Skip to content

Instantly share code, notes, and snippets.

@lucmann
Created February 10, 2026 23:11
Show Gist options
  • Select an option

  • Save lucmann/dc15827eaf0c001efd8d199e2c2e30a3 to your computer and use it in GitHub Desktop.

Select an option

Save lucmann/dc15827eaf0c001efd8d199e2c2e30a3 to your computer and use it in GitHub Desktop.
sd-v6.19.ok
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.19.0-rc2-dirty (luc@vostro) (aarch64-linux-gnu-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44) #21 SMP PREEMPT Wed Feb 11 06:17:55 CST 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: HiKey970
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] doing early options: loglevel='7'
[ 0.000000] efi: EFI v2.6 by EDK II
[ 0.000000] efi: MEMATTR=0xbe637018 MEMRESERVE=0xba405c18
[ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000167fffff]
[ 0.000000] node 0: [mem 0x0000000016988000-0x00000000209fffff]
[ 0.000000] node 0: [mem 0x0000000020b00000-0x00000000320fffff]
[ 0.000000] node 0: [mem 0x0000000032101000-0x000000008e0fffff]
[ 0.000000] node 0: [mem 0x000000008e240000-0x00000000ba3effff]
[ 0.000000] node 0: [mem 0x00000000ba3f0000-0x00000000ba3fffff]
[ 0.000000] node 0: [mem 0x00000000ba400000-0x00000000ba438fff]
[ 0.000000] node 0: [mem 0x00000000ba439000-0x00000000ba43cfff]
[ 0.000000] node 0: [mem 0x00000000ba43d000-0x00000000ba44ffff]
[ 0.000000] node 0: [mem 0x00000000ba450000-0x00000000ba68ffff]
[ 0.000000] node 0: [mem 0x00000000ba690000-0x00000000bf65ffff]
[ 0.000000] node 0: [mem 0x00000000bf660000-0x00000000bf69ffff]
[ 0.000000] node 0: [mem 0x00000000bf6a0000-0x00000000bf6affff]
[ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6fffff]
[ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] On node 0, zone DMA: 392 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 320 pages in unavailable ranges
[ 0.000000] cma: Reserved 64 MiB at 0x00000000b0000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s56088 r8192 d29928 u94208
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/Image-hikey970-v6.19.0-rc2.gz earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rootwait rw debug loglevel=7 initcall_debug efi=noruntime dw_mmc.debug=1
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.002932] rcu: Hierarchical SRCU implementation.
[ 0.007804] rcu: Max phase no-delay instances is 1000.
[ 0.013298] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.022457] EFI runtime services will be disabled.
[ 0.027585] smp: Bringing up secondary CPUs ...
[ 0.032685] Detected VIPT I-cache on CPU1
[ 0.032749] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.033303] Detected VIPT I-cache on CPU2
[ 0.033336] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.033836] Detected VIPT I-cache on CPU3
[ 0.033868] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.034873] CPU features: detected: Spectre-v2
[ 0.034881] CPU features: detected: Spectre-v4
[ 0.034883] CPU features: detected: Spectre-BHB
[ 0.034886] CPU features: detected: ARM erratum 858921
[ 0.034891] Detected VIPT I-cache on CPU4
[ 0.034921] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.034930] arch_timer: CPU4: Trapping CNTVCT access
[ 0.034936] CPU4: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.035439] Detected VIPT I-cache on CPU5
[ 0.035458] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.035463] arch_timer: CPU5: Trapping CNTVCT access
[ 0.035467] CPU5: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.035953] Detected VIPT I-cache on CPU6
[ 0.035972] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.035977] arch_timer: CPU6: Trapping CNTVCT access
[ 0.035982] CPU6: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.036511] Detected VIPT I-cache on CPU7
[ 0.036531] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.036536] arch_timer: CPU7: Trapping CNTVCT access
[ 0.036541] CPU7: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.036588] smp: Brought up 1 node, 8 CPUs
[ 0.181018] SMP: Total of 8 processors activated.
[ 0.185776] CPU: All CPU(s) started at EL2
[ 0.189946] CPU features: detected: 32-bit EL0 Support
[ 0.195138] CPU features: detected: 32-bit EL1 Support
[ 0.200339] CPU features: detected: CRC32 instructions
[ 0.205538] CPU features: detected: PMUv3
[ 0.209626] alternatives: applying system-wide alternatives
[ 0.216536] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.225284] Memory: 5991864K/6287580K available (17152K kernel code, 2190K rwdata, 9628K rodata, 3072K init, 361K bss, 226128K reserved, 65536K cma-reserved)
[ 0.241833] devtmpfs: initialized
[ 0.251843] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.261744] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.269340] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.279353] 24608 pages in range for non-PLT usage
[ 0.279358] 516128 pages in range for PLT usage
[ 0.291708] DMI not present or invalid.
[ 0.297508] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.304645] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.312053] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.320279] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.328430] audit: initializing netlink subsys (disabled)
[ 0.334054] audit: type=2000 audit(0.220:1): state=initialized audit_enabled=0 res=1
[ 0.344779] thermal_sys: Registered thermal governor 'fair_share'
[ 0.351004] cpuidle: using governor ladder
[ 0.355172] cpuidle: using governor menu
[ 0.359507] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.366516] ASID allocator initialised with 65536 entries
[ 0.374255] Serial: AMBA PL011 UART driver
[ 0.379326] of_irq_parse_raw: /interrupt-controller@e82b0000:00000001,0000000d,0000ff08
[ 0.387565] of_irq_parse_raw: /interrupt-controller@e82b0000:00000001,0000000e,0000ff08
[ 0.395785] of_irq_parse_raw: /interrupt-controller@e82b0000:00000001,0000000b,0000ff08
[ 0.404005] of_irq_parse_raw: /interrupt-controller@e82b0000:00000001,0000000a,0000ff08
[ 0.412491] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000004a,00000004
[ 0.420797] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000004c,00000004
[ 0.429102] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000004f,00000004
[ 0.437405] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000054,00000004
[ 0.445683] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000055,00000004
[ 0.453960] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000056,00000004
[ 0.462243] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000057,00000004
[ 0.470522] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000058,00000004
[ 0.478802] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000059,00000004
[ 0.487079] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005a,00000004
[ 0.495359] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005b,00000004
[ 0.503636] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005c,00000004
[ 0.511914] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005d,00000004
[ 0.520195] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005e,00000004
[ 0.528476] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005f,00000004
[ 0.536757] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000060,00000004
[ 0.545040] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000061,00000004
[ 0.553318] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000062,00000004
[ 0.561596] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000063,00000004
[ 0.569880] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000064,00000004
[ 0.578161] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000065,00000004
[ 0.586447] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000066,00000004
[ 0.594729] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000067,00000004
[ 0.603008] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000068,00000004
[ 0.611289] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000069,00000004
[ 0.619567] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006a,00000004
[ 0.627849] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006b,00000004
[ 0.636130] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006c,00000004
[ 0.644409] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006d,00000004
[ 0.652693] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006e,00000004
[ 0.660973] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006f,00000004
[ 0.669254] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000008d,00000004
[ 0.677538] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000116,00000004
[ 0.685832] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000008b,00000004
[ 0.694241] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000008c,00000004
[ 0.702594] of_irq_parse_raw: /soc/gpio@fff0b000:00000001,00000001
[ 0.735866] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.742743] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.749082] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.755942] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.762277] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.769136] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.775469] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.782329] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.790373] ACPI: Interpreter disabled.
[ 0.795438] iommu: Default domain type: Translated
[ 0.800286] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.807158] SCSI subsystem initialized
[ 0.811822] usbcore: registered new interface driver usbfs
[ 0.817417] usbcore: registered new interface driver hub
[ 0.822827] usbcore: registered new device driver usb
[ 0.828371] mc: Linux media interface: v0.10
[ 0.832804] videodev: Linux video capture interface: v2.00
[ 0.838464] pps_core: LinuxPPS API ver. 1 registered
[ 0.843480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.852755] PTP clock support registered
[ 0.857952] Advanced Linux Sound Architecture Driver Initialized.
[ 0.865118] Bluetooth: Core ver 2.22
[ 0.868773] NET: Registered PF_BLUETOOTH protocol family
[ 0.874141] Bluetooth: HCI device and connection manager initialized
[ 0.880572] Bluetooth: HCI socket layer initialized
[ 0.885504] Bluetooth: L2CAP socket layer initialized
[ 0.890626] Bluetooth: SCO socket layer initialized
[ 0.896075] vgaarb: loaded
[ 0.899295] clocksource: Switched to clocksource arch_sys_counter
[ 0.905960] VFS: Disk quotas dquot_6.6.0
[ 0.909942] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.917583] pnp: PnP ACPI: disabled
[ 0.922255] NET: Registered PF_INET protocol family
[ 0.927410] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.938933] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.947641] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.955488] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.963792] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.972665] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.979437] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.986476] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.994163] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.001066] PCI: CLS 0 bytes, default 64
[ 1.009257] kvm [1]: nv: 568 coarse grained trap handlers
[ 1.015149] kvm [1]: IPA Size Limit: 40 bits
[ 1.021205] kvm [1]: vgic interrupt IRQ9
[ 1.025204] kvm [1]: Hyp nVHE mode initialized successfully
[ 1.033494] Initialise system trusted keyrings
[ 1.038209] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.045299] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.051318] fuse: init (API version 7.45)
[ 1.055524] 9p: Installing v9fs 9p2000 file system support
[ 1.061978] cryptd: max_cpu_qlen set to 1000
[ 1.107117] Key type asymmetric registered
[ 1.111274] Asymmetric key parser 'x509' registered
[ 1.116316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.123810] io scheduler mq-deadline registered
[ 1.128404] io scheduler kyber registered
[ 1.132501] io scheduler bfq registered
[ 1.142644] pinctrl-single e896c000.pinmux: 459 pins, size 1836
[ 1.151974] pinctrl-single fff11000.pinmux: 463 pins, size 1852
[ 1.160736] pinctrl-single e896c800.pinmux: 459 pins, size 1836
[ 1.167424] pinctrl-single fc182000.pinmux: 10 pins, size 40
[ 1.173538] pinctrl-single fc182800.pinmux: 10 pins, size 40
[ 1.179709] pinctrl-single ff37e000.pinmux: 12 pins, size 48
[ 1.185839] pinctrl-single ff37e800.pinmux: 12 pins, size 48
[ 1.194504] pinctrl-single fff11800.pinmux: 463 pins, size 1852
[ 1.203772] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000054,00000004
[ 1.212778] pl061_gpio e8a0b000.gpio: PL061 GPIO chip registered
[ 1.218989] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000055,00000004
[ 1.227728] pl061_gpio e8a0c000.gpio: PL061 GPIO chip registered
[ 1.233929] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000056,00000004
[ 1.242633] pl061_gpio e8a0d000.gpio: PL061 GPIO chip registered
[ 1.248838] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000057,00000004
[ 1.257543] pl061_gpio e8a0e000.gpio: PL061 GPIO chip registered
[ 1.263749] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000058,00000004
[ 1.272445] pl061_gpio e8a0f000.gpio: PL061 GPIO chip registered
[ 1.278648] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000059,00000004
[ 1.287355] pl061_gpio e8a10000.gpio: PL061 GPIO chip registered
[ 1.293558] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005a,00000004
[ 1.302364] pl061_gpio e8a11000.gpio: PL061 GPIO chip registered
[ 1.308566] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005b,00000004
[ 1.317274] pl061_gpio e8a12000.gpio: PL061 GPIO chip registered
[ 1.323476] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005c,00000004
[ 1.332193] pl061_gpio e8a13000.gpio: PL061 GPIO chip registered
[ 1.338396] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005d,00000004
[ 1.347139] pl061_gpio e8a14000.gpio: PL061 GPIO chip registered
[ 1.353341] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005e,00000004
[ 1.362058] pl061_gpio e8a15000.gpio: PL061 GPIO chip registered
[ 1.368259] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000005f,00000004
[ 1.376961] pl061_gpio e8a16000.gpio: PL061 GPIO chip registered
[ 1.383161] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000060,00000004
[ 1.391864] pl061_gpio e8a17000.gpio: PL061 GPIO chip registered
[ 1.398064] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000061,00000004
[ 1.406760] pl061_gpio e8a18000.gpio: PL061 GPIO chip registered
[ 1.412965] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000062,00000004
[ 1.421655] pl061_gpio e8a19000.gpio: PL061 GPIO chip registered
[ 1.427861] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000063,00000004
[ 1.436558] pl061_gpio e8a1a000.gpio: PL061 GPIO chip registered
[ 1.442761] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000064,00000004
[ 1.451498] pl061_gpio e8a1b000.gpio: PL061 GPIO chip registered
[ 1.457699] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000065,00000004
[ 1.466404] pl061_gpio e8a1c000.gpio: PL061 GPIO chip registered
[ 1.472610] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000066,00000004
[ 1.481326] pl061_gpio fff28000.gpio: PL061 GPIO chip registered
[ 1.487533] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000067,00000004
[ 1.496239] pl061_gpio fff29000.gpio: PL061 GPIO chip registered
[ 1.502442] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000068,00000004
[ 1.511161] pl061_gpio e8a1f000.gpio: PL061 GPIO chip registered
[ 1.517369] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000069,00000004
[ 1.526078] pl061_gpio e8a20000.gpio: PL061 GPIO chip registered
[ 1.532281] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006a,00000004
[ 1.541070] pl061_gpio fff0b000.gpio: PL061 GPIO chip registered
[ 1.547282] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006b,00000004
[ 1.555995] pl061_gpio fff0c000.gpio: PL061 GPIO chip registered
[ 1.562196] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006c,00000004
[ 1.570914] pl061_gpio fff0d000.gpio: PL061 GPIO chip registered
[ 1.577122] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006d,00000004
[ 1.585837] pl061_gpio fff0e000.gpio: PL061 GPIO chip registered
[ 1.592042] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006e,00000004
[ 1.600752] pl061_gpio fff0f000.gpio: PL061 GPIO chip registered
[ 1.606955] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000006f,00000004
[ 1.615673] pl061_gpio fff10000.gpio: PL061 GPIO chip registered
[ 1.621878] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000008d,00000004
[ 1.630579] pl061_gpio fff1d000.gpio: PL061 GPIO chip registered
[ 1.637606] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.665402] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.674971] msm_serial: driver initialized
[ 1.679248] SuperH (H)SCI(F) driver initialized
[ 1.694604] brd: module loaded
[ 1.705645] loop: module loaded
[ 1.714439] tun: Universal TUN/TAP device driver, 1.6
[ 1.719771] CAN device driver interface
[ 1.724438] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.729457] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.735522] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.740977] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.746690] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.753025] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.759097] sky2: driver version 1.30
[ 1.763169] PPP generic driver version 2.4.2
[ 1.767707] PPP BSD Compression module registered
[ 1.772483] PPP Deflate Compression module registered
[ 1.777610] PPP MPPE Compression module registered
[ 1.782714] usbcore: registered new interface driver asix
[ 1.788255] usbcore: registered new interface driver ax88179_178a
[ 1.794499] usbcore: registered new interface driver cdc_ether
[ 1.800481] usbcore: registered new interface driver net1080
[ 1.806286] usbcore: registered new interface driver cdc_subset
[ 1.812359] usbcore: registered new interface driver zaurus
[ 1.818094] usbcore: registered new interface driver cdc_ncm
[ 1.824118] VFIO - User Level meta-driver version: 0.3
[ 1.832218] usbcore: registered new interface driver usb-storage
[ 1.839697] mousedev: PS/2 mouse device common for all mice
[ 1.845556] usbcore: registered new interface driver xpad
[ 1.851101] usbcore: registered new interface driver usb_acecad
[ 1.857171] usbcore: registered new interface driver aiptek
[ 1.862888] usbcore: registered new interface driver hanwang
[ 1.868691] usbcore: registered new interface driver kbtab
[ 1.875502] i2c_dev: i2c /dev entries driver
[ 1.880726] usbcore: registered new interface driver uvcvideo
[ 1.887954] device-mapper: uevent: version 1.0.3
[ 1.892780] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 1.901896] Bluetooth: HCI UART driver ver 2.3
[ 1.906398] Bluetooth: HCI UART protocol H4 registered
[ 1.912132] sdhci: Secure Digital Host Controller Interface driver
[ 1.918379] sdhci: Copyright(c) Pierre Ossman
[ 1.922938] Synopsys Designware Multimedia Card Interface Driver
[ 1.929516] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.935368] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000
[ 1.935520] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,00000116,00000004
[ 1.935872] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 1.935879] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 1.935885] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 1.935891] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 1.935928] ufshcd-hisi ff3c0000.ufs: invalid ref_clk setting = 3200000
[ 1.941968] ,0000008b,00000004
[ 1.981721] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 1.993588] scsi host0: ufshcd
[ 2.015226] 00000000 fff0a000
[ 2.020563] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
[ 2.027431] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
[ 2.033851] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
[ 2.039234] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 44,32 bit host data width,256 deep fifo
[ 2.049007] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
[ 2.063011] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 2.068958] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.081453] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 2.081694] uuuuuuuuuuuuuuuuuuuuuuu dw_mci_probe: 0
[ 2.095056] hid: raw HID events driver (C) Jiri Kosina
[ 2.095085] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 2.108983] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 2.113997] usbcore: registered new interface driver usbhid
[ 2.114001] usbhid: USB HID core driver
[ 2.116620] u32 classifier
[ 2.116623] input device check on
[ 2.116625] Actions configured
[ 2.118536] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 2.118595] sd 0:0:0:0: [sda] Write Protect is off
[ 2.118703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2.118751] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes
[ 2.118754] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[ 2.127039] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 2.128316] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 2.128371] sd 0:0:0:1: [sdb] Write Protect is off
[ 2.128474] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2.128518] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes
[ 2.128520] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[ 2.136896] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 2.138192] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 2.138247] sd 0:0:0:2: [sdc] Write Protect is off
[ 2.138349] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2.138392] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes
[ 2.138395] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[ 2.149186] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 2.150428] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.150483] sd 0:0:0:3: [sdd] Write Protect is off
[ 2.150588] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2.150631] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes
[ 2.150634] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[ 2.187586] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 2.282109] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 2.282365] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 2.282367] GPT:7805956 != 15615999
[ 2.282370] GPT:Alternate GPT header not at the end of the disk.
[ 2.282371] GPT:7805956 != 15615999
[ 2.282373] GPT: Use GNU Parted to correct GPT errors.
[ 2.282392] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
[ 2.283497] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 2.283603] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.348620] xt_time: kernel timezone is -0000
[ 2.353342] Initializing XFRM netlink socket
[ 2.357793] NET: Registered PF_INET6 protocol family
[ 2.363587] Segment Routing with IPv6
[ 2.367319] In-situ OAM (IOAM) with IPv6
[ 2.371436] mip6: Mobile IPv6
[ 2.374492] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.380998] NET: Registered PF_PACKET protocol family
[ 2.382569] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 200000000Hz, actual 150000000HZ div = 0)
[ 2.396217] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
[ 2.406069] NET: Registered PF_KEY protocol family
[ 2.410929] can: controller area network core
[ 2.415353] NET: Registered PF_CAN protocol family
[ 2.420203] can: raw protocol
[ 2.423205] can: broadcast manager protocol
[ 2.427452] can: netlink gateway - max_hops=1
[ 2.431958] Bluetooth: RFCOMM TTY layer initialized
[ 2.436907] Bluetooth: RFCOMM socket layer initialized
[ 2.442136] Bluetooth: RFCOMM ver 1.11
[ 2.445950] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.451938] Bluetooth: HIDP socket layer initialized
[ 2.457334] 9pnet: Installing 9P2000 support
[ 2.486823] registered taskstats version 1
[ 2.491006] Loading compiled-in X.509 certificates
[ 2.537267] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000004a,00000004
[ 2.545968] fdf02000.serial: ttyAMA0 at MMIO 0xfdf02000 (irq = 46, base_baud = 0) is a PL011 rev2
[ 2.555320] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000004c,00000004
[ 2.563819] fdf03000.serial: ttyAMA2 at MMIO 0xfdf03000 (irq = 47, base_baud = 0) is a PL011 rev2
[ 2.573125] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000004f,00000004
[ 2.581620] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 48, base_baud = 0) is a PL011 rev2
[ 2.590703] printk: console [ttyAMA6] enabled
[ 2.590703] printk: console [ttyAMA6] enabled
[ 2.595115] printk: legacy bootconsole [pl11] disabled
[ 2.595115] printk: legacy bootconsole [pl11] disabled
[ 2.613588] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.614238] of_irq_parse_raw: /interrupt-controller@e82b0000:00000000,0000008c,00000004
[ 2.614382] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 2.615152] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.616289] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 2.616396] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[ 2.616409] cfg80211: failed to load regulatory.db
[ 2.616557] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
[ 2.616585] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
[ 2.616594] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
[ 2.616609] clk: Not disabling unused clocks
[ 2.616629] PM: genpd: Disabling unused power domains
[ 2.616636] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 49,32 bit host data width,256 deep fifo
[ 2.616692] ALSA device list:
[ 2.616695] No soundcards found.
[ 2.617038] mmc_host mmc1: card is non-removable.
[ 2.629636] check access for rdinit=/init failed: -2, ignoring
[ 2.705362] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.717991] uuuuuuuuuuuuuuuuuuuuuuu dw_mci_probe: 0
[ 2.718421] Waiting for root device /dev/mmcblk0p2...
[ 2.724918] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
[ 2.736633] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.739398] mmc1: new SDIO card at address 0001
[ 2.740139] of_irq_parse_raw: /soc/gpio@fff0b000:00000001,00000001
[ 2.741107] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[ 2.741175] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 2.741185] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
[ 2.741189] wlcore: WARNING falling back to default config
[ 2.853913] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.885471] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 2.952649] dwmmc_k3 ff37f000.dwmmc1: tuning ok best_clksmpl 11 tuning_sample_flag bff3fff3
[ 2.952662] mmc0: new UHS-I speed SDR104 SDHC card at address aaaa
[ 2.961061] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 2.966264] mmcblk0: p1 p2
[ 2.977893] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.009532] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 3.212820] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 3.216964] wlcore: loaded
[ 3.262365] EXT4-fs (mmcblk0p2): mounted filesystem c0c06305-08c4-47d4-82e9-bd7ff3bd36d2 r/w with ordered data mode. Quota mode: none.
[ 3.262459] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.263852] devtmpfs: mounted
[ 3.264793] Freeing unused kernel memory: 3072K
[ 3.264935] Run /sbin/init as init process
SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.35: No such file or directory
[ 3.553448] systemd[1]: System time before build time, advancing clock.
[ 3.564476] systemd[1]: Failed to find module 'autofs4'
[ 3.614272] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 3.614302] systemd[1]: Detected architecture arm64.
Welcome to Debian GNU/Linux 12 (bookworm)!
[ 3.663192] systemd[1]: Hostname set to <hikey970>.
[ OK ] Created slice system-getty.slice - Slice /system/getty.
[ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
[ OK ] Created slice system-seria… - Slice /system/serial-getty.
[ OK ] Created slice system-wpa_s…0m - Slice /system/wpa_supplicant.
[ OK ] Created slice user.slice - User and Session Slice.
[ OK ] Started systemd-ask-passwo…quests to Console Directory Watch.
[ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
Expecting device dev-disk-…m - /dev/disk/by-uuid/0FC2-86B6...
Expecting device dev-ttyAMA6.device - /dev/ttyAMA6...
Expecting device sys-subsy…sys/subsystem/net/devices/wlan0...
[ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
[ OK ] Reached target integrityse…Local Integrity Protected Volumes.
[ OK ] Reached target paths.target - Path Units.
[ OK ] Reached target remote-fs.target - Remote File Systems.
[ OK ] Reached target slices.target - Slice Units.
[ OK ] Reached target swap.target - Swaps.
[ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
[ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
[ OK ] Listening on systemd-journ…socket - Journal Audit Socket.
[ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
[ OK ] Listening on systemd-journald.socket - Journal Socket.
[ OK ] Listening on systemd-udevd….socket - udev Control Socket.
[ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
Mounting dev-hugepages.mount - Huge Pages File System...
Mounting dev-mqueue.mountPOSIX Message Queue File System...
Mounting sys-kernel-debug.… - Kernel Debug File System...
Starting modprobe@configfs…m - Load Kernel Module configfs...
Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
Starting modprobe@drm.service - Load Kernel Module drm...
Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
Starting modprobe@fuse.ser…e - Load Kernel Module fuse...
Starting modprobe@loop.ser…e - Load Kernel Module loop...
Starting systemd-journald.service - Journal Service...
Starting systemd-modules-l…rvice - Load Kernel Modules...
Starting systemd-remount-f…nt Root and Kernel File Systems...
Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
[ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
[ OK ] Mounted dev-mqueue.mount- POSIX Message Queue File System.
[ 4.582707] systemd-journald[1649]: /dev/kmsg buffer overrun, some messages lost.
[ 4.583417] systemd-journald[1649]: /dev/kmsg buffer overrun, some messages lost.
[ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
[ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
[ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
[ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
[ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
[ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
[ OK ] Started systemd-journald.service - Journal Service.
[ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
[ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems.
[ 4.732576] systemd-journald[1649]: /dev/kmsg buffer overrun, some messages lost.
** 215 printk messages dropped **
** 542 printk messages dropped **
** 448 printk messages dropped **
** 432 printk messages dropped **
[ 4.742957] systemd-journald[1649]: /dev/kmsg buffer overrun, some messages lost.
** 1515 printk messages dropped **
** 548 printk messages dropped **
** 9 printk messages dropped **
** 4 printk messages dropped **
Mounting sys-fs-fuse-conne… - FUSE Control File System...
Mounting sys-kernel-config…ernel Configuration File System...
Starting systemd-journal-f…h Journal to Persistent Storage...
Starting systemd-random-se…ice - Load/Save Random Seed...
Starting systemd-sysctl.se…ce - Apply Kernel Variables...
Starting systemd-sysusers.…rvice - Create System Users...
[ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
[ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System.
[ OK ] Mounted sys-kernel-config.… Kernel Configuration File System.
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
[ OK ] Finished systemd-sysusers.service - Create System Users.
Starting ifupdown-pre.serv…ynchronize boot up for ifupdown...
Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
[ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown.
[ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
[ OK ] Reached target local-fs-pr…reparation for Local File Systems.
Starting systemd-udevd.ser…ger for Device Events and Files...
[ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
[ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
[ OK ] Found device dev-disk-by\x…[0m - /dev/disk/by-uuid/0FC2-86B6.
[ 6.069381] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 6.101005] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ OK ] Found device dev-ttyAMA6.device - /dev/ttyAMA6.
[ OK ] Found device sys-subsystem… /sys/subsystem/net/devices/wlan0.
Mounting boot.mount - /boot...
[ OK ] Mounted boot.mount - /boot.
[ OK ] Reached target local-fs.target - Local File Systems.
Starting networking.service - Raise network interfaces...
Starting systemd-tmpfiles-…te System Files and Directories...
[ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch.
[ OK ] Finished systemd-tmpfiles-…eate System Files and Directories.
[ OK ] Started haveged.servicemon based on the HAVEGE algorithm.
Starting systemd-rfkill.se…Load/Save RF Kill Switch Status...
Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
[ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status.
[ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
[ OK ] Finished networking.service - Raise network interfaces.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started apt-daily.timer - Daily apt download activities.
[ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities.
[ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timeretadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused blocks once a week.
[ OK ] Started logrotate.timer - Daily rotation of log files.
[ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on dbus.socket- D-Bus System Message Bus Socket.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Started cron.service -…kground program processing daemon.
Starting dbus.service - D-Bus System Message Bus...
Starting dhcpcd.serviceClient Daemon on all interfaces...
Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots...
[ 6.878186] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ OK ] Started rngd.service -…t entro[ 6.902086] random: dbus-daemon: uninitialized urandom read (12 bytes read)
py gathering daemon (rngd).
Starting systemd-logind.se…ice - User Login Management...
[ OK ] Started wpa_supplicant@wla…pplicant daemon (interface wlan0).
[ OK ] Started dbus.service - D-Bus System Message Bus.
Starting wpa_supplicant.service - WPA supplicant...
[ 6.996817] random: wpa_supplicant: uninitialized urandom read (4096 bytes read)
[ OK ] Started systemd-logind.service - User Login Management.
[ OK ] Started wpa_supplicant.service - WPA supplicant.
[ OK ] Started dhcpcd.service…P Client Daemon on all interfaces.
[ OK ] Reached target network.target - Network.
Starting rc-local.servicem - /etc/rc.local Compatibility...
Starting ssh.service - OpenBSD Secure Shell server...
Starting systemd-user-sess…vice - Permit User Sessions...
[ OK ] Finished systemd-user-sess…ervice - Permit User Sessions.
[ 7.229378] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
[ 7.261104] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 7.353955] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 7.385682] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 7.623349] random: crng init done
[ 7.623354] random: 4 urandom warning(s) missed due to ratelimiting
[ 7.716934] wlcore: PHY firmware version: Rev 8.2.0.0.243
[ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed.
[ 7.805580] wlcore: firmware booted (Rev 8.9.0.0.83)
[ 7.823348] net_ratelimit: 20 callbacks suppressed
[FAILED] Failed to start ssh.servic…[0m - OpenBSD Secure Shell server.
See 'systemctl status ssh.service' for details.
[ OK ] Stopped ssh.service - OpenBSD Secure Shell server.
Starting ssh.service - OpenBSD Secure Shell server...
[FAILED] Failed to start ssh.servic…[0m - OpenBSD Secure Shell server.
See 'systemctl status ssh.service' for details.
[ OK ] Stopped ssh.service - OpenBSD Secure Shell server.
Starting ssh.service - OpenBSD Secure Shell server...
[FAILED] Failed to start ssh.servic…[0m - OpenBSD Secure Shell server.
See 'systemctl status ssh.service' for details.
[ OK ] Stopped ssh.service - OpenBSD Secure Shell server.
Starting ssh.service - OpenBSD Secure Shell server...
[FAILED] Failed to start ssh.servic…[0m - OpenBSD Secure Shell server.
See 'systemctl status ssh.service' for details.
[ OK ] Stopped ssh.service - OpenBSD Secure Shell server.
Starting ssh.service - OpenBSD Secure Shell server...
[FAILED] Failed to start ssh.servic…[0m - OpenBSD Secure Shell server.
See 'systemctl status ssh.service' for details.
[ OK ] Stopped ssh.service - OpenBSD Secure Shell server.
[FAILED] Failed to start ssh.servic…[0m - OpenBSD Secure Shell server.
See 'systemctl status ssh.service' for details.
[ 10.262511] rc.local[3206]: Creating SSH2 RSA key; this may take some time ...
[ 10.276935] rc.local[3285]: 3072 SHA256:wTXy7bgfMorCr4P0uyjJm9c0G0/PcNMRGA5MNJhwmsE root@hikey970 (RSA)
[ 10.290858] rc.local[3206]: Creating SSH2 ECDSA key; this may take some time ...
[ 10.305099] rc.local[3291]: 256 SHA256:KgaXE6b3tIBnfqESJz0uo0KBH1d5P/4oU6z/i8mkD30 root@hikey970 (ECDSA)
[ 10.320385] rc.local[3206]: Creating SSH2 ED25519 key; this may take some time ...
[ 10.344319] rc.local[3295]: 256 SHA256:PVdtEDzMFaitqWtmZbCtXNDn937oRcGxhzgNrREXgzI root@hikey970 (ED25519)
[ 12.269964] wlan0: authenticate with 60:3a:7c:52:9c:21 (local address=c8:df:84:51:a3:37)
[ 12.269975] wlan0: send auth to 60:3a:7c:52:9c:21 (try 1/3)
[ 12.309151] wlan0: authenticated
[ 12.311307] wlan0: associate with 60:3a:7c:52:9c:21 (try 1/3)
[ 12.320048] wlan0: RX AssocResp from 60:3a:7c:52:9c:21 (capab=0x1011 status=0 aid=6)
[ 12.328534] wlan0: associated
[ 12.485025] wlcore: Association completed.
[ 12.195584] rc.local[3344]: rescue-ssh.target is a disabled or a static unit not running, not starting it.
Starting ssh.service - OpenBSD Secure Shell server...
[ OK ] Started ssh.service - OpenBSD Secure Shell server.
[ 13.224363] rc.local[3376]: ssh.socket is a disabled or a static unit not running, not starting it.
[ OK ] Started rc-local.service - /etc/rc.local Compatibility.
[ OK ] Started serial-getty@ttyAM…ice - Serial Getty on ttyAMA6.
[ OK ] Reached target getty.target - Login Prompts.
[ OK ] Reached target multi-user.target - Multi-User System.
[ OK ] Reached target graphical.target - Graphical Interface.
Starting systemd-update-ut… Record Runlevel Change in UTMP...
[ OK ] Finished systemd-update-ut… - Record Runlevel Change in UTMP.
Debian GNU/Linux 12 hikey970 ttyAMA6
hikey970 login: [ 34.115374] ldo3: disabling
[ 34.115428] ldo4: disabling
[ 38.071969] systemd-journald[1649]: /dev/kmsg buffer overrun, some messages lost.
[ 38.072367] systemd-journald[1649]: /dev/kmsg buffer overrun, some messages lost.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment