sidneyspe · May 12, 2022 13:06 · sidneyspe · Jan 15, 2021 · sidneyspe · Jan 20, 2022
diff --git a/kitty.config b/kitty.config
 # vim:fileencoding=utf-8:ft=conf:foldmethod=marker

 #: Fonts {{{

 #: kitty has very powerful font management. You can configure
 #: individual font faces and even specify special fonts for particular
 #: characters.

 font_family      Fira Code
 # bold_font        auto
 # italic_font      auto
 # bold_italic_font auto

 #: You can specify different fonts for the bold/italic/bold-italic
 #: variants. By default they are derived automatically, by the OSes
 #: font system. Setting them manually is useful for font families that
 #: have many weight variants like Book, Medium, Thick, etc. For
 #: example::

 #:     font_family      Operator Mono Book
 #:     bold_font        Operator Mono Medium
 #:     italic_font      Operator Mono Book Italic
 #:     bold_italic_font Operator Mono Medium Italic

 font_size 12.0

 #: Font size (in pts)

 # adjust_line_height  0
 # adjust_column_width 0

 #: Change the size of each character cell kitty renders. You can use
 #: either numbers, which are interpreted as pixels or percentages
 #: (number followed by %), which are interpreted as percentages of the
 #: unmodified values. You can use negative pixels or percentages less
 #: than 100% to reduce sizes (but this might cause rendering
 #: artifacts).

 # symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols

 #: Map the specified unicode codepoints to a particular font. Useful
 #: if you need special rendering for some symbols, such as for
 #: Powerline. Avoids the need for patched fonts. Each unicode code
 #: point is specified in the form U+<code point in hexadecimal>. You
 #: can specify multiple code points, separated by commas and ranges
 #: separated by hyphens. symbol_map itself can be specified multiple
 #: times. Syntax is::

 #:     symbol_map codepoints Font Family Name

 # box_drawing_scale 0.001, 1, 1.5, 2

 #: Change the sizes of the lines used for the box drawing unicode
 #: characters These values are in pts. They will be scaled by the
 #: monitor DPI to arrive at a pixel value. There must be four values
 #: corresponding to thin, normal, thick, and very thick lines.

 #: }}}

 #: Cursor customization {{{

 # cursor magenta
 cursor white

 #: Default cursor color

 # cursor_shape block

 #: The cursor shape can be one of (block, beam, underline)

 cursor_blink_interval      0
 # cursor_stop_blinking_after 15.0

 #: The interval (in seconds) at which to blink the cursor. Set to zero
 #: to disable blinking. Note that numbers smaller than repaint_delay
 #: will be limited to repaint_delay. Stop blinking cursor after the
 #: specified number of seconds of keyboard inactivity. Set to zero to
 #: never stop blinking.

 #: }}}

 #: Scrollback {{{

 # scrollback_lines 2000

 #: Number of lines of history to keep in memory for scrolling back.
 #: Memory is allocated on demand.

 # scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER

 #: Program with which to view scrollback in a new window. The
 #: scrollback buffer is passed as STDIN to this program. If you change
 #: it, make sure the program you use can handle ANSI escape sequences
 #: for colors and text formatting. INPUT_LINE_NUMBER in the command
 #: line above will be replaced by an integer representing which line
 #: should be at the top of the screen.

 # wheel_scroll_multiplier 5

 #: Modify the amount scrolled by the mouse wheel or touchpad. Use
 #: negative numbers to change scroll direction.

 #: }}}

 #: Mouse {{{

 # url_color #0087BD
 # url_style curly

 #: The color and style for highlighting URLs on mouse-over. url_style
 #: can be one of: none, single, double, curly

 # open_url_modifiers kitty_mod

 #: The modifier keys to press when clicking with the mouse on URLs to
 #: open the URL

 # open_url_with default

 #: The program with which to open URLs that are clicked on. The
 #: special value default means to use the operating system's default
 #: URL handler.

 # copy_on_select no

 #: Copy to clipboard on select. With this enabled, simply selecting
 #: text with the mouse will cause the text to be copied to clipboard.
 #: Useful on platforms such as macOS/Wayland that do not have the
 #: concept of primary selections. Note that this is a security risk,
 #: as all programs, including websites open in your browser can read
 #: the contents of the clipboard.

 # rectangle_select_modifiers ctrl+alt

 #: The modifiers to use rectangular selection (i.e. to select text in
 #: a rectangular block with the mouse)

 # select_by_word_characters :@-./_~?&=%+#

 #: Characters considered part of a word when double clicking. In
 #: addition to these characters any character that is marked as an
 #: alpha-numeric character in the unicode database will be matched.

 # click_interval 0.5

 #: The interval between successive clicks to detect double/triple
 #: clicks (in seconds)

 # mouse_hide_wait 3.0

 #: Hide mouse cursor after the specified number of seconds of the
 #: mouse not being used. Set to zero to disable mouse cursor hiding.

 # focus_follows_mouse no

 #: Set the active window to the window under the mouse when moving the
 #: mouse around

 #: }}}

 #: Performance tuning {{{

 # repaint_delay 10

 #: Delay (in milliseconds) between screen updates. Decreasing it,
 #: increases frames-per-second (FPS) at the cost of more CPU usage.
 #: The default value yields ~100 FPS which is more than sufficient for
 #: most uses. Note that to actually achieve 100 FPS you have to either
 #: set sync_to_monitor to no or use a monitor with a high refresh
 #: rate.

 # input_delay 3

 #: Delay (in milliseconds) before input from the program running in
 #: the terminal is processed. Note that decreasing it will increase
 #: responsiveness, but also increase CPU usage and might cause flicker
 #: in full screen programs that redraw the entire screen on each loop,
 #: because kitty is so fast that partial screen updates will be drawn.

 # sync_to_monitor yes

 #: Sync screen updates to the refresh rate of the monitor. This
 #: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
 #: when scrolling. However, it limits the rendering speed to the
 #: refresh rate of your monitor. With a very high speed mouse/high
 #: keyboard repeat rate, you may notice some slight input latency. If
 #: so, set this to no.

 #: }}}

 #: Terminal bell {{{

 enable_audio_bell yes

 #: Enable/disable the audio bell. Useful in environments that require
 #: silence.

 # visual_bell_duration 0.0

 #: Visual bell duration. Flash the screen when a bell occurs for the
 #: specified number of seconds. Set to zero to disable.

 window_alert_on_bell yes

 #: Request window attention on bell. Makes the dock icon bounce on
 #: macOS or the taskbar flash on linux.

 bell_on_tab yes

 #: Show a bell symbol on the tab if a bell occurs in one of the
 #: windows in the tab and the window is not the currently focused
 #: window

 #: }}}

 #: Window layout {{{

 remember_window_size  yes
 initial_window_width  640
 initial_window_height 400

 #: If enabled, the window size will be remembered so that new
 #: instances of kitty will have the same size as the previous
 #: instance. If disabled, the window will initially have size
 #: configured by initial_window_width/height, in pixels. You can use a
 #: suffix of "c" on the width/height values to have them interpreted
 #: as number of cells instead of pixels.

 enabled_layouts *

 #: The enabled window layouts. A comma separated list of layout names.
 #: The special value * means all layouts. The first listed layout will
 #: be used as the startup layout. For a list of available layouts, see
 #: the layouts.

 # window_resize_step_cells 2
 # window_resize_step_lines 2

 #: The step size (in units of cell width/cell height) to use when
 #: resizing windows. The cells value is used for horizontal resizing
 #: and the lines value for vertical resizing.

 window_border_width 1

 #: The width (in pts) of window borders. Will be rounded to the
 #: nearest number of pixels based on screen resolution. Note that
 #: borders are displayed only when more than one window is visible.
 #: They are meant to separate multiple windows.

 window_margin_width 0

 #: The window margin (in pts) (blank area outside the border)

 # single_window_margin_width -1000.0

 #: The window margin (in pts) to use when only a single window is
 #: visible. Negative values will cause the value of
 #: window_margin_width to be used instead.

 window_padding_width 4

 #: The window padding (in pts) (blank area between the text and the
 #: window border)

 active_border_color #282c34

 #: The color for the border of the active window

 inactive_border_color #22262d

 #: The color for the border of inactive windows

 # bell_border_color #ff5a00

 #: The color for the border of inactive windows in which a bell has
 #: occurred

 inactive_text_alpha .6

 #: Fade the text in inactive windows by the specified amount (a number
 #: between zero and one, with zero being fully faded).

 #: }}}

 #: Tab bar {{{

 # tab_bar_edge bottom

 #: Which edge to show the tab bar on, top or bottom

 tab_bar_margin_width 4

 #: The margin to the left and right of the tab bar (in pts)

 tab_bar_style fade

 #: The tab bar style, can be one of: fade or separator. In the fade
 #: style, each tab's edges fade into the background color, in the
 #: separator style, tabs are separated by a configurable separator.

 # tab_fade 0.25 0.5 0.75 1
 tab_fade 1 1 1

 #: Control how each tab fades into the background when using fade for
 #: the tab_bar_style. Each number is an alpha (between zero and one)
 #: that controls how much the corresponding cell fades into the
 #: background, with zero being no fade and one being full fade. You
 #: can change the number of cells used by adding/removing entries to
 #: this list.

 # tab_separator "  "

 #: The separator between tabs in the tab bar when using separator as
 #: the tab_bar_style.

 active_tab_foreground   #282c34
 active_tab_background   #abb2bf
 active_tab_font_style   bold
 inactive_tab_foreground #5c6370
 inactive_tab_background #22262d
 inactive_tab_font_style normal

 #: Tab bar colors and styles

 #: }}}

 #: Color scheme {{{

 foreground #abb2bf
 background #282c34

 #: The foreground and background colors

 # background_opacity         1.0
 # dynamic_background_opacity no

 #: The opacity of the background. A number between 0 and 1, where 1 is
 #: opaque and 0 is fully transparent.  This will only work if
 #: supported by the OS (for instance, when using a compositor under
 #: X11). Note that it only sets the default background color's
 #: opacity. This is so that things like the status bar in vim,
 #: powerline prompts, etc. still look good.  But it means that if you
 #: use a color theme with a background color in your editor, it will
 #: not be rendered as transparent.  Instead you should change the
 #: default background color in your kitty config and not use a
 #: background color in the editor color scheme. Or use the escape
 #: codes to set the terminals default colors in a shell script to
 #: launch your editor.  Be aware that using a value less than 1.0 is a
 #: (possibly significant) performance hit.  If you want to dynamically
 #: change transparency of windows set dynamic_background_opacity to
 #: yes (this is off by default as it has a performance cost)

 # dim_opacity 0.75

 #: How much to dim text that has the DIM/FAINT attribute set. One
 #: means no dimming and zero means fully dimmed (i.e. invisible).

 # selection_foreground #000000
 # selection_background #FFFACD

 #: The foreground and background for text selected with the mouse


 #: The 16 terminal colors. There are 8 basic colors, each color has a
 #: dull and bright version. You can also set the remaining colors from
 #: the 256 color table as color16 to color255.

 color0 #282c34
 color8 #596276

 #: black

 color1 #e06c75
 color9 #be5046

 #: red

 color2  #98c379
 color10 #98c379

 #: green

 color3  #e5c07b
 color11 #d19a66

 #: yellow

 color4  #61afef
 color12 #61afef

 #: blue

 color5  #c678dd
 color13 #c678dd

 #: magenta

 color6  #56b6c2
 color14 #56b6c2

 #: cyan

 color7  #abb2bf
 color15 #5c6370

 #: white

 #: }}}

 #: Advanced {{{

 # shell zsh

 #: The shell program to execute. The default value of . means to use
 #: whatever shell is set as the default shell for the current user.
 #: Note that on macOS if you change this, you might need to add
 #: --login to ensure that the shell starts in interactive mode and
 #: reads its startup rc files.

 editor nvim

 #: The console editor to use when editing the kitty config file or
 #: similar tasks. A value of . means to use the environment variable
 #: EDITOR. Note that this environment variable has to be set not just
 #: in your shell startup scripts but system-wide, otherwise kitty will
 #: not see it.

 # close_on_child_death nvim

 #: Close the window when the child process (shell) exits. If no (the
 #: default), the terminal will remain open when the child exits as
 #: long as there are still processes outputting to the terminal (for
 #: example disowned or backgrounded processes). If yes, the window
 #: will close as soon as the child process exits. Note that setting it
 #: to yes means that any background processes still using the terminal
 #: can fail silently because their stdout/stderr/stdin no longer work.

 # allow_remote_control no

 #: Allow other programs to control kitty. If you turn this on other
 #: programs can control all aspects of kitty, including sending text
 #: to kitty windows, opening new windows, closing windows, reading the
 #: content of windows, etc. Note that this even works over ssh
 #: connections.

 # startup_session none

 #: Path to a session file to use for all kitty instances. Can be
 #: overridden by using the kitty --session command line option for
 #: individual instances. See sessions in the kitty documentation for
 #: details. Note that relative paths are interpreted with respect to
 #: the kitty config directory. Environment variables in the path are
 #: expanded.

 # clipboard_control write-clipboard write-primary

 #: Allow programs running in kitty to read and write from the
 #: clipboard. You can control exactly which actions are allowed. The
 #: set of possible actions is: write-clipboard read-clipboard write-
 #: primary read-primary The default is to allow writing to the
 #: clipboard and primary selection. Note that enabling the read
 #: functionality is a security risk as it means that any program, even
 #: one running on a remote server via SSH can read your clipboard.

 # term xterm-kitty

 #: The value of the TERM environment variable to set. Changing this
 #: can break many terminal programs, only change it if you know what
 #: you are doing, not because you read some advice on Stack Overflow
 #: to change it.

 #: }}}

 #: OS specific tweaks {{{

 macos_titlebar_color #22262d

 #: Change the color of the kitty window's titlebar on macOS. A value
 #: of system means to use the default system color, a value of
 #: background means to use the background color of the currently
 #: active window and finally you can use an arbitrary color, such as
 #: #12af59 or red. WARNING: This option works by using a hack, as
 #: there is no proper Cocoa API for it. It sets the background color
 #: of the entire window and makes the titlebar transparent. As such it
 #: is incompatible with background_opacity. If you want to use both,
 #: you are probably better off just hiding the titlebar with
 #: macos_hide_titlebar.

 # macos_hide_titlebar no

 #: Hide the kitty window's title bar on macOS.

 # x11_hide_window_decorations no

 #: Hide the window decorations (title bar and window borders) on X11
 #: and Wayland. Whether this works and exactly what effect it has
 #: depends on the window manager, as it is the job of the window
 #: manager/compositor to draw window decorations.

 # macos_option_as_alt yes

 #: Use the option key as an alt key. With this set to no, kitty will
 #: use the macOS native Option+Key = unicode character behavior. This
 #: will break any Alt+key keyboard shortcuts in your terminal
 #: programs, but you can use the macOS unicode input technique.

 # macos_hide_from_tasks no

 #: Hide the kitty window from running tasks (Option+Tab) on macOS.

 # macos_quit_when_last_window_closed no

 #: Have kitty quit when all the top-level windows are closed. By
 #: default, kitty will stay running, even with no open windows, as is
 #: the expected behavior on macOS.

 #: }}}

 #: Keyboard shortcuts {{{

 #: For a list of key names, see: GLFW keys
 #: <http://www.glfw.org/docs/latest/group__keys.html>. The name to use
 #: is the part after the GLFW_KEY_ prefix. For a list of modifier
 #: names, see: GLFW mods
 #: <http://www.glfw.org/docs/latest/group__mods.html>

 #: On Linux you can also use XKB key names to bind keys that are not
 #: supported by GLFW. See XKB keys
 #: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
 #: keysyms.h> for a list of key names. The name to use is the part
 #: after the XKB_KEY_ prefix. Note that you should only use an XKB key
 #: name for keys that are not present in the list of GLFW keys.

 #: You can use the special action no_op to unmap a keyboard shortcut
 #: that is assigned in the default configuration.

 #: You can combine multiple actions to be triggered by a single
 #: shortcut, using the syntax below::

 #:     map key combine <separator> action1 <separator> action2 <separator> action3 ...

 #: For example::

 #:     map kitty_mod+e combine : new_window : next_layout

 #: this will create a new window and switch to the next available
 #: layout

 #: You can use multi-key shortcuts using the syntax shown below::

 #:     map key1>key2>key3 action

 #: For example::

 #:     map ctrl+f>2 set_font_size 20

 # kitty_mod ctrl+shift

 #: The value of kitty_mod is used as the modifier for all default
 #: shortcuts, you can change it in your kitty.conf to change the
 #: modifiers for all the default shortcuts.

 # clear_all_shortcuts no

 #: You can have kitty remove all shortcut definition seen up to this
 #: point. Useful, for instance, to remove the default shortcuts.

 #: Clipboard {{{
    
 # map cmd+c        copy_to_clipboard
 # map kitty_mod+c  copy_to_clipboard
 # map cmd+v        paste_from_clipboard
 # map kitty_mod+v  paste_from_clipboard
 # map kitty_mod+s  paste_from_selection
 # map shift+insert paste_from_selection
 # map kitty_mod+o  pass_selection_to_program

 #: You can also pass the contents of the current selection to any
 #: program using pass_selection_to_program. By default, the system's
 #: open program is used, but you can specify your own, for example::

 #:     map kitty_mod+o pass_selection_to_program firefox

 #: You can pass the current selection to a terminal program running in
 #: a new kitty window, by using the @selection placeholder::

 #:     map kitty_mod+y new_window less @selection

 #: }}}

 #: Scrolling {{{

 # map kitty_mod+up        scroll_line_up
 # map kitty_mod+k         scroll_line_up
 # map kitty_mod+down      scroll_line_down
 # map kitty_mod+j         scroll_line_down
 # map kitty_mod+page_up   scroll_page_up
 # map kitty_mod+page_down scroll_page_down
 map kitty_mod+b   scroll_page_up
 map kitty_mod+f   scroll_page_down
 # map kitty_mod+home      scroll_home
 # map kitty_mod+end       scroll_end
 # map kitty_mod+h         show_scrollback

 #: You can send the contents of the current screen + history buffer as
 #: stdin to an arbitrary program using the placeholders @text (which
 #: is the plain text) and @ansi (which includes text styling escape
 #: codes). For only the current screen, use @screen or @ansi_screen.
 #: For example, the following command opens the scrollback buffer in
 #: less in a new window::

 #:     map kitty_mod+y new_window @ansi less +G -R

 #: }}}

 #: Window management {{{

 # map kitty_mod+enter new_window
 map kitty_mod+enter no_op
 map kitty_mod+enter new_window_with_cwd

 #: You can open a new window running an arbitrary program, for
 #: example::

 #:     map kitty_mod+y      new_window mutt

 #: You can open a new window with the current working directory set to
 #: the working directory of the current window using::

 #:     map ctrl+alt+enter    new_window_with_cwd

 # map cmd+n       new_os_window
 # map kitty_mod+n new_os_window
 # map kitty_mod+w close_window
 # map kitty_mod+] next_window
 # map kitty_mod+[ previous_window
 map kitty_mod+j previous_window
 map kitty_mod+k next_window
 map kitty_mod+up move_window_forward
 map kitty_mod+down move_window_backward
 # map kitty_mod+f move_window_forward
 # map kitty_mod+b move_window_backward
 # map kitty_mod+` move_window_to_top
 # map kitty_mod+r start_resizing_window
 # map kitty_mod+1 first_window
 # map kitty_mod+2 second_window
 # map kitty_mod+3 third_window
 # map kitty_mod+4 fourth_window
 # map kitty_mod+5 fifth_window
 # map kitty_mod+6 sixth_window
 # map kitty_mod+7 seventh_window
 # map kitty_mod+8 eighth_window
 # map kitty_mod+9 ninth_window
 # map kitty_mod+0 tenth_window
 #: }}}

 #: Tab management {{{

 # map kitty_mod+right next_tab
 # map kitty_mod+left  previous_tab
 map kitty_mod+]       no_op
 map kitty_mod+]       next_tab
 map kitty_mod+[       no_op
 map kitty_mod+[       previous_tab
 # map kitty_mod+t     new_tab
 # map kitty_mod+q     close_tab
 # map kitty_mod+.     move_tab_forward
 # map kitty_mod+,     move_tab_backward
 map kitty_mod+right   no_op 
 map kitty_mod+right   move_tab_forward
 map kitty_mod+left    no_op 
 map kitty_mod+left    move_tab_backward
 # map kitty_mod+alt+t set_tab_title
 map kitty_mod+t       no_op
 map kitty_mod+t       new_tab_with_cwd

 #: You can also create shortcuts to go to specific tabs, with 1 being
 #: the first tab::

 #:     map ctrl+alt+1 goto_tab 1
 #:     map ctrl+alt+2 goto_tab 2

 #: Just as with new_window above, you can also pass the name of
 #: arbitrary commands to run when using new_tab and use
 #: new_tab_with_cwd.
 #: }}}

 #: Layout management {{{

 # map kitty_mod+l next_layout

 #: You can also create shortcuts to switch to specific layouts::

 map kitty_mod+0 no_op
 map kitty_mod+0 goto_layout stack
 map kitty_mod+9 no_op
 map kitty_mod+9 goto_layout tall
 map kitty_mod+8 no_op
 map kitty_mod+8 goto_layout fat
 #:     map ctrl+alt+t goto_layout tall
 #:     map ctrl+alt+s goto_layout stack
 #: }}}

 #: Font sizes {{{

 #: You can change the font size for all top-level kitty windows at a
 #: time or only the current one.

 map kitty_mod+equal     change_font_size all +2.0
 map kitty_mod+minus     change_font_size all -2.0
 map kitty_mod+backspace change_font_size all 0

 #: To setup shortcuts for specific font sizes::

 #:     map kitty_mod+f6 change_font_size all 10.0

 #: To setup shortcuts to change only the current window's font size::

 #:     map kitty_mod+f6 change_font_size current 10.0
 #: }}}

 #: Select and act on visible text {{{

 #: Use the hints kitten to select text and either pass it to an
 #: external program or insert it into the terminal or copy it to the
 #: clipboard.

 # map kitty_mod+e kitten hints

 #: Open a currently visible URL using the keyboard. The program used
 #: to open the URL is specified in open_url_with.

 # map kitty_mod+p>f kitten hints --type path --program -

 #: Select a path/filename and insert it into the terminal. Useful, for
 #: instance to run git commands on a filename output from a previous
 #: git command.

 # map kitty_mod+p>shift+f kitten hints --type path

 #: Select a path/filename and open it with the default open program.

 # map kitty_mod+p>l kitten hints --type line --program -

 #: Select a line of text and insert it into the terminal. Use for the
 #: output of things like: ls -1

 # map kitty_mod+p>w kitten hints --type word --program -

 #: Select words and insert into terminal.

 # map kitty_mod+p>h kitten hints --type hash --program -

 #: Select something that looks like a hash and insert it into the
 #: terminal. Useful with git, which uses sha1 hashes to identify
 #: commits


 #: The hints kitten has many more modes of operation that you can map
 #: to different shortcuts. For a full description see kittens/hints.
 #: }}}

 #: Miscellaneous {{{


 # map kitty_mod+f11    toggle_fullscreen
 # map kitty_mod+u      input_unicode_character
 # map kitty_mod+f2     edit_config_file
 # map kitty_mod+escape kitty_shell window

 #: Open the kitty shell in a new window/tab/overlay/os_window to
 #: control kitty using commands.

 # map kitty_mod+a>m set_background_opacity +0.1
 # map kitty_mod+a>l set_background_opacity -0.1
 # map kitty_mod+a>1 set_background_opacity 1
 # map kitty_mod+a>d set_background_opacity default

 #: You can tell kitty to send arbitrary (UTF-8) encoded text to the
 #: client program when pressing specified shortcut keys. For example::

 #:     map ctrl+alt+a send_text all Special text

 #: This will send "Special text" when you press the ctrl+alt+a key
 #: combination.  The text to be sent is a python string literal so you
 #: can use escapes like \x1b to send control codes or \u21fb to send
 #: unicode characters (or you can just input the unicode characters
 #: directly as UTF-8 text). The first argument to send_text is the
 #: keyboard modes in which to activate the shortcut. The possible
 #: values are normal or application or kitty or a comma separated
 #: combination of them.  The special keyword all means all modes. The
 #: modes normal and application refer to the DECCKM cursor key mode
 #: for terminals, and kitty refers to the special kitty extended
 #: keyboard protocol.

 #: Another example, that outputs a word and then moves the cursor to
 #: the start of the line (same as pressing the Home key)::

 #:     map ctrl+alt+a send_text normal Word\x1b[H
 #:     map ctrl+alt+a send_text application Word\x1bOH

 #: }}}

 map ctrl+space send_text all \x10

 # }}}

 include omni.conf
No results found