Standard terminology for the book indexer system. Terms align with ISO 999:1996, Chicago Manual of Style, and ASI best practices.
Entry The complete unit in an index. Contains a heading, zero or more subentries, zero or more locators, and zero or more cross-references. An entry must have at least one locator OR one cross-reference.
Heading
| -- @description Master playrate - toggle between 1 and 2 | |
| -- @version 1.1 | |
| -- @author ed@edropple.com | |
| -- @changelog | |
| -- + Modified to toggle between 1x and 2x speed | |
| -- + Any other rate resets to 1x | |
| local r = reaper | |
| local rate = r.Master_GetPlayRate() |
| $ BAMBUSTUDIO_PATH=~/Downloads/Bambu_Studio_linux_fedora_v01.08.00.57-20231109141031.AppImage ./run.bash | |
| [2023-11-17 00:32:05.096348] [0x00007fade5a9cd80] [trace] Initializing StaticPrintConfigs | |
| [2023-11-17 00:32:05.210013] [0x00007fade5a9cd80] [warning] cli mode, Current BambuStudio Version 01.08.00.57 | |
| [2023-11-17 00:32:05.210030] [0x00007fade5a9cd80] [info] Will start to read model file now, file count :12 | |
| [2023-11-17 00:32:05.210040] [0x00007fade5a9cd80] [info] allow_multicolor_oneplate 1, allow_rotations 1 skip_modified_gcodes 0 avoid_extrusion_cali_region 0 loaded_filament_ids size 0, clone_objects size 0 | |
| [2023-11-17 00:32:05.210047] [0x00007fade5a9cd80] [info] plate_to_slice=0, normative_check=1, use_first_fila_as_default=0 | |
| [2023-11-17 00:32:05.210055] [0x00007fade5a9cd80] [info] read model file:3DBenchy.stl | |
| [2023-11-17 00:32:05.230063] [0x00007fade5a9cd80] [debug] TriangleMesh::repair() started |
| M620 S[next_extruder]A | |
| M204 S9000 | |
| {if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)} | |
| G17 | |
| G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift | |
| {endif} | |
| G1 Z{max_layer_z + 3.0} F1200 | |
| G1 X70 F21000 | |
| G1 Y245 |
| [mcu PIS_BED] | |
| # Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify | |
| serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.3:1.0 | |
| [adxl345] | |
| cs_pin: PIS_BED:gpio13 | |
| #spi_bus: spi1a | |
| spi_software_sclk_pin: PIS_BED:gpio10 | |
| spi_software_mosi_pin: PIS_BED:gpio11 |
| # !CR-10 Smart | |
| # printer_size: 300x300x400 | |
| # version: 3.2 | |
| # This file contains pin mappings for the Creality CR-10 Smart | |
| # with a CRC-2405V1.2 board. | |
| # To use this config, during "make menuconfig" select the STM32F103 | |
| # with a "28KiB bootloader" and serial (on USART1 PA10/PA9) | |
| # MAKE SURE TO SET PA0 on startup (in the firmware). |
| #!/usr/bin/env fish | |
| # fish completion support for render | |
| function __fish_render_using_command | |
| set -l cmds __render __render_version __render_commands __render_config __render_config_schema __render_config_init __render_regions __render_repo __render_repo_from_template __render_blueprint __render_blueprint_launch __render_buildpack __render_buildpack_init __render_buildpack_remove __render_buildpack_add __render_services __render_services_show __render_services_list __render_services_tail __render_services_ssh __render_deploys __render_deploys_list __render_jobs __render_jobs_list __render_custom_domains __render_custom_domains_list __render_completions __render_completions_bash __render_completions_fish __render_completions_zsh | |
| set -l words (commandline -opc) | |
| set -l cmd "_" | |
| for word in $words | |
| switch $word | |
| case '-*' |
| tap "homebrew/cask" | |
| brew "asdf" | |
| brew "imagemagick" | |
| brew "coreutils" | |
| brew "findutils" | |
| brew "gnu-sed" | |
| brew "gnu-tar" | |
| brew "ykman" | |
| brew "gnupg" |
| # In order for gpg to find gpg-agent, gpg-agent must be running, and there must be an env | |
| # variable pointing GPG to the gpg-agent socket. This little script, which must be sourced | |
| # in your shell's init script (ie, .bash_profile, .zshrc, whatever), will either start | |
| # gpg-agent or set up the GPG_AGENT_INFO variable if it's already running. | |
| # Add the following to your shell init to set up gpg-agent automatically for every shell | |
| GPG_AGENT_SOCKET="$HOME/.gnupg/S.gpg-agent.ssh" | |
| if [ ! -S $GPG_AGENT_SOCKET ]; then | |
| gpg-agent --use-standard-socket --daemon >/dev/null 2>&1 | |
| export GPG_TTY=$(tty) |
| import { Account, DefaultAccount, DefaultUser } from 'next-auth'; | |
| import { Adapter, AdapterSession, AdapterUser, VerificationToken } from 'next-auth/adapters'; | |
| import { ProviderType } from 'next-auth/providers'; | |
| import { Client as EdgeDBClient } from 'edgedb'; | |
| import { edgeQuery, edgeTypes as t } from '../edgedb'; | |
| export class EdgeDBAdapterError extends Error {} | |
| const USER_SHAPE = { |