATER=heater_bed TARGET= | |
| M109 S100 | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16PlugDetectSensorFvvEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16PlugDetectSensorFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16PlugDetectSensorFddEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16PlugDetectSensorFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16PlugDetectSensorFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16PlugDetectSensorFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16PlugDetectSensorFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16PlugDetectSensorFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16PlugDetectSensorFddEEE | |
| +St5_BindIFSt7_Mem_fnIM16PlugDetectSensorFvvEEPS1_EE | |
| +St5_BindIFSt7_Mem_fnIM16PlugDetectSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +St5_BindIFSt7_Mem_fnIM16PlugDetectSensorFddEEPS1_St12_PlaceholderILi1EEEE | |
| +16PlugDetectSensor | |
| +*ZN16PlugDetectSensorC4ENSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEEUlbE_ | |
| +PLUGGED | |
| +RESUMING | |
| +PAUSED | |
| +Plug Detect Sensor %s: Enabled=%s, Physically_Plugged=%s, State=%s, Retries=%d, FilamentExtrudedSinceLastTrigger=%.2f | |
| +max_retries | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/plug_detect_sensor.cpp | |
| +Plug sensor %s state changing from %d to %d | |
| +klippy:ready:PlugDetectSensor | |
| +QUERY_PLUG_SENSOR | |
| +SET_PLUG_SENSOR | |
| +RESET_PLUG_SENSOR | |
| +RESET_PLUG_SENSOR_BASELINE | |
| +ATTEMPT_UNCLOG | |
| +Plug sensor %s: Baseline reset command received. | |
| +Plug sensor %s: Reset command received. | |
| +Plug sensor state has been reset to IDLE. | |
| +Plug sensor %s: Starting unclog cycle %d/%d... | |
| +G1 E-20 F2100 | |
| +G1 E2 F1500 | |
| +Plug sensor %s: Sensor triggered during purge. Unclog successful. | |
| +Plug sensor %s: Unclog cycle %d failed. | |
| +Plug sensor %s: Automatic unclog successful. Resuming print. | |
| +Plug sensor %s: All %d unclog attempts failed. Printer remains paused for user intervention. | |
| +Plug detected! Scheduling pause and unclog attempt... | |
| +ATTEMPT_UNCLOG SENSOR= | |
| +Plug sensor %s: Print has resumed. Returning to IDLE state. | |
| +Query the status of the Plug Detect Sensor | |
| +Sets the plug detect sensor on/off | |
| +Resets the plug sensor state after a clog event | |
| +Resets the plug sensor baseline | |
| +Internal command to attempt to fix a filament clog. | |
| +plug_detect_timer | |
| +Plug detect sensor %s ready, max_retries = %d | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM10PrintStatsFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM10PrintStatsFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM10PrintStatsFvR12GCodeCommandEEE | |
| @@ -4218,10 +4488,12 @@ note_pauseing | |
| note_pause | |
| note_canceling | |
| note_resuming | |
| +note_resumed | |
| _note_finish | |
| CURRENT_LAYER | |
| LAST_PRINT_TIME | |
| TOTAL_LAYERS | |
| +print_layer | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/print_stats.cpp | |
| print_stats | |
| >>>>>> current layer changed :: %d,report status | |
| @@ -4237,24 +4509,25 @@ can't access thumbnail_path_tmp : %s | |
| >>>>>> m_print_stats.state : PRINT_STATS_STATE_PAUSED (%s) | |
| >>>>>> m_print_stats.state : PRINT_STATS_STATE_CANCELLING (%s) | |
| >>>>>> m_print_stats.state : PRINT_STATS_STATE_RESUMING (%s) | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterProbeFvR12GCodeCommandEEvE | |
| +>>>>>> m_print_stats.state : PRINT_STATS_STATE_RESUMED (%s) | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterProbeFvP10HomingMoveEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterProbeFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterProbeFvvEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterProbeFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM19ProbeEndstopWrapperFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM17ProbePointsHelperFvSt6vectorIdSaIdEEEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterProbeFvP10HomingMoveEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12PrinterProbeFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12PrinterProbeFvP10HomingMoveEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM12PrinterProbeFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM12PrinterProbeFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12PrinterProbeFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM19ProbeEndstopWrapperFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM17ProbePointsHelperFvSt6vectorIdSaIdEEEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12PrinterProbeFvP10HomingMoveEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12PrinterProbeFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM19ProbeEndstopWrapperFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM17ProbePointsHelperFvSt6vectorIdSaIdEEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12PrinterProbeFvP10HomingMoveEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12PrinterProbeFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12PrinterProbeFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM12PrinterProbeFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM19ProbeEndstopWrapperFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM17ProbePointsHelperFvSt6vectorIdSaIdEEEEE | |
| St5_BindIFSt7_Mem_fnIM12PrinterProbeFvP10HomingMoveEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM12PrinterProbeFvP6HomingSt6vectorIP11PrinterRailSaIS6_EEEEPS1_St12_PlaceholderILi1EESD_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM12PrinterProbeFvvEEPS1_EE | |
| @@ -4263,8 +4536,8 @@ St5_BindIFSt7_Mem_fnIM19ProbeEndstopWrapperFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM17ProbePointsHelperFvSt6vectorIdSaIdEEEEPS1_St12_PlaceholderILi1EEEE | |
| _move_next | |
| 19ProbeEndstopWrapper | |
| -Toolhead moved during probe deactivate_gcode script | |
| Toolhead moved during probe activate_gcode script | |
| +Toolhead moved during probe deactivate_gcode script | |
| LIFT_SPEED | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/probe.cpp | |
| probe at %.3f,%.3f is z=%.6f | |
| @@ -4356,21 +4629,20 @@ horizontal_move_z can't be less than probe's z_offset | |
| cmd_BED_MESH_CALIBRATE fast | |
| cmd_BED_MESH_CALIBRATE automatic | |
| cmd_BED_MESH_CALIBRATE manual | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM16FrequencyCounterFvdjdEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_counterFvR11ParseResultEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_counterFviEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM16FrequencyCounterFvdjdEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11MCU_counterFvR11ParseResultEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_counterFvR11ParseResultEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16FrequencyCounterFvdjdEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11MCU_counterFviEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM16FrequencyCounterFvdjdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11MCU_counterFvR11ParseResultEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16FrequencyCounterFvdjdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11MCU_counterFviEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11MCU_counterFvR11ParseResultEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16FrequencyCounterFvdjdEEE | |
| St5_BindIFSt7_Mem_fnIM11MCU_counterFviEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM11MCU_counterFvR11ParseResultEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM16FrequencyCounterFvdjdEEPS1_St12_PlaceholderILi1EES6_ILi2EES6_ILi3EEEE | |
| config_counter oid= | |
| query_counter oid= | |
| -%llu | |
| poll_ticks= | |
| count_clock | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM8QueryADCFvR12GCodeCommandEEvE | |
| @@ -4386,12 +4658,12 @@ PULLUP | |
| resistance | |
| (with | |
| pullup) | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM13QueryEndstopsFvP10WebRequestEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13QueryEndstopsFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM13QueryEndstopsFvP10WebRequestEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM13QueryEndstopsFvP10WebRequestEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13QueryEndstopsFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13QueryEndstopsFvP10WebRequestEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM13QueryEndstopsFvP10WebRequestEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM13QueryEndstopsFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13QueryEndstopsFvP10WebRequestEEE | |
| St5_BindIFSt7_Mem_fnIM13QueryEndstopsFvP10WebRequestEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM13QueryEndstopsFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| query_endstops/status | |
| @@ -4500,7 +4772,6 @@ Disabled [input_shaper] for resonance testing | |
| Testing frequency | |
| Hz to | |
| Hz start: | |
| -M204 S | |
| Hz end: | |
| finish move | |
| Re-enabled [input_shaper] | |
| @@ -4540,12 +4811,14 @@ config error: homing_override and safe_z_homing cannot be used simultaneously | |
| M109 S%d | |
| endstop_query_state id= | |
| pin_value | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM16ScrewsTiltAdjustFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEvE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/safe_z_home.cpp | |
| +z_axis off limit action | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM16ScrewsTiltAdjustFvR12GCodeCommandEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM16ScrewsTiltAdjustFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM16ScrewsTiltAdjustFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM16ScrewsTiltAdjustFvR12GCodeCommandEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM16ScrewsTiltAdjustFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM16ScrewsTiltAdjustFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16ScrewsTiltAdjustFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16ScrewsTiltAdjustFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| St5_BindIFSt7_Mem_fnIM16ScrewsTiltAdjustFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEPS1_St12_PlaceholderILi1EESH_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM16ScrewsTiltAdjustFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| ffffff | |
| @@ -4714,18 +4987,18 @@ echo 1 > /proc/sys/vm/compact_memory | |
| echo 3 > /proc/sys/vm/drop_caches | |
| SAMPLING_FREQ= | |
| boost::math::bessel_ik<%1%>(%1%,%1%) | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14SkewCorrectionFbSt6vectorIdSaIdEEdEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14SkewCorrectionFSt6vectorIdSaIdEEvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM14SkewCorrectionFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM14SkewCorrectionFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM14SkewCorrectionFSt6vectorIdSaIdEEvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM14SkewCorrectionFbSt6vectorIdSaIdEEdEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14SkewCorrectionFbSt6vectorIdSaIdEEdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14SkewCorrectionFSt6vectorIdSaIdEEvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM14SkewCorrectionFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM14SkewCorrectionFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM14SkewCorrectionFSt6vectorIdSaIdEEvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM14SkewCorrectionFbSt6vectorIdSaIdEEdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM14SkewCorrectionFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM14SkewCorrectionFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14SkewCorrectionFbSt6vectorIdSaIdEEdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14SkewCorrectionFSt6vectorIdSaIdEEvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM14SkewCorrectionFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM14SkewCorrectionFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM14SkewCorrectionFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM14SkewCorrectionFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM14SkewCorrectionFbSt6vectorIdSaIdEEdEEPS1_St12_PlaceholderILi1EES9_ILi2EEEE | |
| @@ -4753,15 +5026,15 @@ SET_SKEW | |
| SKEW_PROFILE | |
| REMOVE | |
| skew_correction | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterStatsFvvEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterStatsFddEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM15PrinterSysStatsFvvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12PrinterStatsFvvEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM12PrinterStatsFddEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterStatsFddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12PrinterStatsFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM15PrinterSysStatsFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM12PrinterStatsFvvEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12PrinterStatsFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12PrinterStatsFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM15PrinterSysStatsFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM12PrinterStatsFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM12PrinterStatsFvvEEE | |
| St5_BindIFSt7_Mem_fnIM15PrinterSysStatsFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM12PrinterStatsFddEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM12PrinterStatsFvvEEPS1_EE | |
| @@ -4772,15 +5045,15 @@ cputime= | |
| MemAvailable: | |
| memavail= | |
| klippy:ready:PrinterStats | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM20PrinterStepperEnableFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM20PrinterStepperEnableFvdEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM14EnableTrackingFvdEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM20PrinterStepperEnableFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM20PrinterStepperEnableFvdEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM20PrinterStepperEnableFvdEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM20PrinterStepperEnableFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM14EnableTrackingFvdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM20PrinterStepperEnableFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM20PrinterStepperEnableFvdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM20PrinterStepperEnableFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14EnableTrackingFvdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM20PrinterStepperEnableFvdEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM20PrinterStepperEnableFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM14EnableTrackingFvdEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM20PrinterStepperEnableFvdEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM20PrinterStepperEnableFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -4922,7 +5195,6 @@ GAP_POS = [00= | |
| max_z_detection: | |
| G29 probe_by_step failed | |
| ***************now_pos[2] : | |
| -***************** | |
| MIN_HOLD | |
| MAX_HOLD | |
| _move(%f,%f,%f) speed:%f | |
| @@ -4966,6 +5238,30 @@ kalma_q_ | |
| [filter] kalma_r_ size error! size(%d) < hx711s_count_(%d) | |
| [filter] kalma_q_[%d]:%f | |
| [filter] kalma_r_[%d]:%f | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12SwitchSensorFvdbEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM12SwitchSensorFvvEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12SwitchSensorFvdbEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM12SwitchSensorFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM12SwitchSensorFvdbEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM12SwitchSensorFvvEEE | |
| +St5_BindIFSt7_Mem_fnIM12SwitchSensorFvvEEPS1_EE | |
| +St5_BindIFSt7_Mem_fnIM12SwitchSensorFvdbEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| +12SwitchSensor | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/switch_sensor.cpp | |
| +Switch sensor %s ready | |
| +Switch sensor %s is online | |
| +Switch sensor %s is offline | |
| +Switch sensor %s state changed to: %d | |
| +Switch Sensor | |
| +: switch is ON | |
| +: switch is OFF | |
| +Switch sensor %s enabled: %d | |
| +Switch sensor %s state change callback registered | |
| +online_pin | |
| +switch_pin | |
| +switch_pin : | |
| +Query the status of the Switch Sensor | |
| +Sets the switch sensor on/off | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM20PrinterSensorGenericFvddEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM20PrinterSensorGenericFvddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM20PrinterSensorGenericFvddEEE | |
| @@ -4998,12 +5294,12 @@ St22_Weak_result_type_implISt7_Mem_fnIM16TMCCommandHelperFvdbEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM19TMCVirtualPinHelperFvP10HomingMoveEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM19TMCVirtualPinHelperFvbEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM16TMCCommandHelperFvdEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM16TMCCommandHelperFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16TMCCommandHelperFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16TMCCommandHelperFvdbEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM19TMCVirtualPinHelperFvP10HomingMoveEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM19TMCVirtualPinHelperFvbEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM16TMCCommandHelperFvdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM16TMCCommandHelperFvvEEE | |
| St5_BindIFSt7_Mem_fnIM16TMCCommandHelperFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM16TMCCommandHelperFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM16TMCCommandHelperFvdbEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| @@ -5163,23 +5459,40 @@ uart_address | |
| _do_get_register:addr:%x reg:%x register_val %s:%x | |
| Unable to write tmc uart : %s register : %s | |
| Unable to read tmc uart '%s' register %s | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM19FilamentWidthSensorFddEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM19FilamentWidthSensorFddEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM19FilamentWidthSensorFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM19FilamentWidthSensorFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM19FilamentWidthSensorFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM19FilamentWidthSensorFvddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM19FilamentWidthSensorFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM19FilamentWidthSensorFddEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM19FilamentWidthSensorFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM19FilamentWidthSensorFvddEEE | |
| St5_BindIFSt7_Mem_fnIM19FilamentWidthSensorFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM19FilamentWidthSensorFvddEEPS1_St12_PlaceholderILi1EES6_ILi2EEEE | |
| St5_BindIFSt7_Mem_fnIM19FilamentWidthSensorFddEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM19FilamentWidthSensorFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +Filament dia (measured mm): | |
| +Filament NOT present | |
| +Filament width sensor Turned On | |
| +Filament width sensor is already On | |
| +Filament width measurements cleared! | |
| +M221 S100 | |
| +Filament width sensor Turned Off | |
| +Filament width sensor is already Off | |
| +default_nominal_filament_diameter | |
| +measurement_delay | |
| +max_difference | |
| klippy:ready:FilamentWidthSensor | |
| +extrude_factor_update_timer | |
| +QUERY_FILAMENT_WIDTH | |
| +RESET_FILAMENT_WIDTH_SENSOR | |
| +DISABLE_FILAMENT_WIDTH_SENSOR | |
| +ENABLE_FILAMENT_WIDTH_SENSOR | |
| +M221 S | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11TuningTowerFbSt6vectorIdSaIdEEdEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11TuningTowerFbSt6vectorIdSaIdEEdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11TuningTowerFbSt6vectorIdSaIdEEdEEE | |
| @@ -5188,10 +5501,10 @@ Tool to adjust a parameter at each Z height | |
| Ending tuning test mode | |
| PARAMETER | |
| FACTOR | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM11HeaterCheckFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11HeaterCheckFddEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM11HeaterCheckFvvEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM11HeaterCheckFvvEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11HeaterCheckFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM11HeaterCheckFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11HeaterCheckFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11HeaterCheckFvvEEE | |
| St5_BindIFSt7_Mem_fnIM11HeaterCheckFvvEEPS1_EE | |
| @@ -5206,23 +5519,35 @@ Heater %s approaching new target of %.3f | |
| Heater %s no longer approaching target %.3f | |
| klippy:connect:HeaterCheck | |
| klippy:shutdown:HeaterCheck | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM9VirtualSDFddEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM9VirtualSDFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM9VirtualSDFvvEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM9VirtualSDFddEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM9VirtualSDFvR12GCodeCommandEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM9VirtualSDFvR12GCodeCommandEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM9VirtualSDFddEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM9VirtualSDFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM9VirtualSDFddEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM9VirtualSDFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM9VirtualSDFddEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM9VirtualSDFvvEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM9VirtualSDFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM9VirtualSDFddEEE | |
| St5_BindIFSt7_Mem_fnIM9VirtualSDFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM9VirtualSDFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM9VirtualSDFddEEPS1_St12_PlaceholderILi1EEEE | |
| +do_pause | |
| +do_resume | |
| +work_handler | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/virtual_sdcard.cpp | |
| +is_work_active() = true do_pause | |
| +m_in_work_handler = true | |
| +%s unregister_timer(m_work_timer) | |
| +why i am here????????? | |
| +do_pause: single_command SAVE_VARIABLE VARIABLE=virtual_sd_stats-m_is_active | |
| SAVE_VARIABLE VARIABLE=virtual_sd_stats-m_is_active VALUE= | |
| +do_resume: m_current_file.is_open() = false | |
| +do_resume: m_current_file.is_open() = true | |
| +%s: is_work_active() = false register timer | |
| sd_work | |
| +%s: is_work_active() = true do nothing why i am here????????? | |
| SD card ok | |
| taskid | |
| -/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/extras/virtual_sdcard.cpp | |
| Failed to open file %s | |
| File opened: | |
| Size: | |
| @@ -5250,7 +5575,6 @@ System Volume Information | |
| ptr->d_name = %s | |
| Begin file list | |
| End file list | |
| -%lld | |
| SET_PRINT_STATS_INFO CURRENT_LAYER=%d TOTAL_LAYERS=%d | |
| SET_PRINT_STATS_INFO LAST_PRINT_TIME= | |
| SET_PRINT_STATS_INFO ALREAD_PRINT_TIME ALREAD_PRINT_TIME= | |
| @@ -5261,7 +5585,13 @@ M106 P2 S | |
| M106 P3 S | |
| STOP_RESUME X= | |
| save_z_stop= | |
| +%s: delay_unregister_timer() = true | |
| Done printing file | |
| +%s `work_handler: m_in_work_handler = false | |
| +%s work_handler: m_current_file.is_open() = true | |
| +%s work_handler: m_current_file.is_open() = false | |
| +%s work_handler: note_complete | |
| +%s work_handler: m_in_work_handler = false | |
| FILENAME | |
| FILESLICE | |
| print filename = %s | |
| @@ -5270,18 +5600,18 @@ St22_Maybe_get_result_typeISt7_Mem_fnIM4WiFiFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM4WiFiFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM4WiFiFvR12GCodeCommandEEE | |
| St5_BindIFSt7_Mem_fnIM4WiFiFvR12GCodeCommandEEPS1_St12_PlaceholderILi1EEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM5ZTiltFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM5ZTiltFvR12GCodeCommandEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13ZAdjustHelperFvvEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM13ZAdjustStatusFvdEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM5ZTiltFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM5ZTiltFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM5ZTiltFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM5ZTiltFvR12GCodeCommandEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13ZAdjustHelperFvvEEE | |
| St22_Weak_result_type_implISt7_Mem_fnIM13ZAdjustStatusFvdEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM5ZTiltFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM5ZTiltFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13ZAdjustHelperFvvEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM13ZAdjustStatusFvdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM5ZTiltFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM5ZTiltFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13ZAdjustHelperFvvEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM13ZAdjustStatusFvdEEE | |
| St5_BindIFSt7_Mem_fnIM13ZAdjustHelperFvvEEPS1_EE | |
| St5_BindIFSt7_Mem_fnIM13ZAdjustStatusFvdEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM5ZTiltFNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt6vectorIdSaIdEES8_ISA_SaISA_EEEEPS1_St12_PlaceholderILi1EESH_ILi2EEEE | |
| @@ -5291,7 +5621,6 @@ RETRY_TOLERANCE | |
| klippy:connect::ZAdjustHelper | |
| stepper_enable:motor_off::ZAdjustStatus | |
| done | |
| -retries | |
| retry_tolerance | |
| Probed points range | |
| z_positions | |
| @@ -5461,15 +5790,15 @@ echo 1 > /sys/class/gpio/gpio33/value | |
| echo 0 > /sys/class/gpio/gpio33/value | |
| echo 1 > /sys/class/gpio/gpio192/value | |
| echo 0 > /sys/class/gpio/gpio192/value | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM14CartKinematicsFvR12GCodeCommandEEvE | |
| -St22_Maybe_get_result_typeISt7_Mem_fnIM14CartKinematicsFvdEEvE | |
| St22_Maybe_get_result_typeISt7_Mem_fnIM11MCU_stepperFvdEEvE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM14CartKinematicsFvR12GCodeCommandEEE | |
| -St22_Weak_result_type_implISt7_Mem_fnIM14CartKinematicsFvdEEE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14CartKinematicsFvdEEvE | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIM14CartKinematicsFvR12GCodeCommandEEvE | |
| St22_Weak_result_type_implISt7_Mem_fnIM11MCU_stepperFvdEEE | |
| -St17_Weak_result_typeISt7_Mem_fnIM14CartKinematicsFvR12GCodeCommandEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14CartKinematicsFvdEEE | |
| +St22_Weak_result_type_implISt7_Mem_fnIM14CartKinematicsFvR12GCodeCommandEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM11MCU_stepperFvdEEE | |
| St17_Weak_result_typeISt7_Mem_fnIM14CartKinematicsFvdEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIM14CartKinematicsFvR12GCodeCommandEEE | |
| 10Kinematics | |
| St5_BindIFSt7_Mem_fnIM11MCU_stepperFvdEEPS1_St12_PlaceholderILi1EEEE | |
| St5_BindIFSt7_Mem_fnIM14CartKinematicsFvdEEPS1_St12_PlaceholderILi1EEEE | |
| @@ -5577,6 +5906,906 @@ G0 Z%.2f F180 | |
| G1 E5 F2400 | |
| G1 E-5 F3600 | |
| G0 X110 Y110 Z50 | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIMN11multi_color14LiteMultiColorEFvR12GCodeCommandEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIMN11multi_color14LiteMultiColorEFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIMN11multi_color14LiteMultiColorEFvR12GCodeCommandEEE | |
| +St5_BindIFSt7_Mem_fnIMN11multi_color14LiteMultiColorEFvR12GCodeCommandEEPS2_St12_PlaceholderILi1EEEE | |
| +St23_Sp_counted_ptr_inplaceIN11multi_color24LiteMultiColorOperationsESaIS1_ELN9__gnu_cxx12_Lock_policyE2EE | |
| +ymodem_update | |
| +cmd_MULTICOLOR_RESUME | |
| +cmd_CHECK_AUTO_REFIL_FILAMENT | |
| +cmd_WRAPPING_RESUME | |
| +cmd_AUTO_REFIL_FILAMENT | |
| +cmd_LOAD_MATERIAL | |
| +cmd_UNLOAD_MATERIAL | |
| +cmd_T | |
| +cmd_M749 | |
| +initialize | |
| +N11multi_color14LiteMultiColorE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/lite_multi_color.cpp | |
| +lite_multi_color | |
| +Lite multi-color module communication init work failed, try to update firmware | |
| +Lite multi-color module ymodem update failed | |
| +Lite multi-color module ymodem update success, try to communication init work again | |
| +Lite multi-color module communication init work success | |
| +init modbus failed | |
| +lite multi-color module software version: %d | |
| +lite multi-color module hardware version: %d | |
| +lite multi-color module board serial number: %d | |
| +Lite multi-color operations handler is null | |
| +[%s] start | |
| +/lib/firmware/upgrade_ams_lite.bin | |
| +[%s] device_path: %s firmware_path: %s | |
| +lite multi-color module ymodem_transmit | |
| +lite multi-color module ymodem_transmit %d | |
| +lite multi-color module ymodem upgrade failed, ret:%d | |
| +lite multi-color module ymodem_init failed | |
| +lite multi-color module ymodem_deint | |
| +lite multi-color module upgrade completed | |
| +active channel is -1, check auto refill filament failed, report runout event | |
| +active channel: %d, check auto refill filament success, don't need to report runout event | |
| +Lite multi-color module destructor | |
| +RFID_FILAMENT cmd: %d | |
| +RFID_MODULE_COMMAND_RESET | |
| +Invalid or unsupported RFID_FILAMENT cmd: %d | |
| +[%s] wrapping resume process | |
| +Failed to wrapping resume | |
| +wrapping resume success, resume gcode | |
| +not lacking material, don't need to auto refill filament | |
| +first publish custom_filament_switch SRV_STATE_CUSTOM_FILAMENT_SWITCH_CLEAR | |
| +[%s] get channel: %d material status | |
| +Failed to read channel: %d material status | |
| +[%s] channel_material_status: %d error, input sensor not ready | |
| +[%s] channel_material_status: %d error, input sensor not ready, but fiveway has material, extrude E Axis 20mm | |
| +G1 E20 F1800 | |
| +[%s] fiveway sensor state: %04x channel_material_status: %d, input sensor not check, fiveway has no material, return | |
| +Failed to update material status for channel %d | |
| +auto refill filament is disabled | |
| +auto refill filament success, resume gcode | |
| +check auto refill filament failed, report runout event | |
| +publish custom_filament_switch SRV_STATE_CUSTOM_FILAMENT_SWITCH_TRIGGER | |
| +CHANNEL_ID | |
| +break resmum..... | |
| +channel_id: %d is active channel, don't need to load material. | |
| +Failed to load material to channel %d | |
| +LOAD_MATERIAL channel_id: %d | |
| +Channel ID: %d is not specified or out of range | |
| +identify active channel failed | |
| +[%s] channel_id(%d) active_channel_id(%d) | |
| +Failed to cut off filament from channel %d | |
| +Failed to unload material from channel %d | |
| +target channel %d = active channel %d, don't need to load material. | |
| +UNLOAD_MATERIAL channel_id: %d | |
| +Multi-color module is not in IDLE state | |
| +Material is already unloaded, channel_id: %d, don't need to unload material. | |
| +Failed to unload material from channel %d now actived channel_id: %d | |
| +[%s] unload material from channel %d and cut off filament | |
| +[%s] start unload material from channel %d | |
| +[%s] gcode_t_id(%d) --> channel_id(%d) | |
| +Invalid channel id: %d (must be 0-%d), gcode_t_id: %d | |
| +[%s] gcode_t_id(%d) channel_id(%d) active_channel_id(%d) | |
| +gcode_t_id(%d) channel_id(%d) active_channel_id(%d) don't need to load material. | |
| +[%s] active_channel_material_type: %d, active_channel_material_color: 0x%06x, target_channel_material_type: %d, target_channel_material_color: 0x%06x | |
| +current channel: %d, target channel: %d, color are the same, don't need to load material. | |
| +control power pin: %s, enable: %d | |
| +Power pin is not set | |
| +[%s] M749 | |
| +get now active channel id failed | |
| +UNLOAD_MATERIAL CHANNEL_ID= | |
| +M749 success, unload material from channel %d | |
| +Lite multi-color module power_pin: %s | |
| +Lite multi-color module identification failed, retry %d | |
| +Lite multi-color module retry %d | |
| +Lite multi-color module ymodem update failed, retry %d | |
| +delay 3 seconds and then initialize multi-color module............... | |
| +Lite multi-color module initialize completed | |
| +Lite multi-color module base class initialization failed, retry %d | |
| +shutdown power pin 2 seconds and then open power pin | |
| +[%s] initialize completed %d | |
| +Lite multi-color module observer initialize completed | |
| +Lite multi-color start initialize operations handler | |
| +Lite multi-color module initialize failed | |
| +Lite multi-color G-code commands registered successfully | |
| +Lite multi-color module initialization successful, device path: %s, baudrate: %d | |
| +LOAD_MATERIAL | |
| +UNLOAD_MATERIAL | |
| +AUTO_REFIL_FILAMENT | |
| +CHECK_AUTO_REFIL_FILAMENT | |
| +RFID_FILAMENT | |
| +MULTICOLOR_BREAK_RESUME | |
| +Lite multi-color module construction | |
| +Lite multi-color module construction completed | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIMN11multi_color24LiteMultiColorOperationsEFddEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIMN11multi_color24LiteMultiColorOperationsEFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIMN11multi_color24LiteMultiColorOperationsEFddEEE | |
| +St5_BindIFSt7_Mem_fnIMN11multi_color24LiteMultiColorOperationsEFddEEPS2_St12_PlaceholderILi1EEEE | |
| +write_rfid_material_info | |
| +sync_init_params | |
| +set_five_way_sensor_state | |
| +wrapping_sensor_state_change | |
| +set_rfid_module_command | |
| +action_pause | |
| +wrapping_resume | |
| +action_move_2_extruder | |
| +action_hotbed_lift | |
| +set_is_t_load | |
| +action_cutoff_filament | |
| +release_motor | |
| +unload_material | |
| +set_target_channel_id | |
| +find_new_target_materials | |
| +auto_refill_filament | |
| +read_rfid_material_info | |
| +rfid_check_timer_callback | |
| +LiteMultiColorOperations | |
| +flush_material | |
| +identify_active_channel | |
| +load_material | |
| +monitor_handle | |
| +N11multi_color24LiteMultiColorOperationsE | |
| +*ZN11multi_color24LiteMultiColorOperationsC4ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt10shared_ptrINS_23MultiColorCommunicationEES9_INS_17MultiColorChannelEES9_INS_15MultiColorStateEEEUlNS_11ModuleStateESG_E_ | |
| +*ZN11multi_color24LiteMultiColorOperationsC4ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt10shared_ptrINS_23MultiColorCommunicationEES9_INS_17MultiColorChannelEES9_INS_15MultiColorStateEEEUlttE0_ | |
| +*ZN11multi_color24LiteMultiColorOperationsC4ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt10shared_ptrINS_23MultiColorCommunicationEES9_INS_17MultiColorChannelEES9_INS_15MultiColorStateEEEUlttE1_ | |
| +*ZN11multi_color24LiteMultiColorOperationsC4ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt10shared_ptrINS_23MultiColorCommunicationEES9_INS_17MultiColorChannelEES9_INS_15MultiColorStateEEEUlttE2_ | |
| +*ZN11multi_color24LiteMultiColorOperationsC4ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt10shared_ptrINS_23MultiColorCommunicationEES9_INS_17MultiColorChannelEES9_INS_15MultiColorStateEEEUlttE3_ | |
| +*ZN11multi_color24LiteMultiColorOperationsC4ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt10shared_ptrINS_23MultiColorCommunicationEES9_INS_17MultiColorChannelEES9_INS_15MultiColorStateEEEUlttE4_ | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/lite_multi_color_operations.cpp | |
| +lite_multi_color_ops | |
| +Feeding continuously for channel %d in Lite version is not supported. | |
| +%s(channel_id: %d) | |
| +Modbus write failed: Failed to set extruder filament sensor state | |
| +Modbus write success: set extruder filament sensor state:0x%04x | |
| +Failed to clear E400 error for channel %d | |
| +clear E400 error for channel %d | |
| +Refreshing all channels information (Lite version) | |
| +Refreshing channel %d information (Lite version) | |
| +Updated channel %d material status: %d | |
| +Failed to read material status for channel %d | |
| +[%s] modbus write failed: set m_pre_load_distance | |
| +[%s] modbus write failed: set load_speed | |
| +[%s] modbus write failed: set unload_speed | |
| +[%s] modbus write failed: set load_extra_speed | |
| +[%s] modbus write failed: set load_extra_distance | |
| +[%s] modbus write failed: set unload_extra_speed | |
| +[%s] modbus write failed: set unload_extra_distance | |
| +[%s] modbus write failed: set pre_load_timeout | |
| +[%s] modbus write failed: set load_extra_timeout | |
| +[%s] modbus write failed: set unload_extra_timeout | |
| +[%s] modbus write failed: set load_timeout | |
| +[%s] modbus write failed: set unload_timeout | |
| +[%s] modbus write failed: set loaded_timeout | |
| +[%s] modbus write failed: set load_retry_back_distance | |
| +[%s] modbus write failed: set unload_retry_forward_distance | |
| +[%s] modbus write failed: set load_unload_retry_cnt | |
| +[%s] modbus write failed: set motor_pulses_per_revolution | |
| +[%s] modbus write failed: set m_odom_pulses_per_revolution | |
| +[%s] modbus write failed: set m_odom_distance_per_revolution | |
| +[%s] modbus write failed: set motor_revolution_per_odom_revolution | |
| +[%s] modbus write failed: set motor_release_circle | |
| +[%s] sync five_way_sensor_state: %04x | |
| +[%s] modbus write failed: set extruder_filament_sensor_state | |
| +[%s] set target_channel: %d | |
| +[%s] modbus write failed: set target_channel | |
| +[%s] set active channel: %d | |
| +[%s] Failed to set active channel for channel %d | |
| +[%s] no active channel:%d, don't set target_channel | |
| +[%s] no material in five way sensor, don't sync target_channel | |
| +[%s] modbus read failed: read software version | |
| +[%s] modbus read failed: read hardware version | |
| +[%s] modbus read failed: read board serial number | |
| +[%s] success | |
| +[%s] | |
| +[%s] modbus write failed: set pre_load_speed | |
| +[%s] wrapping_sensor_state_change: %d | |
| +Modbus write failed: Failed to set extruder wrapping sensor state | |
| +[%s] set_rfid_module_command: %d | |
| +[%s] modbus write failed: reset RFID module | |
| +[%s] modbus read failed: read RFID module status | |
| +[%s] RFID_MODULE_STATUS_REG_ADDR: %d | |
| +wrapping resume process: extrude -2mm times: %d | |
| +G1 E-2 F600 | |
| +[%s]lite wrapping resume extrude success!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! | |
| +M106 S76 | |
| +[%s] move to extruder | |
| +[%s] target_temp is 0 | |
| +[%s] target_temp is %f force set to %f, min_extrude_temp: %f | |
| +[%s] target_temp: %f | |
| +MOVE_TO_EXTRUDE TARGET_TEMP=%f MOVE=1 LIMIT_Z=0 | |
| +[%s] hotbed lift %d mm | |
| +G1 Z%d F1800 | |
| +[%s] hotbed lift distance is 0, return | |
| +[%s] set_is_t_load: %d | |
| +[%s] retract %f mm before cut off | |
| +G1 E-%f F1800 | |
| +CUT_OFF_FILAMENT ZERO_NOZZLE=0 | |
| +[%s] cut sensor state is 0, fail to cut off filament | |
| +[%s] retract %f mm after cut off | |
| +[%s] forward %f mm after cut off | |
| +G1 E%f F1800 | |
| +[%s] release_motor: channel_id: %d, circle: %f, is_forward: %d | |
| +[%s] forward release active channel: %d motor | |
| +Failed to forward release all motor | |
| +[%s] reverse release active channel: %d motor | |
| +Failed to reverse release all motor | |
| +[%s] forward release all motor | |
| +[%s] reverse release all motor | |
| +LOADING | |
| +NONE | |
| +UNLOADING | |
| +LOADED | |
| +UNLOADED | |
| +Starting material unloading process for channel %d (Lite version) | |
| +Invalid channel id: %d | |
| +Channel %d status: %s slave_id: %d | |
| +[%s] modbusWriteRegister(m_slave_id, reg::TARGET_COLOR_NUM_REG_ADDR, channel_id) | |
| +Failed to set target color for channel %d | |
| +Channel %d material unloaded successfully (Lite version) | |
| +[%s] channel_material_status: %d, break, continue unload---------------------------------------- | |
| +Failed to start pre unloading material for channel %d | |
| +Timeout:%d ms waiting for material pre unload completion for channel %d | |
| +start to retract material 25mm...... | |
| +G1 E-25 F%d | |
| +Failed to start unloading material for channel %d | |
| +G1 E-%d F%d | |
| +[%s] wait CHANNEL_MATERIAL_STATUS_UNLOADING_AND_LEFT_FIVEWAY timeout, wait_cnt: %d > %d ms | |
| +Timeout:%d ms waiting for material unloading completion for channel %d | |
| +forward release motor:%d %f circles for load material reduce resistance-------------------------------- | |
| +loaded_channel | |
| +fw_updating | |
| +[%s] set_target_channel_id, channel_id(%d) is invalid | |
| +[%s] channel_id(%d) | |
| +[%s] find_new_target_materials, active_ch(%d) color(%06x) material_type(%d) material_subclass(%d)--------------------------------- | |
| +[%s] find_new_target_materials, array_status.size(%d)------------------------------------ | |
| +Found channel with ID: %d | |
| +[%s] find_new_target_materials, channel(%d) preload ok | |
| +[%s] find_new_target_materials channel(%d) but preload not ok, continue...... | |
| +[%s] is_in_opcoupler_lacking_material is false, return!!! | |
| +[%s] active_ch(%d) < 0 or >= 4 | |
| +[%s] find same material type channel failed, active_ch(%d) | |
| +[%s] start move to trash bin | |
| +[%s] move to trash bin, extrude 10mm | |
| +G1 E10 F500 | |
| +[%s] move to trash bin done | |
| +[%s] load material:%d failed!!! | |
| +[%s] auto_refill_filament done | |
| +identify_code:%02x | |
| +manufacturer_code:%02x%02x%02x%02x | |
| +material_code:%02x%02x | |
| +material_type:%02x%02x%02x%02x | |
| +material_name:%02x%02x | |
| +material_color_code:%02x%02x%02x | |
| +material_color_transparency:%02x | |
| +material_production_date:%02x%02x | |
| +material_min_print_temp:%02x%02x | |
| +material_max_print_temp:%02x%02x | |
| +material_min_hotbed_temp:%02x | |
| +material_max_hotbed_temp:%02x | |
| +material_max_drying_temp:%02x | |
| +material_max_drying_time:%02x | |
| +material_diameter:%02x%02x | |
| +material_weight:%02x%02x | |
| +fan_control:%02x | |
| +sizeof(elegoo_filament_epc256_data): %d | |
| +%s(%s(rfid_module_status:) %d, __FUNCTION__) | |
| +%s(channel_id: %d) timeout | |
| +[%s] modbus read failed: elegoo_filament_epc256_data | |
| +[%s] modbus write success: reset RFID module | |
| +[%s] RFID_MODULE_STATUS_READ_OK | |
| +[%s] modbus write failed: read RFID material info | |
| +AMS_WORK_STATE_REG_ADDR: 0x%02x == APP_WORK_STATE | |
| +AMS_WORK_STATE_REG_ADDR: 0x%02x != BOOTLOADER_WORK_STATE | |
| +modebus communication error, BOOTLOADER_WORK_STATE | |
| +resume load material m_target_channel_id: %d get_current_target_channel().channel_id: %d | |
| +LOAD_MATERIAL CHANNEL_ID= | |
| +filament_switch_sensor_timer | |
| +lite_manual_load_gcode | |
| +M106 S76,M104 S190,M106 S178,G1 E25 F523,M729,G1 E1 F50,G1 E11.5 F523,G1 E1 F50,G1 E11.5 F523,M729,G1 E1 F50,G1 E11.5 F523,G1 E1 F50,G1 E11.5 F523,M729,G1 E1 F50,G1 E11.5 F523,G1 E1 F50,G1 E11.5 F523,M729,M106 S0 | |
| +lite_t_load_gcode | |
| +G1 E20 F1200,M400 | |
| +unload_before_cutoff_react_distance | |
| +unload_after_cutoff_react_distance | |
| +unload_after_cutoff_forward_distance | |
| +pre_load_speed | |
| +pre_load_distance | |
| +unload_speed | |
| +load_extra_speed | |
| +load_extra_distance | |
| +unload_extra_speed | |
| +unload_extra_distance | |
| +pre_load_timeout | |
| +load_extra_timeout | |
| +unload_extra_timeout | |
| +unload_timeout | |
| +loaded_timeout | |
| +load_retry_back_distance | |
| +unload_retry_forward_distance | |
| +load_unload_retry_cnt | |
| +motor_pulses_per_revolution | |
| +odom_pulses_per_revolution | |
| +odom_distance_per_revolution | |
| +motor_revolution_per_odom_revolution | |
| +motor_release_circle | |
| +lacking_material_timeout | |
| +hotbed_lift_distance | |
| +flush_material_threshold | |
| +lacked_filament_used_threshold | |
| +[%s] lite_manual_load_gcode: %s | |
| +[%s] lite_t_load_gcode: %s | |
| +[%s] unload_before_cutoff_react_distance: %f | |
| +[%s] unload_after_cutoff_react_distance: %f | |
| +[%s] unload_after_cutoff_forward_distance: %f | |
| +[%s] pre_load_speed: %d | |
| +[%s] pre_load_distance: %d | |
| +[%s] load_speed: %d | |
| +[%s] unload_speed: %d | |
| +[%s] load_extra_speed: %d | |
| +[%s] load_extra_distance: %d | |
| +[%s] unload_extra_speed: %d | |
| +[%s] unload_extra_distance: %d | |
| +[%s] fw_updating: %d | |
| +[%s] pre_load_timeout: %d | |
| +[%s] load_extra_timeout: %d | |
| +[%s] unload_extra_timeout: %d | |
| +[%s] load_timeout: %d | |
| +[%s] unload_timeout: %d | |
| +[%s] loaded_timeout: %d | |
| +[%s] load_retry_back_distance: %d | |
| +[%s] unload_retry_forward_distance: %d | |
| +[%s] load_unload_retry_cnt: %d | |
| +[%s] m_motor_pulses_per_revolution: %d | |
| +[%s] m_odom_pulses_per_revolution: %d | |
| +[%s] m_odom_distance_per_revolution: %f | |
| +[%s] m_motor_revolution_per_odom_revolution: %f | |
| +[%s] m_motor_release_circle: %f | |
| +[%s] m_lacking_material_timeout: %d seconds | |
| +[%s] m_hotbed_lift_distance: %d | |
| +[%s] m_flush_material_threshold: %d | |
| +[%s] m_lacked_filament_used_threshold: %.2f | |
| +rfid_check_timer | |
| +[%s] run gcode | |
| +[%s] before flush material odometry_value: %d %d %d %d | |
| +[%s] t code flush material exe code: %s | |
| +[%s] not t code flush material exe code: %s | |
| +[%s] after flush material odometry_value: %d %d %d %d | |
| +[%s] after flush material odometry_value_change: %d %d %d %d | |
| +[%s] odometry_value_change is less than m_flush_material_threshold: %d, need to flush material again | |
| +[%s] channel %d odometry_change: %d odometry_threshold: %d | |
| +[%s] max_odometry_change_channel: %d max_odometry_change: %d | |
| +[%s] active_channel_cnt: %d, max_odometry_change_channel:%d | |
| +Failed to set active channel for channel %d | |
| +[%s] -------------------------------------------->[Lite MultiColor] identify success: %d | |
| +[%s] identify_active_channel failed, active_channel_cnt: %d | |
| +[%s] identify_active_channel flag: %d, return m_now_channel_id: %d | |
| +although active channel has material, but five channel has no material, need to load material. | |
| +five channel has material, return active channel id: %d | |
| +[%s] -------------------------------------------->[Lite MultiColor] five way has material, has_material_cnt(%d) | |
| +forward release all motor: %f circles for load material reduce resistance-------------------------------- | |
| +reverse release motor: %d %f circles for load material reduce resistance-------------------------------- | |
| +[%s] identify_active_channel failed, retry times: %d | |
| +[%s] -------------------------------------------->[Lite MultiColor] no material in five way | |
| +Starting material loading process for channel %d (Lite version) | |
| +[%s] set target channel id: %d | |
| +[%s] channel_material_status: %d error, preload not ready | |
| +[%s] channel_material_status: %d error, preload not ready, return false----------------------------------------- | |
| +[%s] find same material type channel failed, channel_id(%d) | |
| +[%s] find same material type channel success, last_channel_id(%d) --> new_channel_id(%d) | |
| +[%s] channle: %d ,channel_material_status: %d success, break---------------------------------------- | |
| +[%s] modbusWriteRegister(m_slave_id, reg::CHANNEL_MATERIAL_COMMAND_REG_ADDR, (uint16_t)ChannelMaterialCommand::CHANNEL_MATERIAL_COMMAND_LOAD) | |
| +Failed to start loading material for channel %d | |
| +[%s] wait CHANNEL_MATERIAL_STATUS_REG_ADDR:CHANNEL_MATERIAL_STATUS_LOADING_AND_ARRIVED_FIVEWAY | |
| +Timeout waiting for material loading completion for channel %d | |
| +[%s] wait m_five_way_sensor_state CHANNEL_MATERIAL_STATUS_LOADING_AND_ARRIVED_FIVEWAY timeout, wait_cnt: %d > %d ms | |
| +[%s] m_five_way_sensor_state CHANNEL_MATERIAL_STATUS_LOADING_AND_ARRIVED_FIVEWAY, wait_cnt: %d timeout: %d | |
| +single_command G1 E%d F%d | |
| +[%s] flush material failed, channel_id: %d | |
| +Timeout:%d ms waiting for material loading completion for channel %d | |
| +Channel %d material loaded successfully (Lite version) | |
| +[%s] channel(%d) lacking flag for timeout: %d seconds is_checking: %d | |
| +[%s] m_lacked_filament_used:%.2f first_lacked_filament_used:%.2f | |
| +[%s] m_lacked_filament_used:%.2f > m_lacked_filament_used_threshold:%.2f | |
| +runout event detected, AUTO_REFIL_FILAMENT && CHECK_AUTO_REFIL_FILAMENT | |
| +[%s] is_in_opcoupler_lacking_material:%d -> %d | |
| +St14default_deleteIN11multi_color15MultiColorStateEE | |
| +St14default_deleteIN11multi_color17MultiColorChannelEE | |
| +St14default_deleteIN11multi_color23MultiColorCommunicationEE | |
| +St19_Sp_counted_deleterIPN11multi_color23MultiColorCommunicationESt14default_deleteIS1_ESaIvELN9__gnu_cxx12_Lock_policyE2EE | |
| +St19_Sp_counted_deleterIPN11multi_color17MultiColorChannelESt14default_deleteIS1_ESaIvELN9__gnu_cxx12_Lock_policyE2EE | |
| +St19_Sp_counted_deleterIPN11multi_color15MultiColorStateESt14default_deleteIS1_ESaIvELN9__gnu_cxx12_Lock_policyE2EE | |
| +set_auto_refill_filament | |
| +identify | |
| +set_multi_color_type | |
| +set_connect_status | |
| +ReleaseCommunication | |
| +InitializeCommunication | |
| +initialize | |
| +N11multi_color10MultiColorE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color.cpp | |
| +[%s] enable: %d | |
| +Multi-color module closed | |
| +Cannot feed continuously: module not connected | |
| +Cannot feed continuously: channel %d not enabled | |
| +Stopping continuous feeding for channel %d | |
| +Starting continuous feeding for channel %d, speed: %.2f mm/s | |
| +Cannot change tool: invalid channel ID %d | |
| +Cannot change tool: channel %d not enabled | |
| +Channel %d is already active, no need to switch | |
| +Failed to switch to channel %d | |
| +Successfully switched to channel %d | |
| +Cannot change tool: module not ready | |
| +Cannot load material: channel %d not enabled | |
| +Base class does not implement material loading logic, it should be implemented in derived classes | |
| +Failed to load material for channel %d | |
| +Channel %d material loaded successfully | |
| +Cannot load material: module not ready | |
| +Cannot unload material: channel %d not enabled | |
| +Base class does not implement material unloading logic, it should be implemented in derived classes | |
| +Failed to unload material for channel %d | |
| +Channel %d material unloaded successfully | |
| +Cannot unload material: module not ready | |
| +Device name not specified in configuration | |
| +[%s] Failed to open /dev/serial/by-id directory | |
| +[%s] Scanning for multi-color module with name: %s | |
| +[%s] Found device: %s | |
| +[%s] Found matching device: %s | |
| +No matching multi-color module found | |
| +Multi-color module identified at: %s | |
| +Multi-color module base class destructed | |
| +State management not initialized | |
| +%s: %d | |
| +%s: %d | |
| +ReleaseModbus | |
| +ReleaseModbus success | |
| +X0302 | |
| +STANDARD reset m_device_name: %s | |
| +LITE reset m_device_name: %s | |
| +Subclass communication init work failed | |
| +Communication is not initialized | |
| +Multi-color module base class constructed, section: %s, max channels: %d | |
| +Multi-color module communication initialization failed | |
| +Channel management initialization failed | |
| +State management initialization failed | |
| +Multi-color module basic initialization completed | |
| +HOVB|_A | |
| +SPIH | |
| +HOVB | |
| +SPIH | |
| +set_current_active_channel | |
| +set_current_target_channel | |
| +push_alarm_code | |
| +PETG | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color_channel.cpp | |
| +multi_color_channel | |
| +Channel status change callback function exception: %s | |
| +Invalid channel ID: %d | |
| +Channel %d material information updated, type: 0x%04X, color: 0x%08X | |
| +Channel status change callback function registered | |
| +set_active_channel: channel_id = %d | |
| +get_channel_by_T_command_id: T_command_id = %d, m_t_id_to_channel.size() = %d | |
| +get_channel_by_T_command_id: T_command_id = %d, channel_id = %d | |
| +get_channel_by_channel_id: channel_id = %d, status = %d | |
| +get_channel_by_channel_id: channel_id = %d, not found | |
| +get_channel_by_T_command_id: T_command_id = %d, not found | |
| +get_channel_color: Invalid channel ID: %d | |
| +get_channel_material_type: Invalid channel ID: %d | |
| +get_channel_material_subclass: Invalid channel ID: %d | |
| +Unknown | |
| +get_rfid_material_type name %s | |
| +get_rfid_material_type Unknown | |
| + code | |
| + fm_type: 0x%08x | |
| +get_ code %08x | |
| +get subclass_code %08x | |
| +type_num %d subclass_num %d | |
| +subclass_size %d | |
| +get_rfid_subclass name %s | |
| +set_rfid_material_info: rfid_material_info = %x | |
| +start save config to file: %s | |
| +save config to file: %s | |
| +create JSON object failed | |
| +Failed to add version to JSON object | |
| +current Version : %s | |
| +create channels array failed | |
| +channels | |
| +official_material | |
| +official_min_temp | |
| +official_max_temp | |
| +material_type | |
| +material_subclass | |
| +material_brand | |
| +0x%08X | |
| +material_color | |
| +slave_id | |
| +on_tube_len | |
| +info_reset | |
| +JSON serialize failed!!! | |
| +open file: %s failed | |
| +save default config to file: %s failed | |
| +try to open file: %s failed | |
| +memory allocation failed | |
| +JSON parse failed | |
| +'version' key not found in JSON file: %s | |
| +Version already identical: %s | |
| +Version mismatch! JSON: "%s", Expected: "%s" | |
| +success load config from file: %s | |
| +T ID %d is missing in the mapping | |
| +All T IDs from 0 to %d are present in the mapping | |
| +Invalid m_t_id_to_channel.size %lu no match size witch size: %d | |
| +T ID %d does not have a corresponding channel | |
| +Channel ID %d for T ID %d is missing in the channel status | |
| +T ID %d has a corresponding channel ID %d | |
| +Invalid box number: %d | |
| +%s box_num: %d, channel_id: %d | |
| +error print text | |
| +close m_channel_status.size() = %d, m_t_id_to_channel.size() = %d | |
| +Cleared all T command ID to channel mappings | |
| +[%s]box_num: %d, code: %d | |
| +initialize t_id_to_channel: %lu | |
| +Multi-color module channel management initialized successfully, maximum channels: %d | |
| +m_channel_status_by_t_id size: %lu | |
| +v6.4.6 | |
| +ELEGOO | |
| +PPA-CF | |
| +PPA-GF | |
| +PP-CF | |
| +PP-GF | |
| +Hyper ASA | |
| +Hyper PVA | |
| +Hyper PC | |
| +Hyper CPE | |
| +PA-CF | |
| +Hyper PA | |
| +Hyper TPU | |
| +Hyper ABS | |
| +PETG-CF | |
| +Hyper PETG | |
| +PLA+ | |
| +Hyper PLA | |
| +PLA-Silk | |
| +PLA-CF | |
| +PLA-Carbon | |
| +PLA-Matte | |
| +PLA-Fluo | |
| +PLA-Wood | |
| +BVOH | |
| +HIPS | |
| +N11multi_color24MultiColorCommandHandlerE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color_command_handler.cpp | |
| +multi_color_command_handler | |
| +cut sensor state is 0, fail to cut off filament | |
| +NSt13__future_base13_State_baseV2E | |
| +NSt13__future_base7_ResultIbEE | |
| +NSt6thread11_State_implISt12_Bind_simpleIFSt7_Mem_fnIMN11multi_color23MultiColorCommunicationEFvvEEPS4_EEEE | |
| +NSt13__future_base13_State_baseV27_SetterIbRKbEE | |
| +St23_Sp_counted_ptr_inplaceINSt13__future_base13_State_baseV2ESaIS1_ELN9__gnu_cxx12_Lock_policyE2EE | |
| +St23_Sp_counted_ptr_inplaceIN11multi_color13ModbusCommandESaIS1_ELN9__gnu_cxx12_Lock_policyE2EE | |
| +InitModbusDevice | |
| +directReadRegister | |
| +ReleaseModbus | |
| +std::future_error: | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color_communication.cpp | |
| +multi_color_comm | |
| +[%s] m_serial_port: %s, m_baud: %d retry_cnt: %d | |
| +[%s] Failed to create modbus context: %s | |
| +[%s] retry %d | |
| +Failed to create modbus context: %s | |
| +Failed to connect modbus: %s | |
| +[%s] success m_modbus_ctx:%p | |
| +MultiColorCommunication already initialized | |
| +Failed to initialize modbus device | |
| +Failed to read register: slave %d, address 0x%04X, error: %s %d | |
| +modbus is disconnect: %d | |
| +[%s] read slave_id: %d, reg_addr: 0x%04X, len: %d buffer: %p | |
| +broadcast slave_id: %d, reg_addr: 0x%04X, value: 0x%04X rc: %d modbus_strerror: %s errno: %d %p | |
| +Failed to write register: slave %d, address 0x%04X, value 0x%04X, error: %s %d | |
| +Removed register forward: handle %u, source slave %d, source addr 0x%04X, dest slave %d, dest addr 0x%04X | |
| +Register forward not found: handle %u | |
| +disabled | |
| +Set register forward %s: handle %u, source slave %d, source addr 0x%04X, dest slave %d, dest addr 0x%04X | |
| +CLOSE MODBUS | |
| +InitializeNewModbus failed | |
| +Received shutdown command | |
| +Failed to read input bits: slave %d, address 0x%04X, error: %s | |
| +Unknown command type: %d | |
| +Register already in polling list: slave %d, address 0x%04X | |
| +Added register to heartbeat_polling_registers: slave %d, address 0x%04X, interval %d ms | |
| +Added register to polling list: slave %d, address 0x%04X, interval %d ms | |
| +Removed polling register: slave %d, address 0x%04X | |
| +Polling register not found: slave %d, address 0x%04X | |
| +Register reached expected value: slave %d, address 0x%04X, value 0x%04X | |
| +Timeout waiting for register value: slave %d, address 0x%04X, expected 0x%04X | |
| +Exception in callback: %s | |
| +Register forward already exists: source slave %d, source addr 0x%04X, dest slave %d, dest addr 0x%04X | |
| +Added register forward: handle %u, source slave %d, source addr 0x%04X, dest slave %d, dest addr 0x%04X, interval %d ms | |
| +Exception in polling callback: %s | |
| +Polling thread stopped | |
| +MultiColor MultiColorCommunication initialized with port: %s, baud: %d | |
| +Modbus context not initialized or invalid destination buffer | |
| +Modbus context not initialized | |
| +MultiColor MultiColorCommunication destroyed | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIMN11multi_color16MultiColorDryingEFddEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIMN11multi_color16MultiColorDryingEFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIMN11multi_color16MultiColorDryingEFddEEE | |
| +St5_BindIFSt7_Mem_fnIMN11multi_color16MultiColorDryingEFddEEPS2_St12_PlaceholderILi1EEEE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color_drying.cpp | |
| +multi_color_drying | |
| +Failed to stop drying | |
| +Stopped drying | |
| +Drying time completed, auto stopping... | |
| +MultiColorDrying destructor called | |
| +MultiColorDrying initialize | |
| +comm_ == nullptr | |
| +Invalid temperature value: %d | |
| +Failed to write target temperature: %d | |
| +Set target temperature to %d | |
| +Invalid parameters: temperature=%d, time=%d minutes | |
| +Failed to set target temperature | |
| +Started drying with target temperature: %d | |
| +C for %d minutes | |
| +00:00:00 | |
| +MultiColorDrying structor | |
| +comm == nullptr | |
| +FvRKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEbE | |
| +NSt6thread11_State_implISt12_Bind_simpleIFPFvvEvEEEE | |
| +PFvRKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEEbE | |
| +connected | |
| +disconnected | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color_factory.cpp | |
| +multi_color_factory | |
| +Hotplug monitor thread started %d | |
| +Device %s %s | |
| +modbus_is_disconnect: %d | |
| +Hotplug monitor thread stopped | |
| +Callback execution failed: %s | |
| +Enabling power pin: %s | |
| +Disabling power pin: %s | |
| +Failed to open directory: %s | |
| +Initial serial devices: %zu found | |
| +Waiting for device initialization (3 seconds)... | |
| +Current serial devices: %zu found | |
| +usb-ShenZhenCBD_X0302_buf | |
| +Found Standard multi-color device: %s | |
| +usb-ShenZhenCBD_X0303 | |
| +Found Lite multi-color device: %s | |
| +No multi-color type specified in config, auto-detecting... | |
| +m_detected_type: %d | |
| +Detected Standard multi-color module | |
| +Detected Lite multi-color module | |
| +No multi-color module detected | |
| +STANDARD multi-color type: %d %d %d %d | |
| +Multi-color module %s %s | |
| +Multi-color module is not initialized**************************************************** | |
| +Multi-color module is detected but not initialized | |
| +register filament switch sensor state change callback------------------------------------------ | |
| +cb_colorsbox_num: %d | |
| +detected X0303 connect, detected_type: %d %d | |
| +Multi-color module is already initialized | |
| +ReleaseCommunication----------------------------------------- | |
| +NOT PRINTING:%d PAUSE:%d detected X0303 connect, detected_type: %d %d | |
| +Multi-color module is already connected or connecting: %d | |
| +InitializeCommunication failed----------------------------------------- | |
| +InitializeCommunication success------------------------------------------------ | |
| +register filament wrap sensor state change callback------------------------------------------ | |
| +InitializeCommunication----------------------------------------- | |
| +*ZN11multi_color18MultiColorObserver10initializeESt10shared_ptrINS_17MultiColorChannelEES1_INS_15MultiColorStateEES1_INS_16MultiColorDryingEEEUliRKNS_13ChannelStatusEE_ | |
| +*ZN11multi_color18MultiColorObserver10initializeESt10shared_ptrINS_17MultiColorChannelEES1_INS_15MultiColorStateEES1_INS_16MultiColorDryingEEEUlNS_11ModuleStateES8_E0_ | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color_observer.cpp | |
| +multi_color_observer | |
| +MultiColorObserver already initialized | |
| +MultiColorObserver initialize failed, channel_manager = %p, multi_color_state = %p | |
| +setChannelStatus failed, m_initialized = %d, m_channel_manager = %p | |
| +getCurrentChannelId failed, m_initialized = %d, m_channel_manager = %p | |
| +getChannelsBySlaveId failed, m_initialized = %d, m_channel_manager = %p | |
| +MultiColorObserver load config from file: %s | |
| +MultiColorObserver load config from file: %s failed | |
| +setTCommandMapping failed t_id: %d channel_id: %d | |
| +Drying manager not initialized | |
| +push_alarm_code failed, box_num: %d | |
| +FirmwareVersion: %s | |
| +N11multi_color16IMultiColorStateE | |
| +set_current_operation | |
| +set_channel_state | |
| +N11multi_color15MultiColorStateE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/multi_color_state.cpp | |
| +multi_color_state | |
| +[%s] module state change: %d -> %d------------------------------------------------------------------------------------------ | |
| +Multi-color module state management closed | |
| +Multi-color module state management initialization completed | |
| +State change callback function exception: %s | |
| +%s Invalid channel id: %d | |
| +%s Channel %d state changed from %d to %d | |
| +Multi-color module state change: %d -> %d | |
| +Multi-color module error cleared | |
| +Multi-color module error: %d - %s | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIMN11multi_color18StandardMultiColorEFvR12GCodeCommandEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIMN11multi_color18StandardMultiColorEFvR12GCodeCommandEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIMN11multi_color18StandardMultiColorEFvR12GCodeCommandEEE | |
| +St5_BindIFSt7_Mem_fnIMN11multi_color18StandardMultiColorEFvR12GCodeCommandEEPS2_St12_PlaceholderILi1EEEE | |
| +St23_Sp_counted_ptr_inplaceIN11multi_color16MultiColorDryingESaIS1_ELN9__gnu_cxx12_Lock_policyE2EE | |
| +St23_Sp_counted_ptr_inplaceIN11multi_color28StandardMultiColorOperationsESaIS1_ELN9__gnu_cxx12_Lock_policyE2EE | |
| +N11multi_color18StandardMultiColorE | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/standard_multi_color.cpp | |
| +standard_multi_color | |
| +MULTICOLOR_RESUME | |
| +Standard multi-color module destructor | |
| +Material is already unloaded, channel_id: %d | |
| +send continue load command: %d | |
| +Failed to notify device to enter loading state for channel %d | |
| +Material is already loaded, channel_id: %d | |
| +impossable load material to channel %d | |
| +Channel ID is not specified or out of range | |
| +SAVE_GCODE_STATE STATE=CHANGE_STATE | |
| +T num:%d, channel_id:%d, slave_id:%d color %08x | |
| +RESTORE_GCODE_STATE STATE=CHANGE_STATE MOVE=1 MOVE_SPEED=180 | |
| +No nodes to upgrade | |
| +Starting ymodem upgrade for %zu nodes | |
| +ymodem_update create communication, device_path: %s | |
| +Processing upgrade for node %d | |
| +write request upgrade flag to ams %d | |
| +Failed to write request upgrade flag to ams %d, continue... | |
| +standard multi-color module ymodem_update delete communication | |
| +/lib/firmware/upgrade_ams_standard.bin | |
| +ymodem_update device_path: %s firmware_path: %s | |
| +standard multi-color module ymodem_transmit | |
| +standard multi-color module ymodem_transmit %d | |
| +standard multi-color module ymodem upgrade failed ret:%d | |
| +standard multi-color module ymodem_init failed | |
| +standard multi-color module ymodem_deint | |
| +Ymodem upgrade process completed for %zu nodes | |
| +Standard multi-color operations handler communication init work completed | |
| +Found %zu nodes in bootloader state, starting upgrade process | |
| +No nodes in bootloader state, skipping upgrade process | |
| +Standard multi-color operations handler is null | |
| +total sub number: %d | |
| +m_total_sub_num: %d multi-color module connected | |
| +standard multi-color module upgrade completed | |
| +standard multi-color module not connected | |
| +Failed to read total sub number | |
| +Failed to connect to multi-color module | |
| +Standard multi-color module identification failed | |
| +Standard multi-color module ymodem update failed | |
| +Standard multi-color module initialize | |
| +Standard multi-color module base class initialization failed | |
| +m_communication.get() == nullptr | |
| +Standard multi-color module drying manager initialization | |
| +Standard multi-color module drying manager initialization failed | |
| +Standard multi-color G-code commands registered successfully | |
| +refresh all channels | |
| +init %d state | |
| +Standard multi-color module initialization completed successfully | |
| +Standard multi-color module construction completed | |
| +init init %d | |
| +St22_Maybe_get_result_typeISt7_Mem_fnIMN11multi_color28StandardMultiColorOperationsEFddEEvE | |
| +St22_Weak_result_type_implISt7_Mem_fnIMN11multi_color28StandardMultiColorOperationsEFddEEE | |
| +St17_Weak_result_typeISt7_Mem_fnIMN11multi_color28StandardMultiColorOperationsEFddEEE | |
| +St5_BindIFSt7_Mem_fnIMN11multi_color28StandardMultiColorOperationsEFddEEPS2_St12_PlaceholderILi1EEEE | |
| +rfid_timer_handle | |
| +N11multi_color28StandardMultiColorOperationsE | |
| +*ZN11multi_color28StandardMultiColorOperationsC4ERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEESt10shared_ptrINS_23MultiColorCommunicationEES9_INS_17MultiColorChannelEES9_INS_15MultiColorStateEEEUlNS_11ModuleStateESG_E_ | |
| +*ZN11multi_color28StandardMultiColorOperations24communication_init_paramEvEUlttE_ | |
| +*ZN11multi_color28StandardMultiColorOperations24communication_init_paramEvEUlttE0_ | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/core/klippy/multi_color/standard_multi_color_operations.cpp | |
| +standard_multi_color_ops | |
| +Refreshing channel %d information | |
| +Buffer sensor state changed from FULL to EMPTY, pulse count: %d | |
| +Refreshing all channels information | |
| +Invalid channel index: %d, using default register address | |
| +Channel ID: %d -> Channel Index: %d, Channel state Register: 0x%04X | |
| +channel %d is 0x%04X ready %d | |
| +channel %d is ready | |
| +now channel state::::::::::: %d :: %d | |
| +clear alarm state work | |
| +code %02x --- %02x %02x %02x %02x | |
| +get RFID card channel %d color %08x type %08x %d | |
| +/user-resource/filament_info | |
| +Starting material unloading process for channel %d (Standard version) | |
| +send target color for channel %d | |
| +send unload command: %d | |
| +Failed to notify device to enter unloading state for channel %d | |
| +G1 E-80 F1800 | |
| +wait unload done: %d | |
| +Failed to wait for material unloading completion for channel %d | |
| +update material status: %d | |
| +box:%d sensor:0x%04x | |
| +EXTRUDE_FILAMENT E=%d F=240 FAN_ON=1 REPORT=0 | |
| +channel %d continue load error: %d | |
| +G0 Z5.0 F1800 | |
| +G0 Z-5.0 F1800 | |
| +EXTRUDE_FILAMENT E=100 F=240 FAN_ON=1 REPORT=0 | |
| +EXTRUDE_FILAMENT E= | |
| + F=240 FAN_ON=1 REPORT=0 | |
| +G1 E-10 F1800 | |
| +G1 E-1.2 F1800 | |
| +starvi value %d channel id %d %d bool %d | |
| +Invalid channel index: %d, using default color registers | |
| +Channel ID: %d -> Channel Index: %d, Color Registers: R=0x%04X, G=0x%04X, B=0x%04X | |
| +send load command: %d | |
| +get 1 %d | |
| +have alarm:%02X, return false | |
| +get 2 | |
| +e axis not arrive, continue load | |
| +G1 E%d F%lf | |
| +arrive e axis, but not get load done signal | |
| +arrive e axis | |
| +G1 E50 F%lf | |
| +load done, reset load command | |
| +buffer is full, skip load | |
| +clear old materials: %d %d | |
| +clear old materials error | |
| +----------------->on_tube_len: %d | |
| +add new alarm code %d %d %d %d | |
| +resume work | |
| +resume work send %d | |
| +after alarm code %d | |
| +change to On Link Up staving %d now_channel %d bool value %d | |
| +now starving %02x channel %d | |
| +change to Out Link Up | |
| +total %d %lf | |
| +linkup_timer_handle work work | |
| +SAVE_GCODE_STATE STATE=LINK_UP_STATE | |
| +EXTRUDE_FILAMENT E=120 F=240 FAN_ON=1 REPORT=0 | |
| +RESTORE_GCODE_STATE STATE=LINK_UP_STATE MOVE=1 MOVE_SPEED=180 | |
| +e axis : %d | |
| +can't arrive e axis | |
| +Starting material loading process for channel %d (standard version) | |
| +Channel %d status: %d slave_id: %d | |
| +notify E400 start load ok | |
| +wait for E400 load ok | |
| +wait for material reach e axis ok | |
| +rank_1_motor_feed_speed | |
| +slot_motor_fast_load_speed | |
| +rank_2_motor_back_speed | |
| +rank_1_motor_back_speed | |
| +rank_2_motor_print_speed | |
| +fast_replenish_material_speed | |
| +scan_materials_speed | |
| +rank_2_motor_feed_speed | |
| +rank_3_motor_clear_step_len | |
| +rank_3_motor_clear_total_len | |
| +rank_1_motor_acc | |
| +rank_1_motor_stop_acc | |
| +rank_2_motor_acc | |
| +rank_2_motor_stop_acc | |
| +rank_1_motor_pre_feed_speed | |
| +rank_1_motor_pre_back_speed | |
| +rank_2_motor_run_I | |
| +rank_2_motor_hold_I | |
| +rank_1_motor_use_separate_speed | |
| +rank_2_motor_reduce_ratio | |
| +rank_2_motor_fast_load_length | |
| +rank_2_motor_last_load_speed | |
| +rank_3_motor_last_load_length | |
| +rank_3_motor_last_load_speed | |
| +auto_refill_filament | |
| +rank_1_motor_1_feed_speed | |
| +rank_1_motor_1_back_speed | |
| +rank_1_motor_1_acc | |
| +rank_1_motor_1_stop_acc | |
| +rank_1_motor_1_pre_feed_speed | |
| +rank_1_motor_1_pre_back_speed | |
| +rank_1_motor_2_feed_speed | |
| +rank_1_motor_2_back_speed | |
| +rank_1_motor_2_acc | |
| +rank_1_motor_2_stop_acc | |
| +rank_1_motor_2_pre_feed_speed | |
| +rank_1_motor_2_pre_back_speed | |
| +rank_1_motor_3_feed_speed | |
| +rank_1_motor_3_back_speed | |
| +rank_1_motor_3_acc | |
| +rank_1_motor_3_stop_acc | |
| +rank_1_motor_3_pre_feed_speed | |
| +rank_1_motor_3_pre_back_speed | |
| +rank_1_motor_4_feed_speed | |
| +rank_1_motor_4_back_speed | |
| +rank_1_motor_4_acc | |
| +rank_1_motor_4_stop_acc | |
| +rank_1_motor_4_pre_feed_speed | |
| +rank_1_motor_4_pre_back_speed | |
| +send slave id:%d multi color config params | |
| +use separate speed , send slave id:%d multi color config params | |
| +starving_state_timer | |
| +linkup_state_timer | |
| +rfid_state_timer | |
| +alarm_state_timer | |
| enter mp4_handle_routine | |
| rm -rf /board-resource/video_mp4 | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/devices/aic_tlp.c | |
| @@ -5594,6 +6823,7 @@ his index = %d | |
| file path = %s | |
| rm -r "%s" | |
| delete file "%s" | |
| +clear tlp paths. | |
| mkdir -p /user-resource/aic_tlp | |
| mv "%s" /user-resource/aic_tlp | |
| /board-resource/video_mp4 | |
| @@ -5717,7 +6947,7 @@ can't find machine info | |
| Centauri Carbon | |
| CHITU Printer | |
| REFERENCE | |
| -ELEGOO | |
| +rm '%s' -rf | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/devices/serial.c | |
| serial open failed: %s %s | |
| serial tcgetattr failed: %s | |
| @@ -5761,6 +6991,25 @@ DXeH | |
| uJTZ7j | |
| ld\EL | |
| n6~UNt^ | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/utils/image.c | |
| +print_file_image | |
| +can't allocate memory for line buffer | |
| +image_decompress ticks: %llu | |
| +image_decompress total pixel cnt: %d | |
| +.bmp | |
| +image base64 Ok! | |
| +data:image/bmp;base64, | |
| +1.6.37 | |
| +rowbytes %d pixelbytes %d width %d height %d color_type %d | |
| +bit_depth %d channels %d width %d height %d color_type %d | |
| +rowbytes %d xoffset %d yoffset %d pixelbytes %d | |
| +decompress jpeg header failed %s | |
| +jpeg width %d height %d subsamp %d colorspace %d | |
| +decompress jpeg data failed %s | |
| +can't allocate memory for jpeg %d %d | |
| +line : %ld | |
| +image size : %ld | |
| +bit count : %d | |
| /board-resource/log1 | |
| /board-resource/log2 | |
| [%s][%d][%s][%llu]: | |
| @@ -6191,10 +7440,23 @@ utils_params_write | |
| filepath != NULL | |
| dev_name != NULL | |
| ymodem | |
| +ymodem_init malloc ctx failed | |
| +ymodem_init malloc bus failed | |
| +ymodem_init open serial port failed | |
| +ymodem_init open file failed | |
| +ymodem_init success | |
| +ymodem_deint success | |
| Ymodem_PrepareIntialPacket %s %d | |
| +Ymodem_SendPacket data or ctx is NULL | |
| +Ymodem_SendPacket slave_addr: %d | |
| +Ymodem_SendPacket no slave_addr | |
| +%s Ymodem_SendPacket %d | |
| write failed %d %d | |
| +ymodem transmit filename: %s | |
| +send packet %d size %d | |
| ymodem_transmit falied%d | |
| ymodem_transmit SendPacket%d | |
| +total_size = %d | |
| receivedC[0] = %02x | |
| /app/resources/translation.bin | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/ui/loader/tr.c | |
| @@ -6379,7 +7641,6 @@ strlen(udhcpc_tmp_path) > 0 | |
| dns_resolv_conf_path != NULL | |
| wan_detection_url_table != NULL | |
| wan_detection_url_table_size > 0 | |
| -/dev/null | |
| (nullfp = fopen("/dev/null", "wb")) != NULL | |
| mkfifo failed: %s | |
| open fifo failed: %s | |
| @@ -6434,7 +7695,6 @@ reason=CONN_FAILED | |
| CTRL-EVENT-NETWORK-NOT-FOUND | |
| WPA-PSK | |
| WPA2-PSK | |
| -WPA2--CCMP | |
| WPA-EAP | |
| unknown pos %d:%s | |
| bssid | |
| @@ -6457,9 +7717,9 @@ DISABLE_NETWORK all | |
| disable_network all failed | |
| SCAN_RESULTS | |
| wpa_scan get scan result failed | |
| -NONE | |
| LIST_NETWORKS | |
| ADD_NETWORK | |
| +add_network failed | |
| find network id %d | |
| SET_NETWORK %d ssid "%s" | |
| SET_NETWORK %d psk "%s" | |
| @@ -6468,14 +7728,10 @@ ssid_connected | |
| ssid : %s - %s %d | |
| SET_NETWORK %d priority 5 | |
| SET_NETWORK %d priority 1 | |
| -SET_NETWORK %d pairwise CCMP | |
| set_network ssid failed | |
| set_network psk failed | |
| set_network key_mgmt failed | |
| set_network priority failed | |
| -set_network pairwise CCMP failed | |
| -SET_NETWORK %d proto RSN | |
| -set_network proto RSN failed | |
| network id | |
| append ssid %s psk %s | |
| /var/run/wpa_supplicant | |
| @@ -6520,11 +7776,10 @@ current ssid not at list | |
| [%s] scan result number: %d | |
| ssid != NULL | |
| wlan_db_remove_entry: %s | |
| -wpa_add_network failed | |
| SELECT_NETWORK %d | |
| wifi association failed. remove ssid:%s | |
| -wpa_connect %s %s %d | |
| select_network failed | |
| +wpa_connect %s %s %d | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/hl/drivers/hl_netlink_uevent.c | |
| (pfd.fd = socket(PF_NETLINK, SOCK_RAW, NETLINK_KOBJECT_UEVENT)) != -1 | |
| (bind(pfd.fd, (void *)&snl, sizeof(snl))) != -1 | |
| @@ -6536,10 +7791,7 @@ INTERFACE= | |
| hl_callback_create(&callback) == 0 | |
| hl_tpool_create_thread(&thread, netlink_uevent_thread, NULL, 0, 0, 0, 0) == 0 | |
| hl_tpool_wait_started(thread, 0) == 1 | |
| -aic_load_fw | |
| insmod %s/%s.ko | |
| -aic_btusb | |
| -aic8800_fdrv | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/hl/drivers/hl_usb_device.c | |
| hl_usb_device | |
| usb_device %04x:%04x insmod %s failed | |
| @@ -6561,7 +7813,17 @@ module_directory | |
| strlen(module_directory) > 0 | |
| 8821cu | |
| 8723du | |
| -aic8800 | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/hl/utils/cbd_workq.c | |
| +cbd_workq | |
| +CBD work queue is alreayd inited | |
| +CBD work queue create fails. ret:%d | |
| +CBD work queue create success | |
| +cbd work queue is NOT inited | |
| +cbd work queue add fails. ret:%d | |
| +cbd work queue add success | |
| +cbd work queue check don't found. | |
| +cbd work queue check del fails. ret:%d | |
| +cbd work queue check del success | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/hl/utils/hl_callback.c | |
| cb != NULL | |
| *cb != NULL | |
| @@ -6646,6 +7908,9 @@ can't allocate thread | |
| th->msg_out != NULL | |
| th->msg_in != NULL | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/hl/utils/hl_ts_queue.c | |
| +workqueue | |
| +wk_th | |
| +%s-%d | |
| /sys/class/remoteproc/remoteproc0/state | |
| simple_write open failed %s | |
| simple_write failed %s | |
| @@ -6654,7 +7919,6 @@ simple_read open failed %s | |
| dsp state=[%s] | |
| running | |
| DSP_STATE_RUNNING | |
| -offline | |
| DSP_STATE_OFFLINE | |
| DSP_STATE_UNKNOWN | |
| mem_combus open fd : %d | |
| @@ -6702,37 +7966,87 @@ BED_MESH_SET_INDEX TYPE=standard INDEX=0 | |
| BED_MESH_SET_INDEX TYPE=enhancement INDEX=0 | |
| srv_state | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app.cpp | |
| -material detection gpio error!!!!! | |
| +feed state change : %d -> %d | |
| material_detection triggered, but e_length is 0, wait | |
| material_detection triggered, e_length: %f, used: %f | |
| keying_sound | |
| get sys ota success | |
| ota task stage3 failed | |
| ota: try to update ota info next time when wifi reconnected. | |
| -material_detection | |
| +echo setbl > /sys/kernel/debug/dispdbg/command | |
| +echo lcd0 > /sys/kernel/debug/dispdbg/name | |
| +echo 0 > /sys/kernel/debug/dispdbg/param | |
| +echo 1 > /sys/kernel/debug/dispdbg/start | |
| +reboot -d %d & | |
| +fw_setenv eiot_unbind_flag 1 | |
| +set unbind flag because of factory reset | |
| +/board-resource/history.txt | |
| +rm -rf '%s' | |
| +default_gcode_copy_flag | |
| +Asia/Shanghai | |
| +ln -s /usr/share/zoneinfo/%s /etc/localtime -f | |
| +luminance_state | |
| +aic_function_switch | |
| +foreign_detection_switch | |
| power_off_resume_print | |
| +material_detection | |
| +cutting_mode | |
| +calibration_switch | |
| +detection_frequency_sec | |
| +print_platform_type | |
| +camera_light_switch | |
| +echo %d > /sys/kernel/debug/dispdbg/param | |
| resume_print_switch:%d | |
| -luminance_state | |
| tlp_switch | |
| -detection_frequency_sec | |
| aic_abnormal_pause_print | |
| -default_gcode_copy_flag | |
| /app/resources/gcode | |
| default_gcode_name = %s | |
| /app/resources/file_info | |
| /app/resources/file_info/ | |
| cp -r %s %s | |
| -calibration_switch | |
| -camera_light_switch | |
| -cutting_mode | |
| CHANGE_FILAMENT_SET_ACTIVE ACTIVE=%d | |
| -print_platform_type | |
| +set_inspection_flag : %d | |
| sdcp_video_export app_print_completed_msgbox is false | |
| -feed state change : %d -> %d | |
| -echo 0 > /sys/kernel/debug/dispdbg/param | |
| -reboot -d %d & | |
| -echo %d > /sys/kernel/debug/dispdbg/param | |
| +window change because of inspection | |
| UPDATE_IDLE_TIMER ACTIVE_TIME=%.3f | |
| +Pincode | |
| +serialNo | |
| +pcode | |
| +pincode | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_account.cpp | |
| +app_account | |
| +payload : %s | |
| +avatar img show: %s | |
| +INIT REQUEST: PINCODE | |
| +get pincode failed | |
| +INIT REQUEST:%d | |
| +user unbind failed | |
| +window changed,destroy msgbox | |
| +request 3 times failed : unbind | |
| +INIT REQUEST: unbind | |
| +INIT REQUEST : avatar | |
| +get avatar failed | |
| +request 3 times failed : avatar | |
| +INIT REQUEST: USER_INFO | |
| +get userinfo failed | |
| +account name changed %s -> %s | |
| +account name changed success | |
| +account id changed %d -> %d | |
| +load avatar because of avatar change | |
| +request 3 times failed,error | |
| +INIT REQUEST: USRE INFO | |
| +get userinfo : UNBIND | |
| +start to load user avatar | |
| +qr request finish : success | |
| +qr request finish : failed | |
| +get pincode,but timetick error,show error window | |
| +get pincode,but mqtt error,show error window | |
| +network state change : %d | |
| +bind success,go to get userinfo | |
| +qr pincode timeout,refresh pincode | |
| +local time abnormal,don't show qrcode | |
| +mqtt state change : %d | |
| +unbinde success,go to get pincode | |
| %.2f,%.2f,%.2f | |
| ErrorCode | |
| 401,%s | |
| @@ -6745,6 +8059,8 @@ ErrorCode | |
| app_calibration | |
| Automatic leveling completed! | |
| %d/%d | |
| +get_last_detection_items : %d | |
| +set_pid_target_temperature : %d | |
| PID_CALIBRATE_NOZZLE TARGET_TEMP=%d | |
| PID_CALIBRATE_NOZZLE TARGET_TEMP=220 | |
| %s:%d%% | |
| @@ -6767,35 +8083,110 @@ copy failed ! copy spent ticks %llu | |
| calculate src file(%s) md5 error! | |
| calculate dst file(%s) md5 error! | |
| %d/%d | |
| +%c%d | |
| +insert_detect | |
| +open_detect | |
| +auto_detect | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_colorsbox_control.cpp | |
| +app_colorsbox_control | |
| +filament_set_color_model1_create | |
| +none | |
| +secondChannel.material_color = %x | |
| +num % d fm type = %s | |
| + %d | |
| +loadConfigFromFile failed | |
| +loadConfigFromFile done | |
| +channelExplorer_map is empty | |
| +channelExplorer_map size: %d | |
| + INIT box_status: 0x%04x | |
| + i = %d secondChannel.material_type %d | |
| +box_status & (1 >> %d) is true | |
| +multi_box_ui_init | |
| +guide 222 | |
| +FILAMENT_SET | |
| +SET_BOX | |
| +invalid channel id: %d, in feed error!!! | |
| +--------> channel: %d feed in | |
| +MOVE_TO_EXTRUDE TARGET_TEMP=%d MOVE=1 | |
| +OUT_FEED | |
| +click BOX_BTN1 | |
| +click BOX_BTN2 | |
| +click BOX_BTN3 | |
| +click BOX_BTN4 | |
| +(box_status) is %04X | |
| +CHANGE_FILAMENT_SET_BUSY BUSY=%d | |
| +current state : | |
| +FILAMENT_TYPE_RETURN_BTN | |
| +WIDGET_ID_COLORSBOX_DRY_CONTROL_FILAMENT_TYPE_SEL_BTN | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_colorsbox_dry_ctrl.cpp | |
| +app_colorsbox_dry_ctrl | |
| +keyboard_create failed | |
| +window_copy failed | |
| +Error: set_time == 0 || set_temp == 0 | |
| +%.1f | |
| +%.1f%% | |
| +[%d] keyboard LV_EVENT_DESTROYED | |
| +[%d] keyboard LV_EVENT_CHILD_DESTROYED | |
| +keyboard_edit_index == 1 str = %s | |
| +keyboard_edit_index == 2 str = %s | |
| +keyboard null | |
| +channelsExplorer is empty for Slave ID: 2 | |
| +channelsExplorer size: %zu | |
| +channelsExplorer is empty for Slave ID: 3 | |
| +filament_new_sel_model %d | |
| +LV_EVENT_CHILD_CLICKED | |
| +i = %d fm_listitem_index %d | |
| +DESTROYED | |
| +4se | |
| +8se | |
| +12se | |
| +16se | |
| + %d | |
| +multi_color::MultiColorObserver::getInstance().getAllChannelStatus() is empty | |
| +multi_color::MultiColorObserver::getInstance().getAllChannelStatus() size: %d | |
| +cb_color_log.color_box_exist = false | |
| +cb_color_log.color_box_exist = true | |
| +cb_color_log.cb_colorsbox_num = %d | |
| +%s/%s%s | |
| +%d%s | |
| +filament_current_page = %d filament_total_page = %d | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_colorsbox_explorer.cpp | |
| +app_colorsbox_explorer | |
| +gcode | |
| + num | |
| +%d type %s ---- | |
| + i = %d color = %x | |
| +LEFT_PAGE | |
| +RIGHT_PAG | |
| +_BTN_HELP | |
| +history_listitem_update | |
| +start copy file %s -> %s | |
| +LV_EVENT_CHILD_CLICKED DSHZ_FILAMENT_CONTAINER | |
| +filament_last_page != filament_current_page %d | |
| +ASA-CF | |
| app_feed_update | |
| +0.1mm | |
| +10mm | |
| +30mm | |
| ErrorCode | |
| 302,%s | |
| ErrorCode | |
| 303,%s | |
| ErrorCode | |
| 304,%s | |
| -0.1mm | |
| -10mm | |
| -30mm | |
| %d%% | |
| -srv_control | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_control.cpp | |
| app_control | |
| -keyboard null | |
| -CHANGE_FILAMENT_SET_BUSY BUSY=%d | |
| +app_control_routine_msgbox tip_index: %d | |
| +srv_filament | |
| EXTRUDE_FILAMENT E=%d F=%d FAN_ON=1 | |
| -EXTRUDE_FILAMENT E=-%d F=%d FAN_ON=0 | |
| BED_MESH_APPLICATIONS ENABLE=0 | |
| BED_MESH_APPLICATIONS ENABLE=1 | |
| -current state : | |
| -FirstLayer.gcode | |
| -cp %s/%s %s | |
| - FirstLayer.gcode | |
| -ui_feed_type_queue create | |
| MOVE_TO_EXTRUDE TARGET_TEMP=%d MOVE=1 ZERO_Z=1 | |
| MOVE_TO_EXTRUDE TARGET_TEMP=%d MOVE=1 ZERO_Z=0 | |
| CUT_OFF_FILAMENT ZERO_Z=1 | |
| CUT_OFF_FILAMENT ZERO_Z=0 | |
| +ui_feed_type_queue create | |
| Fan model is not working | |
| Fan board_cooling_fan is not working | |
| Fan hotend_cooling_fan is not working | |
| @@ -6808,6 +8199,7 @@ CHECK_ITEM_VIBRATION | |
| CHECK_ITEM_AUTO_LEVEL | |
| lost+found | |
| file_info | |
| +eiot_avatar | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_explorer.cpp | |
| app_explorer | |
| start EXPLORER_OPERATION_COPYING | |
| @@ -6825,21 +8217,23 @@ history_total_page = %d | |
| %Y/%m/%d %H:%M | |
| %dh%dm | |
| Indexing item_list error! | |
| +window_copy file info | |
| history_explorer[%d].path | |
| item_list[%d]->path | |
| +Received file list change event, updating explorer list. | |
| +sdcp_v3 | |
| +***********************Printer::GetInstance()->m_bed_mesh->get_mesh() == nullptr********************** | |
| +***********************else********************** | |
| +***********************app_explorer_material_break_detection********************** | |
| %s:0%% | |
| /user-resource/%s%s | |
| /mnt/exUDISK/%s%s | |
| -start copy file %s -> %s | |
| cp file error! (progress:%d) | |
| operation_status : %d | |
| cp file timeout(current progress:%d)! | |
| -%s/%s%s | |
| app_keyboard_create | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_keyboard.cpp | |
| app_keyboard | |
| -keyboard_create failed | |
| -window_copy failed | |
| [%s] keyboard addr:0x%p | |
| English | |
| Espa | |
| @@ -6851,6 +8245,7 @@ app_item | |
| app_listitem_model_create | |
| app_listitem_model_destory | |
| app_main_update | |
| +APAC | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_main.cpp | |
| app_main | |
| [%s] detect newer firmware, go to upgrading window. | |
| @@ -6858,6 +8253,7 @@ app_main | |
| [%s] updating FW in the main window overtime, disable it. | |
| IP:%s | |
| 192.168.3.128 | |
| +show eiot server change msgbox | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_msgbox.cpp | |
| app_msgbox | |
| msgbox queue allocation failed | |
| @@ -6891,6 +8287,7 @@ LV_EVENT_CHILD_CLICKED wifi ssid: %s | |
| keyboard set text failed! | |
| keyboard get test failed | |
| [%s] ERROR: get wlan connection. | |
| +app_colorsbox_print_callback | |
| app_print_callback | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_print.cpp | |
| app_print | |
| @@ -6908,6 +8305,7 @@ interval_capture_layer | |
| generate_tlp_time | |
| model_limit_layer | |
| aic_print_info.tlp_test_path:%s interval_capture_layer:%d generate_tlp_time:%d model_limit_layer:%d | |
| +camera offline, stop generating | |
| SDCARD_PRINT_FILE FILESLICE=%d FILENAME="%s" | |
| %.2f%% | |
| speed slow | |
| @@ -6915,12 +8313,27 @@ speed fast | |
| >>>>>> dequeue remote control request : %d | |
| change filament check_move pause | |
| %dmm/s | |
| -CHANGE_FILAMENT_SET_CHECK_MOVE_IGNORE CHECK_MOVE_IGNORE=%d | |
| -PAUSE EXTRUDE=1 | |
| [%s] ERROR: file_item == null | |
| --/--/-- --:-- | |
| +CHANGE_FILAMENT_SET_CHECK_MOVE_IGNORE CHECK_MOVE_IGNORE=%d | |
| power_off_resume_print:%d | |
| clicked print resume | |
| +app_msgbox_push: MSGBOX_TIP_FILAMENT_PLUG_FIX | |
| +app_msgbox_push: MSGBOX_TIP_FILAMENT_PLUG_PAUSED | |
| +app_msgbox_push: MSGBOX_TIP_RESUME | |
| +change filament check_move error msgbox | |
| +SET_FAN_COVER_SENSOR ENABLE=0 | |
| +SET_WRAP_SENSOR ENABLE=0 | |
| +SET_PLUG_SENSOR ENABLE=0 | |
| +Insufficient consumables, printing is forbideen! | |
| +RESET_PLUG_SENSOR SENSOR=plug_detect_sensor | |
| +app_print_single_msgbox_callback MSGBOX_TIP_STOP | |
| +app_print_single_msgbox_callback MSGBOX_TIP_STOP wait_move == false | |
| +[%s] INFO: reset camera_disconnected_notified | |
| +RESET_PLUG_SENSOR_BASELINE SENSOR=plug_detect_sensor | |
| +SET_FAN_COVER_SENSOR ENABLE=1 | |
| +SET_WRAP_SENSOR ENABLE=1 | |
| +EIOT | |
| app_version_update_msgbox_callback | |
| fw_upgrading_download_success | |
| z_compensate_callback:compensate_set=%f | |
| @@ -6939,17 +8352,12 @@ tar -czf /user-resource/coredumps.tar.gz /user-resource/coredump-*.gz | |
| rm /user-resource/coredump-*.gz | |
| mv /user-resource/coredumps.tar.gz %s | |
| 15%s | |
| -/board-resource/history.txt | |
| -rm '%s' -rf | |
| -rm -rf '%s' | |
| -Asia/Shanghai | |
| -ln -s /usr/share/zoneinfo/%s /etc/localtime -f | |
| -aic_function_switch | |
| -foreign_detection_switch | |
| %.1lfG/%.1lfG | |
| --.--G/--.--G | |
| 256x256x256mm | |
| 3dp@elegoo.com | |
| +2CC1A1B25A0E0100 | |
| +EL3D-4.0 | |
| /user-resource/update.bin | |
| rm -r %s | |
| /user-resource/update_tmp | |
| @@ -6997,9 +8405,20 @@ ota failed: get info failed. | |
| ota download failed. | |
| [%s] ota failed: get info failed. | |
| resume print switch:%d | |
| +material_detection_switch:%d | |
| %s%s%s%s | |
| SET_LED_led2 RED=1 GREEN=1 BLUE=1 WHITE=1 TRANSMIT=1 | |
| SET_LED_led2 RED=0 GREEN=0 BLUE=0 WHITE=0 TRANSMIT=1 | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_startup_account.cpp | |
| +app_startup_account | |
| +ID:%d | |
| +enter app_startup_account_callback | |
| +exit app_startup_account_callback | |
| +unbind_flag did't clear,show error window | |
| +wlan_event_update | |
| +wlan_callback | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_startup_network.cpp | |
| +app_startup_network | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_timezone.cpp | |
| app_timezone | |
| timezone_index:%d -> %s | |
| @@ -7053,17 +8472,53 @@ ErrorCode | |
| 701,%s | |
| ErrorCode | |
| 702,%s | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_top.cpp | |
| +app_top | |
| +%d box alrm: %04x | |
| +box %d :%s | |
| +unknown error! | |
| routine_msgbox_tip_index = %d | |
| cancel resume print: time<%lf>,layer<%d>,filament_used<%lf> | |
| break_save_name = %s | |
| break_save_path = %s | |
| exceptional_temp_status = %d | |
| fan_status = %d | |
| -/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/app/e100/app_top.cpp | |
| -app_top | |
| +Fan cover is removed | |
| +filament wrap sensor | |
| +filament plug sensor | |
| Camera offline | |
| serial data error popup = %s | |
| +heater current temperature: %f. | |
| +The temperature of box is detected as too high. (%d / 5) | |
| +Box temp error. | |
| +end printing... | |
| +start printing... | |
| +no color box | |
| +color box size:%d | |
| echo 255 > /sys/kernel/debug/dispdbg/param | |
| +Please select channel | |
| +Five way jam! | |
| +T channel map error! | |
| +Channel is already loaded! | |
| +Channel is already unloaded! | |
| +Channel is busy! | |
| +Channel1 Load material failed! | |
| +Channel2 Load material failed! | |
| +Channel3 Load material failed! | |
| +Channel4 Load material failed! | |
| +Channel1 Unload material failed! | |
| +Channel2 Unload material failed! | |
| +Channel3 Unload material failed! | |
| +Channel4 Unload material failed! | |
| +start auto refill filament! | |
| +auto refill filament failed! | |
| +identify active channel failed! | |
| +cut off filament failed! | |
| +multi color resume failed! | |
| +multi color lacking materails failed! | |
| +X0303 | |
| +X0303 | |
| +load before must preload | |
| utils_explorer_update_items | |
| utils_explorer_count_recursive | |
| utils_explorer_global_search_recursive | |
| @@ -7102,10 +8557,30 @@ E=%.2lf | |
| F=%.2lf | |
| G28 | |
| SET_FAN_SPEED I=%d S=%f | |
| +PAUSE EXTRUDE= | |
| + MOVE= | |
| +light | |
| +platformtype | |
| +power_off_resume | |
| +CHANGE_FILAMENT_SET_BUSY BUSY=1 | |
| +ELEGOO_LOAD_FILAMENT ZERO_Z=1 TARGET_TEMP= | |
| +ELEGOO_LOAD_FILAMENT ZERO_Z=0 TARGET_TEMP= | |
| +ELEGOO_UNLOAD_FILAMENT ZERO_Z=1 PRINT_START= | |
| +ELEGOO_UNLOAD_FILAMENT ZERO_Z=0 PRINT_START= | |
| +ELEGOO_LOAD_FILAMENT_REQUEST_SUCCESS PRINT_START= | |
| +srv_state_custom_filament_switch_subscribe_callback | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/service/srv_state.cpp | |
| +%s msg_id: %d | |
| +print_speed_model | |
| +srv_status | |
| +status_error | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/service/srv_status.cpp | |
| +status publish : %d | |
| +status error publish : %d | |
| +status_msg->status : %d | |
| 0.0.0 | |
| sdcp_v3_http_mjpeg_stream_routine | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/sdcp/sdcp_v3.cpp | |
| -sdcp_v3 | |
| camera stop | |
| udp open socket failed %s | |
| udp setsockopt reuseaddr failed %s | |
| @@ -7283,6 +8758,7 @@ axis or step is null | |
| device is busy,can't move | |
| sdcp break_save action = %d | |
| sdcp break_save action is NULL | |
| +filter break_save message: print_state = %d | |
| filter break_save message | |
| sdcp break_save_name = %s | |
| sdcp break_save_path = %s | |
| @@ -7314,11 +8790,19 @@ sdcp video_export complete | |
| %s:%d/video | |
| VideoUrl | |
| TargetFanSpeed | |
| +device is busy,can't set status | |
| model_fan_json->valueint : %d | |
| auxiliary_fan_json->valueint : %d | |
| box_fan_json->valueint : %d | |
| MainLight | |
| -device is busy,can't set status | |
| +Calibration_switch | |
| +PrintPlatformType | |
| +Tlp_Switch | |
| +filename : %s | |
| +calibration_switch : %d | |
| +platform : %d | |
| +start print : %s | |
| +mising probe data | |
| request id not found | |
| From | |
| from not found | |
| @@ -7328,14 +8812,6 @@ cmd or data not found | |
| hl_tpool_create_thread(&sdcp_v3_d_handler_thread, sdcp_v3_dh_routine, NULL, sizeof(sdcp_v3_thread_event_t), 128, 0, 0) == 0 | |
| hl_tpool_wait_started(sdcp_v3_d_handler_thread, 0) == 1 | |
| HistoryDetailList | |
| -Calibration_switch | |
| -PrintPlatformType | |
| -Tlp_Switch | |
| -filename : %s | |
| -calibration_switch : %d | |
| -platform : %d | |
| -start print : %s | |
| -mising probe data | |
| request status | |
| request attribute | |
| start print | |
| @@ -7408,12 +8884,6 @@ RTC_Svc_Start failed | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/EIOT/Agora_RTC.cpp | |
| Agora_RTC | |
| [conn-%u] on_audio_data, uid %u sent_ts %u data_type %d, len %zu | |
| -Not enough uplink bandwdith. Error msg "%s" | |
| -Invalid App ID. Please double check. Error msg "%s" | |
| -Invalid channel name for conn_id %u. Please double check. Error msg "%s" | |
| -Invalid token. Please double check. Error msg "%s" | |
| -Dynamic token is enabled but is not provided. Error msg "%s" | |
| -Error %d is captured. Error msg "%s" | |
| [conn-%u] on_video_data: uid %u sent_ts %u data_type %d frame_type %d stream_type %d len %zu | |
| [conn-%u] Frame loss detected. Please notify the encoder to generate key frame immediately | |
| [conn-%u] video: uid=%u muted=%d | |
| @@ -7422,10 +8892,15 @@ Error %d is captured. Error msg "%s" | |
| [conn-%u] Remote user "%u" has joined the channel, elapsed %d ms | |
| [conn-%u] Rejoin the channel successfully, uid %u elapsed %d ms | |
| [conn-%u] Lost connection from the channel | |
| +Not enough uplink bandwdith. Error msg "%s" | |
| +Invalid App ID. Please double check. Error msg "%s" | |
| +Invalid channel name for conn_id %u. Please double check. Error msg "%s" | |
| +Invalid token. Please double check. Error msg "%s" | |
| +Dynamic token is enabled but is not provided. Error msg "%s" | |
| +Error %d is captured. Error msg "%s" | |
| +[conn-%u] Join the channel %s successfully, uid %u elapsed %d ms | |
| License verified failed, reason: %d | |
| License verified failed, License: %s | |
| -[conn-%u] Join the channel %s successfully, uid %u elapsed %d ms | |
| -cbd queue create %d %p | |
| Rtc alread init | |
| /data/ | |
| Failed to initialize Agora sdk, reason: %s | |
| @@ -7440,50 +8915,173 @@ token : %s | |
| license : %s | |
| is_init : %d | |
| verify_rtsa_init_condition failed | |
| +cbd queue create %d %p | |
| +connected & camera is ready | |
| +disconnected or camera disconnect | |
| +Failed to send video data , reason: (%d)%s | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/EIOT/Agora_RTM.cpp | |
| Agora_RTM | |
| [peer-%s] result callback: msg_id=%u, state=%u | |
| <<<<<<<<<<<<<<<<<< user_id[%s] event id[%u], event code[%u] >>>>>>>>>>>>>>>>>> | |
| +RTM login success | |
| +INIT REQUEST: BIND | |
| +request bind timeout! : %d | |
| +bind success,EIOT_binded: %d | |
| +user bind failed | |
| +rtm logout failed! ret : %d | |
| <<<<<<<<<<<<<<<<<< rtm_dev_login_rtm >>>>>>>>>>>>>>>>>> | |
| device rtm id : %s | |
| -token : %s | |
| rtm login failed! ret : %d | |
| -rtm logout failed! ret : %d | |
| RTM alread init | |
| user_id : %s | |
| rtm_connected : %d | |
| verify_rtm_login_condition failed | |
| RTM %s | |
| APP -> Device:%s | |
| +0.0.0 | |
| +Belong | |
| +1.0.0 | |
| +ProVer | |
| +MachineType | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/EIOT/Agora_RTM_API.cpp | |
| +Agora_RTM_API | |
| +send rtm data failed! ret:%d | |
| +Device -> APP:%s | |
| +TopState | |
| +LevelState | |
| +Camera | |
| +XHome | |
| +XPost | |
| +YHome | |
| +YPost | |
| +ZHome | |
| +ZPost | |
| +NozzleHome | |
| +ChamberFan | |
| +NozzleTemp | |
| +BedTemp | |
| +ChamberTemp | |
| +PlatformType | |
| +PoweroffRecovery | |
| +FilamentDetect | |
| +Inspection | |
| +InputShaper | |
| +NozzlePid | |
| +BedLevel | |
| +TaskID | |
| +Process | |
| +rtm_event_report error : %d | |
| +printing | |
| +TaskUID | |
| +PrintState | |
| +StateReason | |
| +RemainTicks | |
| +ShootState | |
| +PreViewImage | |
| +ImagePushed | |
| +1.1.1 | |
| +ExtruderMaxTemp | |
| +BedMaxTemp | |
| +rtm_print_pause_operation | |
| +rtm_print_stop_operation | |
| +rtm_print_resume_operation | |
| +PrintTime | |
| +HistoryList | |
| +HistorySampleInfo | |
| +TaskUIDList | |
| +The parameter is incorrect | |
| +history_num : %d | |
| +Printing cannot be deleted! | |
| +set mask : %s(%d) | |
| +rtm_get_file_list | |
| +!Error: Cant't open dir. | |
| +.p_exp | |
| +file_child:%s | |
| +payload:%s | |
| +machine_info.machine_marking | |
| +rtm_get_file_info | |
| +FilePath | |
| +file_path_trans : %s | |
| +Filament | |
| +Dist | |
| +array_Axis not found | |
| +array_Axis:%s | |
| +Dir:%d | |
| +Dist:%llf | |
| +get_move_asix_distance:%d,%f | |
| +move_request.x:%f | |
| +move_request.y:%f | |
| +move_request.z:%f | |
| +move_request.e:%f | |
| +move_request.:%f | |
| +rtm_motor_unlock | |
| +InputShaper : %d | |
| +NozzlePid : %d | |
| +TargetNozzleTemp | |
| +BedLevel : %d | |
| +PlatformType : %s | |
| +TargetNozzleTemp->valueint : %d | |
| +rtm_close_device_calibration | |
| +FileName not found | |
| +TaskID not found | |
| +rtm_model_file_download | |
| +Url / TaskID / Md5 not found | |
| +rtm_change_machine_name | |
| +rtm_machine_status_control | |
| +ChamberFanStatus | |
| +Zoffset | |
| +TempTargetHotbed->valueint : %d | |
| +TempTargetNozzle->valueint : %d | |
| +ModelFan->valueint : %d | |
| +AuxiliaryFan->valueint : %d | |
| +ChamberFanStatus->valueint : %d | |
| +Light->valuedoble : %d | |
| +Zoffset->valuedoble : %llf | |
| +PrintSpeedPct->valueint : %d | |
| +PlatformType->valueint : %d | |
| +FilamentDetect->valueint : %d | |
| +PoweroffRecovery->valueint : %d | |
| +Tlp_Switch->valueint : %d | |
| +rtm_print_start_operation | |
| +Filename : %s | |
| +Calibration_switch : %d | |
| +PrintPlatformType : %d | |
| https://device.elegoo.com.cn | |
| https://eu-device.elegoo.com | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/EIOT/EH_API.cpp | |
| EH_API | |
| DELETE | |
| +hl_curl_put failed: %d | |
| +opendir failed | |
| +coredump- | |
| +has_coredump_files : %d | |
| inited != TRUE | |
| request == NULL | |
| malloc failed | |
| -request == NULL | |
| *request == NULL | |
| agora_deinit_request finish | |
| agora_get_request_result : %d | |
| -*request == NULL | |
| agora_deinit_request self | |
| 070f6f7f15524a5trc20da47e0e93857 | |
| %s%s%d | |
| sign test[%d][%d] : %s | |
| out string : %s | |
| %s/elegoo/printer/pincode | |
| -serialNo | |
| 82090b23yh57493392c9718b330e83be | |
| timestamp | |
| %s:%d | |
| curl get failed , %d | |
| curl get success (pincode), %s | |
| -pincode | |
| expiresIn | |
| pincode : %s , expiresIn : %d | |
| curl info parse error! | |
| +%s/elegoo/printer/user/info | |
| +curl get success (userinfo), %s | |
| +nickName | |
| +avatarMd5 | |
| +avatarPath | |
| +%d - %s - %s - %s - %s | |
| +/user-resource/eiot_avatar | |
| %s/%s.%s.tmp | |
| open file %s error | |
| %s/elegoo/printer/download/avatar | |
| @@ -7491,7 +9089,6 @@ _EIOT_get2 failed , %d | |
| _EIOT_get2 %s ok! | |
| md5 check success | |
| md5 check failed | |
| -APAC | |
| %s/elegoo/printer/cloud/config?region=%s | |
| curl server parse init! | |
| curl get success (serverinfo), %s | |
| @@ -7514,25 +9111,38 @@ access preview %s failed | |
| Content-Type: multipart/form-data | |
| curl put failed , %d | |
| curl put success (preview), %s | |
| +dst filepath == NULL | |
| +/board-resource/tmp | |
| +mkdir "%s" error | |
| +cp /board-resource/lastlog "%s" | |
| +mv /user-resource/coredumps.tar.gz "%s" | |
| +chdir "%s" failed | |
| +rm -rf "%s" | |
| +tar -cf "%s" * | |
| +Error occurred while creating file %s | |
| +%s/elegoo/printer/upload/log | |
| +curl put success (log), %s | |
| %s/elegoo/printer/upload/tlp | |
| curl get success (tlp), %s | |
| -%s/elegoo/printer/message/batch | |
| +%s/elegoo/printer/name | |
| Content-Type: application/json | |
| +curl get success (verify_name), %s | |
| +%s/elegoo/printer/message/batch | |
| +Get print history (task_id:%s): success ,print_report_state: %d, print_state: %d | |
| +printState | |
| +stateReason | |
| +content | |
| +errorReason | |
| +-- system info -- | |
| +payload : %s | |
| +-- system info -- | |
| +payload : NULL | |
| curl post failed , %d | |
| curl post success (info), %s | |
| -Jupiter 2 | |
| %s/elegoo/printer/agora/config?pcode=%s | |
| url = %s | |
| curl get success (config), %s | |
| -appId | |
| -license | |
| appId : %s , license : %s | |
| -%s/elegoo/printer/user/info | |
| -curl get success (userinfo), %s | |
| -nickName | |
| -avatarMd5 | |
| -avatarPath | |
| -%d - %s - %s - %s - %s | |
| %s/elegoo/printer/agora/token | |
| curl get success (token), %s | |
| rtcToken | |
| @@ -7543,54 +9153,175 @@ userId | |
| rtc_token : %s , rtc_expiresIn : %d | |
| rtm_token : %s , rtm_expiresIn : %d | |
| user_id : %s ,user_id_num : %d | |
| -TempSensor | |
| -Tank | |
| -ZMotor | |
| -Camera | |
| -AutoFeed | |
| F14CBD_ERROR_CODEP5cJSONPvS2_S2_E | |
| PF14CBD_ERROR_CODEP5cJSONPvS2_S2_E | |
| +idle | |
| +leveling | |
| +resonance | |
| +upgrading | |
| +copying | |
| +transferring | |
| +heating | |
| +feeding | |
| +extruding | |
| +print_complete_tip | |
| request print status | |
| -change print params | |
| get history dir | |
| -get history details | |
| delete history | |
| motor motion | |
| motor home | |
| -motor stop | |
| -start device inspection | |
| +motor unlock | |
| +start device calibration | |
| close device inspection | |
| upload log | |
| upload tlp | |
| modle file download | |
| -illumiation light control | |
| machine name | |
| APP unbind | |
| APP binding | |
| +machine_status_control | |
| +/board-resource/eiotconf.cfg | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/EIOT/EIOT.cpp | |
| -EIOT | |
| -EIOT activate start | |
| -license[%s] | |
| +EIOT::eiot_param_init() - EIOT_CONF_PATH: %s | |
| +default_appId | |
| +default_license | |
| +default_binded_name | |
| +default_avatar_path | |
| +region_select | |
| +account_id | |
| +binded | |
| +function_enable | |
| +ParamLoad :: | |
| + appId: %s | |
| + license: %s | |
| + binded_name: %s | |
| + avatar_path: %s | |
| + binded: %d | |
| + account_id: %d | |
| + region_select: %d | |
| + function_enable: %d | |
| +ParamSave_Str :: %s : %s | |
| +ParamSave_Int :: %s : %d | |
| +ParamSave_Bool :: %s : %d | |
| EIOT::init() | |
| +EIOT service start | |
| +EIOT service not supported | |
| set binded : %d | |
| set binded_name : %s | |
| +set avatar_path : %s | |
| +set account_id : %d | |
| +remove avatar file : %s | |
| +server_change : %d | |
| +set region_select : %d | |
| +get_eiot_unbind_flag | |
| +fw_printenv | grep eiot_unbind_flag | |
| +Failed to run command | |
| +%[^=]=%d | |
| +key:%s value:%d | |
| +eiot_unbind_flag | |
| +---find eiot_unbind_flag : %d | |
| +license[%s] | |
| +appId[%s] | |
| +[Judge -> GetLicense] | |
| +get license ok | |
| +INIT REQUEST:get token | |
| +AGORA_STEP_GET_TOKEN :: user unbind | |
| +get token error, times : %d | |
| +report device name at startup | |
| +EIOT get license error | |
| +eiot_download_file_init | |
| +%s.tmp | |
| +file name: %s;file name tmp: %s | |
| +url_trans : %s | |
| +hl_curl_download_task_create failed (eiot file download) | |
| +cbd_work_queue_add failed,ret = %d | |
| +utf8_trans error | |
| ~EIOT() | |
| EIOT() | |
| +handle_status_top_in | |
| +request unbind because of factory reset | |
| +fw_setenv eiot_unbind_flag 0 | |
| +clear_unbind_flag success; eiot_unbind_flag : 0 | |
| +EIOT activate start | |
| +start up : init agora service | |
| +agora activate finish | |
| +upload_ctx.upload_status != 0 | |
| +log upload report_thread created: failed. | |
| +eh_init_request:EH_REQUEST_TYPE_LOG fail | |
| +log_upload_create success | |
| +handle_status_child_out | |
| +handle_status_child_in | |
| +top : %d, child : %d | |
| +unbind success,EIOT::binded: %d | |
| +close agora service all | |
| +INIT REQUEST : SYSTEM_REPORT | |
| +upload_report_routine start | |
| +upload_clean | |
| +upload_report_routine exit | |
| +status_changed : %d | |
| +set_verifying_upload : %d | |
| +vec_tmp empty | |
| +top: %d , child: %d | |
| +vec_tmp size : %d | |
| +vec[0] : %d | |
| +vec[0] : %d, vec[1] : %d | |
| +eiot status change type: %d | |
| +enter eiot_verify_server | |
| +INIT REQUEST : SERVER_INFO | |
| +exit eiot_verify_server | |
| +enter thread : eiot_check_upload | |
| +Get print history (task_id : %s): success ,preview_image_pushed: %d | |
| +traverse history record all : %d | |
| +-- system info -- | |
| +net connected,report system info | |
| + try to upload history item %d's preview image : %s | |
| + upload preview image : %s success ! | |
| + upload preview image : %s failed ! | |
| + info report success ! | |
| + info report failed ! | |
| +exit thread : eiot_check_upload | |
| +handle eiot unbind | |
| +handle agora_error: reinitiate agora service | |
| +handle server_change | |
| +EIOT job_handle start | |
| +EIOT job_handle :: enter print | |
| +EIOT job_handle :: exit print | |
| +-- system info -- | |
| +print complete,report system info | |
| +net status change : connected | |
| +net status change : disconnected | |
| +EIOT job_handle :: enter inspection | |
| +EIOT job_handle :: exit inspection | |
| +-- system info -- | |
| +inspection complete,report system info | |
| +pint:: try to upload preview image : %s | |
| +enter file_download_handle | |
| +progress : %d | |
| +HL_CURL_DOWNLOAD_COMPLETED,go to check md5 | |
| +open file : %s | |
| +rm -f %s | |
| +download_size : %lld | |
| +HL_CURL_DOWNLOAD_FAILED | |
| +verify progress : %d | |
| +digest: -----%s | |
| +md5: -----%s | |
| +verify ok! | |
| +%s is already exist,delete! | |
| +verify failed! | |
| +exit file_download_handle | |
| mqtt://device.elegoo.com.cn | |
| mqtt://eu-device.elegoo.com | |
| /home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/EIOT/EMQTT.cpp | |
| EMQTT | |
| handle cmd : %s | |
| get token and connect rtc rtm | |
| -AGORA_STEP_GET_TOKEN :: user unbind | |
| -get token error, times : %d | |
| +%s:%d | |
| +url : %s | |
| request appId/license ... | |
| get appId:%s | |
| get license:%s | |
| get appId/license error/timeout, license_times : %d | |
| reget token and reconnect rtc rtm | |
| -%s:%d | |
| -url : %s | |
| %lu MQTT CREATED | |
| ./ca.pem | |
| %lu MQTT ERROR %s | |
| @@ -7606,14 +9337,17 @@ enter emqtt_routine | |
| subcribe_topic : %s | |
| qos : %d | |
| EMQTT mg_mgr_init | |
| -MQTT netif internet status cut! | |
| +MQTT netif internet status cut! : %d | |
| root == NULL | |
| map[%d] - desc : %s | |
| +client_id : %s | |
| +v1/printer/rpc/request/%s | |
| emqtt msg queue create failed | |
| connect rtm | |
| disconnect rtm | |
| start net in | |
| get token and connect rtm | |
| +/home/devops/workspace/jenkins/workspace/PPL_104-PACKAGE-FIRMWARE/EIOT/eiot_net_tool.c | |
| lv_obj_add_event_cb | |
| lv_obj_remove_event_cb | |
| lv_obj_remove_event_cb_with_user_data | |
| @@ -7914,6 +9648,7 @@ kern | |
| cmap | |
| loca | |
| glyf | |
| +(T;I | |
| !"# | |
| %&''' | |
| '&()&&**'*'*+,-../.0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment