jmason

Recent changes in the tech scene have made it clear that relying on commercial companies to provide services I rely on isn't a good strategy in the long term, and given that Tailscale is so effective these days as a remote-access system, I've gradually been expanding a small collection of self-hosted web apps and services running on my home network.

Until now they've mainly been addressed using their IP addresses and random high ports on the internal LAN, for example:

• Pihole: http://10.19.72.7/admin
• Home Assistant: http://10.19.72.11:8123/
• Linkding: http://10.19.72.6:9092/

gruber

use AppleScript version "2.4" -- Yosemite (10.10) or later
use scripting additions

(*
Original script: John Gruber (https://daringfireball.net/linked/2023/12/05/an-applescript-for-safari-split-tabs-to-new-window)
Much more elegant version: Leon Cowle (https://github.com/leoncowle)
Even more elegant version: https://stackoverflow.com/questions/54066100/applescript-to-split-safari-tabs-into-new-window/54089865#54089865

Worth a warning: "moving" tabs with this script doesn't actually move them like
drag-and-drop does. The tabs "moved" by this script will reload in the new window,

scyto

CEPH HA Setup

Note this should only be done once you are sure you have reliable TB mesh network.

this is because proxmox UI seems fragile wrt to changing underlying network after configuration of ceph.

All installation done via command line due to gui not understanding the mesh network

This setup doesn't attempt to seperate the ceph public network and ceph cluster network (not same as proxmox clutser network), The goal is to get an easy working setup.

**2025.04.24 NOTE: some folks had to switch to IPv6 for ceph due to IPv4 unreliability issues, we think as of pve 8.4.1 and all the input the community has give to update this set of gsists - that IPv4 is now reliable even on MS-01. As such i advising everyone to use IPv4 for ceph as if you have IPv6 you will have issues with SDN at this time (if you don't use SDN this is not an issue).

scyto

ProxMox Cluster - Soup-to-Nutz

aka what i did to get from nothing to done.

note: these are designed to be primarily a re-install guide for myself (writing things down helps me memorize the knowledge), as such don't take any of this on blind faith - some areas are well tested and the docs are very robust, some items, less so). YMMV

Purpose of Proxmox cluster project

Required Outomces of cluster project

MatthiasLohr

Beelink GTR5 + Proxmox VE + Windows Guest using the Vega8 Graphics Card

Prerequisites

Hardware

• Current BIOS version: 5.19
• 1TB Kingston NVMe SSD (shipped with the device, used for system)
• 1TB Samsung 860 EVO 2.5" SATA SSD (bought additionally, for Windows 10)
• Installation images for Proxmox VE, Windows 10 (e.g. using Ventoy)

dcode

How to setup Grandstream DP750 for Unifi Talk

I've seen several posts on Reddit and other forums that say "oh you can use a grandstream phone with UniFi Talk and it's flawless". Unfortunately, I am not a VoIP engineer so it was not intuitive to me, but I got it to work. Here's how.

For this writeup, I'm using a Grandstream DP750 DECT base with a DP720 DECT wireless handset. I really wanted a wireless phone for general use in my house, but Ubiquiti doesn't make one, so I wanted to find a way. My goal is to setup UniFi Talk for my home phone solution and share a single phone number with a UniFi wired phone that sits on my office desk. As far as I know, you have to get a UniFi phone to do the initial Talk setup (though, in my tinkering, I noticed it's using a PostgreSQL database, you could probably bypass the initial setup if you knew what you were doing). I'm also using a UDM-Pro for my gateway.

Assuming your UDM-Pro management interface is on 192.168.1.1, your base station should be assigned an IP on a VL

sbyx

blueprint:
  name: Low battery level detection & notification for all battery sensors
  description: Regularly test all sensors with 'battery' device-class for crossing
    a certain battery level threshold and if so execute an action.
  domain: automation
  input:
    threshold:
      name: Battery warning level threshold
      description: Battery sensors below threshold are assumed to be low-battery (as
        well as binary battery sensors with value 'on').

DJMarlow

FLITE KEG SENSOR AND CONTROLLER DIY

This DIY will walk you through the steps to build your own Flite keg sensor and controller. Before getting started, it's recommended that you have the following tools and skills:

---

TOOLS

• Drill press with drill bits for stainless steel
• Soldering iron
• 3D printer

gavinr

blakadder

fan:
  - platform: mqtt
    name: "Diffuser"
    availability_topic: "tele/diffuser/LWT"
    payload_available: "Online"
    payload_not_available: "Offline"
    state_topic: "stat/diffuser/POWER1"
    command_topic: "cmnd/diffuser/POWER1"
    speed_state_topic: "stat/diffuser/FAN"
    payload_low_speed: low