gistfile1.txt

-- Set <space> as the leader key
-- See `:help mapleader`
--  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
vim.g.mapleader = '\\'
vim.g.maplocalleader = '\\'

-- Set to true if you have a Nerd Font installed
vim.g.have_nerd_font = false

-- [[ Setting options ]]
-- See `:help vim.opt`
-- NOTE: You can change these options as you wish!
--  For more options, you can see `:help option-list`

-- Disable swap files
vim.opt.swapfile = false

-- Make line numbers default
vim.opt.number = true
-- You can also add relative line numbers, for help with jumping.
--  Experiment for yourself to see if you like it!
-- vim.opt.relativenumber = true

-- Enable mouse mode, can be useful for resizing splits for example!
vim.opt.mouse = 'a'

-- Don't show the mode, since it's already in status line
vim.opt.showmode = false

-- Sync clipboard between OS and Neovim.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.opt.clipboard = 'unnamedplus'

-- Enable break indent
vim.opt.breakindent = true

-- Save undo history
vim.opt.undofile = true

-- Case-insensitive searching UNLESS \C or capital in search
vim.opt.ignorecase = true
vim.opt.smartcase = true

-- Keep signcolumn on by default
vim.opt.signcolumn = 'no'

-- Decrease update time
vim.opt.updatetime = 250
vim.opt.timeoutlen = 300

-- Configure how new splits should be opened
vim.opt.splitright = true
vim.opt.splitbelow = true

-- Sets how neovim will display certain whitespace in the editor.
--  See `:help 'list'`
--  and `:help 'listchars'`
vim.opt.list = true
vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }

vim.opt.tabstop = 2
vim.opt.shiftwidth = 2
vim.opt.softtabstop = 2
vim.opt.expandtab = true

-- Preview substitutions live, as you type!
vim.opt.inccommand = 'split'

-- Show which line your cursor is on
vim.opt.cursorline = true

-- Minimal number of screen lines to keep above and below the cursor.
vim.opt.scrolloff = 10

-- [[ Basic Keymaps ]]
--  See `:help vim.keymap.set()`

-- Set highlight on search, but clear on pressing <Esc> in normal mode
vim.opt.hlsearch = true
vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')

-- Keybinds to make split navigation easier.
--  Use CTRL+<hjkl> to switch between windows
--
--  See `:help wincmd` for a list of all window commands
vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })

-- [[ Basic Autocommands ]]
--  See `:help lua-guide-autocommands`

-- Highlight when yanking (copying) text
--  Try it with `yap` in normal mode
--  See `:help vim.highlight.on_yank()`
vim.api.nvim_create_autocmd('TextYankPost', {
  desc = 'Highlight when yanking (copying) text',
  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
  callback = function()
    -- It was causing error after freeze
    pcall(vim.highlight.on_yank)
  end,
})

-- [[ Install `lazy.nvim` plugin manager ]]
--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
if not vim.loop.fs_stat(lazypath) then
  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)

-- [[ Configure and install plugins ]]
--
--  To check the current status of your plugins, run
--    :Lazy
--
--  You can press `?` in this menu for help. Use `:q` to close the window
--
--  To update plugins, you can run
--    :Lazy update
--
-- NOTE: Here is where you install your plugins.
require('lazy').setup({
  { -- You can easily change to a different colorscheme.
    -- Change the name of the colorscheme plugin below, and then
    -- change the command in the config to whatever the name of that colorscheme is
    --
--     'lifepillar/vim-solarized8',
--     lazy = false, -- make sure we load this during startup if it is your main colorscheme
--     priority = 1000, -- make sure to load this before all the other start plugins
--     config = function()
--       vim.cmd.colorscheme 'solarized8'
-- 
--       -- You can configure highlights by doing something like
--       vim.cmd.hi 'Comment gui=none'
--       vim.cmd.hi 'CursorLineNR cterm=none'
--     end,
     'morhetz/gruvbox',
     lazy = false, -- make sure we load this during startup if it is your main colorscheme
     priority = 1000, -- make sure to load this before all the other start plugins
     config = function()
       vim.cmd.colorscheme 'gruvbox'
 
       -- You can configure highlights by doing something like
       vim.cmd.hi 'Comment gui=none'
       vim.cmd.hi 'CursorLineNR cterm=none'
     end,
  },
  {
    "ibhagwan/fzf-lua",
    dependencies = { "nvim-tree/nvim-web-devicons" },
    config = function()
      local fzf_lua = require("fzf-lua")

      -- calling `setup` is optional for customization
      fzf_lua.setup({
        grep = {
          cmd = "rg --column --line-number --no-heading --color=always --smart-case --hidden --glob '!.git/'",
          input_prompt = 'Rg❯ ',
          rg_opts = "--hidden --column --line-number --no-heading --color=always --smart-case --glob '!.git/'"
        },
      })

      -- Keybindings
      vim.keymap.set('n', '<C-p>', fzf_lua.files)
      vim.keymap.set('n', '<C-f>', function()
        fzf_lua.grep({ search = "" })
      end)
    end
  },
  {
    "vimwiki/vimwiki",
    init = function()
      vim.g.vimwiki_list = {
        {
          path = '~/Notes/',
          index = 'Notes',
          diary_rel_path = './',
          syntax = 'markdown',
          ext = '.md',
        },
        {
          path = '~/Work/',
          index = 'Notes',
          diary_rel_path = './',
          syntax = 'markdown',
          ext = '.md',
        }
      }
    end
  },
  {
    "nvim-neo-tree/neo-tree.nvim",
    branch = "v3.x",
    dependencies = {
      "nvim-lua/plenary.nvim",
      "nvim-tree/nvim-web-devicons", -- not strictly required, but recommended
      "MunifTanjim/nui.nvim",
      -- "3rd/image.nvim", -- Optional image support in preview window: See `# Preview Mode` for more information
    }
  },
  'tpope/vim-rails',
  'tpope/vim-fugitive',
  "tpope/vim-surround",
  'junegunn/vim-easy-align',
  {
    'unblevable/quick-scope',
    init = function()
      -- Trigger a highlight in the appropriate direction when pressing these keys
      vim.g.qs_highlight_on_keys = {'f', 'F', 't', 'T'}
    end
  },
}, {
  ui = {
    -- If you have a Nerd Font, set icons to an empty table which will use the
    -- default lazy.nvim defined Nerd Font icons otherwise define a unicode icons table
    icons = vim.g.have_nerd_font and {} or {
      cmd = '⌘',
      config = '🛠',
      event = '📅',
      ft = '📂',
      init = '⚙',
      keys = '🗝',
      plugin = '🔌',
      runtime = '💻',
      require = '🌙',
      source = '📄',
      start = '🚀',
      task = '📌',
      lazy = '💤 ',
    },
  },
})

-- ...
-- The line beneath this is called `modeline`. See `:help modeline`
-- vim: ts=2 sts=2 sw=2 et